Mercedes-Benz 7G Transmission Removing Valve Body - Part 1 of 7G ECU Electrics Plate

In this video we will be removing the valve body on the 7G transmission. See how to remove it for rebuild, repair or replacement. See parts 2 - 4 for the remainder of the procedure.
Mercedes-Benz 722.9 transmissions, also known as the 7G tronic, have been in production from model year 2003 to present. This 7 forward speed transmission with 2 reverse gears has been known to have some common problems that require servicing of the internal, valve body and ECU electrics plate. Please be aware that the ECU plate is a theft deterrent part on vehicles fitted with this 7G transmission, and a locksmith license (LSID) will be required when purchasing Theft Relevant Parts (TRP).
When a fault occurs in the ECU electronics plate also known as a conductor plate, fault codes for the Turbine Speed Sensor may be present along with symptoms like; improper shifting, Limp Home Mode all accompanied by a malfunction indicator lamp (MIL). For a complete description and list of possible fault codes please refer to our help document or contact support.
Error Code 0717 - The signal from component Y3 / 8n1 (turbine speed sensor (VGS)) is unavailable.
Error code 0718 - The component Y3 / 8n1 (turbine speed sensor (VGS)) is defective.
Error code 2767 - The signal from component Y3 / 8n2 (Internal speed sensor (VGS)) is unavailable.
Error code 2768 - The component Y3 / 8n2 (Internal speed sensor (VGS)) is defective.
(this data included in text, no in the video)
iSCAN makes complex functions simple. Check our other videos and articles for more helpful tips and procedures for Mercedes-Benz vehicles.
iSCAN sf: www.iscantech.com/iscan-sf/
iSCAN: www.iscantech.com/
Need help with a diagnostic issue. contact iSCAN Support On Demand SOD: www.iscantech.com/sod/

[@nigthalive]

I was looking for some video like this, step by step-by-step instructions without jumping any step. Today you make me have more motivation for remove the valve body and clean the valves. #722.9 #valve #body #remove #amazing

[@AutolandScientechUSACedarPark]

Thank you!

[@patricwell8335]

I just stumbled upon this. Just got my s430 about to do the tranny

[@AutolandScientechUSACedarPark]

Let us know how it goes.

[@ryannewey2146]

How do you reset the valve body / reset the transmission module after install of the new valve body?

[@AutolandScientechUSACedarPark]

See this video: czcams.com/video/xWbZ00pAXX4/video.html

[@user-ic5hg4tb9u]

I have a p2759 code. I read it could be transmission fluid, a bad electrical connection, or.......please comment thanks

[@AutolandScientechUSACedarPark]

P2759 means that Torque Converter Clutch Pressure Control Solenoid Control Circuit Electrical has been detected.

[@ncfinest9343]

We’re can i buy a conductor plate for a 08 s550 4 matic

[@AutolandScientechUSACedarPark]

Mercedes-Benzs only.

[@escott3829]

You Can Have The Original CP Rebuilt. Circuit Board Medics As Well As Others Will Provide This Service. Thus Saving The Anti-Theft Programming. FCP Euro Sells Complete Rebuilt By Benz, Which Will Need To Be Reprogrammed.