WHAT TO DO WITH YOUR SNOWBLOWER AFTER YOU ARE DONE USING IT
Vložit
- čas přidán 14. 01. 2022
- #snowblower #maintenance #garagegear
WHAT TO DO WITH YOUR SNOWBLOWER AFTER YOU ARE DONE USING IT. Finished SNOWBLOWING your driveway? Before you pull that SNOWBLOWER in the garage there are couple of things YOU MUST DO to help MAKE IT LAST. Watch as I go over some QUICK and EASY steps that you can take with just about any snowblower model to avoid mechanical issues and make it more EFFICIENT! LIKE & SUBSCRIBE!!!
CONTACT INFO:
EMAIL: garagegearjb@gmail.com
INSTAGRAM: garagegearjb
SUPPORT THE CHANNEL or help me take the GARAGE GAL out to dinner!
paypal.me/garagegear?country....
GARAGE GEAR AMAZON STORE
www.amazon.com/shop/garagegear
SNOWBLOWER SCHOOL - RUSTPROOFING COURSE OPTIONS:
1.Amazon Storefront:
See pinned list labeled - SNOWBLOWER SCHOOL RUSTPROOFING
www.amazon.com/shop/garagegea...
2.Etsy:
www.etsy.com/listing/15789027...
3.Email garagegearjb@gmail.com to purchase a PDF file of the Rustproofing Your Snowblower Course. An invoice will be sent to you via email. When you receive the invoice, you will be required to PayPal $9.99 to garagegearjb@gmail.com. Please include your email and name in the comments section. You will receive the PDF in your email within 24 hours after payment is received.
Thank you supporting Garage Gear!
WATCH THESE NEXT:
HOW TO CLEAN, SHINE AND PROTECT AN ARIENS SNOWBLOWER • HOW TO CLEAN, SHINE AN...
HOW TO INSTALL AN HOUR METER ON A SNOWBLOWER FOR BEGINNERS • HOW TO INSTALL AN HOUR...
HOW TO CLEAN A TROY BILT SQUALL 2100 SNOWBLOWER CARBURETOR • HOW TO CLEAN A TROY BI...
HOW TO CHANGE SNOWBLOWER OIL FOR BEGINNERS • HOW TO CHANGE SNOWBLOW...
HOW TO ADJUST A SNOWBLOWER AUGER BELT TO THROW FARTHER • HOW TO ADJUST A SNOWBL...
HOW TO CHANGE SNOWBLOWER AUGER BELTS - FAST & EASY Replacement and Installation • HOW TO CHANGE SNOWBLOW...
ARIENS DELUXE 24 VS TORO POWER MAX 824 - WHICH SNOWBLOWER IS BEST? • ARIENS DELUXE 24 VS TO...
BEFORE YOU BUY A 2 STAGE SNOWBLOWER, WATCH THIS! 3 THINGS TO CONSIDER • BEFORE YOU BUY A 2 STA...
HOW TO CLEAN AN MTD YARD MACHINES CRAFTSMAN TROY BILT SNOWBLOWER CARBURETOR FOR BEGINNERS • HOW TO CLEAN AN MTD YA...
PRODUCT LINKS:
Space Heater (USED IN THIS VIDEO) amzn.to/33b9C5k
Space Heater With Digital Thermostat amzn.to/3JRKLEs
Oscillating Space Heater amzn.to/3HKHGEn
Liquid Wrench Silicone amzn.to/3oOdtxJ
WD-40 amzn.to/3pOYZNk
36" Metal Ruler amzn.to/3F3jLhz
Ariens Snowblower Cover amzn.to/3GaYVym
Standard Snowblower Cover amzn.to/33iIIIV
Ariens Snowblower Mat amzn.to/3CxhsmF
36" x 72" Snowblower Mat amzn.to/30E94nP
Ariens Deluxe 24" Snowblower amzn.to/3qT1Gzq
Ariens Compact 24" amzn.to/3qYrcDp
Ariens Deluxe 28" Snowblower amzn.to/3CMOKO1
Ariens Drift Cutters amzn.to/3sOeRCy
Armor Skids (Ensure fit your model prior to purchase) amzn.to/3q8il1b
JB and Garage Gear do not own the rights to the additional photos and clips used in this video.
Disclaimer:
Due to factors beyond the control of Garage Gear, I cannot guarantee against improper use or unauthorized modifications of this information. Garage Gear assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Garage Gear recommends safe practices when working on machines and or with tools seen or implied in this video. Due to factors beyond the control of Garage Gear, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Garage Gear.
JB from Garage Gear is a member of the Amazon Affiliate Program and may receive a commissions on select purchases. These commissions do not influence the prices you pay on Amazon. Thank You for supporting Garage Gear! - Jak na to + styl
Here is a link to the SPACE HEATER I use! Melt that snow and save your belts! amzn.to/3Kdsz8z
Got it. Thanks.
@@ReyHubbard ROCK ON Ren!
Is that heater tip-proof? I am leary of free standing heaters without safety cutoffs.
There is a new model without a fan, that uses quartz rods and a reflector. It is is floor standing and tip-proof. Its a good alternative. Might take 2 minutes more time to do the directed heating
@@lsatenstein this one won’t fall over it has a wide base.
Another tip…when you snowblow, go out to the street with the machine and open up the end of your driveway first. Blow all of the snow and salt or sand mixture at the road before doing the remainder of your driveway. This helps to clean all of the “contaminants” from the auger housing and impeller as you are blowing out the driveway, keeping your machine cleaner.
Good tip! 👍
Love that tip 👍
I replaced a single stage Cub Cadet (my Barbie snow blower) with a 26” Craftsman (named it Gus) after the snow dump in WNY in November and before the most recent storm rolling in right how. I haven’t used it yet, but I learned what to do before, during, and after use from watching several of your videos. They all had great content with simple tips and great instructions. I’m sure I saved myself some time and repair costs by educating myself with your help, which made me subscribe to be part of the tribe after feeling the vibe.
Hey Melissa! Appreciate your positive feedback!!! I’m sure Gus will work great for you! Thanks for subscribing and go BILLS! Merry Christmas!
Lots of good ideas and thank you for an informative video. A couple of recommendations having lived in Maryland for several decades where we do not get snow on a regular basis. Firstly check your air pressure and your tires and make sure they are as inflated to the recommended level of air pressure. Secondly, I always drain my gas tank and drop the carburetor Bowl to make sure it is completely empty of gas. I perform this task because I don't know when we will get our next snow. I leave the gas cap off and I shove a rag into the filler nozzle of the gas tank because I don't want condensation building up inside. So I would add these items to your next video version. Thanks again for your suggestions they're very helpful and take care.
All good information here Frankie! Thanks for watching and sharing!
Great tips. Can't bank on my tenant to follow these steps at our rental duplex, ( I charge them less than half the going rental rate the entire year for the occasional mowing or snow removal when I'm not there) but I'll be sure to use a couple of these tips on my snowthrower attached to my JD which isn't stored indoors but under a 12' tarp. Gets mighty cold in my area with just as much wet snow that acts like wildlife seeking a nice place to keep out of the wind. Makes a lot of sense to melt the ice & snow crammed into the auger area. I depend on my JD snowthrower since I clear 7 driveways and the bridge walkway to church. I don't take money, it's more a neighborly thing I do. If my thrower is down, a lot of people sure take notice. Thanks
Thanks for sharing J
Good tips. I recently bought a snow blower and when I did, the company selling it to me gave me most of the tips (not the heater for the blades). However in a warm garage, before I put it in the shed, I let it dry out and then put silicon on it as that was also recommended to me by the company. I was wondering if there is anything else I needed to do so I watched. Thank you for your videos, they either confirm I do the right thing or if there is something else I can do.
Thanks Sam! A warm garage works well too! Mine usually stays around 30-45 degrees. The heater really speeds things up! You’re on the right track my friend! Take care of that snowblower and it will take care of you for a long time! Thanks for being a cool fan!
I don't have a heated garage, and keep my snowblower in an unheated shed that has no electricity. I've never had an issue. I thoroughly clean it after every use, and actually use an old plastic gas can under the pan and have the back wheels off the ground to allow water to drain forward. As for the impeller freezing, I've had it happen a couple times in the past when I didn't prop up the blower, and have an old wooden axe handle that I use to check the impeller and give it a couple taps with the wooden handle to free it if ice does form. This step is on my startup routine, same as checking the oil and filling the fuel tank.
The most important thing I do? Maintenance. During the summer I thoroughly clean the blower, oil, grease and wax it. A couple of years ago I touched up the paint in a couple of places, then waxed it again. Any mechanical parts that need repair or replacing get done right away. One friction disk, a dip stick (top popped off), and a few shear bolts. Everything else is original. If I'm not mistaken, my blower is 34 years old, and will likely last another 34 years.
All good tips here Wayne! Thanks a lot for sharing! 👍👍
Clean your auger and impeller with a brush. Once its been clean, start your snowblower again and run the auger a few seconds. It will clear the remaining snow that fell at the bottom and it prevents ice from forming. I had a ariens and now i have a honda. I have never had a single issue doing this method.
Came across your videos while looking for information on snowblower summer storage; (specifically, whether it's OK to let the machine rest on its tires all summer.) Quite informative and useful. Thanks!
After doing my driveway, path to the backyard garage and fence line composter, and the driveways of two of my neighbours, I have neither the energy nor the patience to be quite so diligent about post-use rituals, beyond cleaning out the snow from the scoop, augers & impeller. Post use, I bounce the machine up and down & stand it upright to clear loose snow. Nor do I have a heated garage in which to carry out such precision detailing. What I do do though, is prior to next use, I ensure that the impeller moves freely before starting the machine (Ariens Classic 24+.)
One piece of advice that I recommend is NOT using the bracket for the cleaning tool except for summer storage. I have twice replaced the bracket after breaking it because I reefed on it too hard, discovering too late that the tool had frozen into the bracket, breaking the bracket in the process. Now it hangs from a hook on the back porch railing.
Thanks for sharing what you do Kwazy! Welcome to the channel! 👍
Some good tips on how to clean and store your snowblower. I mentioned in another thread that I purchase store brand canola oil by the gallon and decant it into a spray bottle for keeping the surfaces slick. I also check to make sure no shear pins have been sheared off and replace if necessary. I always keep lots of spare shear pins handy and re-stock them every season. I do like that little space heater and just placed an order for it as I've been using a propane blast heater which is effective but gives off nasty fumes. Thanks for sharing. Cheers from northern Vermont.
Thanks for sharing this with the community flat! 👍
Just another comment to add. I live in Ottawa Canada with a good 5 months of winter. I've happily owned and operated a (only one) snowblower for 40+ years. While Garage Gear guy gives good solid advice, I don't do any of that stuff, except keeping the skid plates on a piece of wood off the concrete (in my garage). I summer-ize by running the gas tank dry at the end of every winter and have my snowblower professionally serviced once every 5 years for a couple hundred bucks. They do oil, lube everything, carb, change snow throwing belt. In my opinion that's all you need! Works for me.
Thanks for sharing
I recommend Maxima SC1. You don’t need to wipe it off. MX riders use it with great success to keep mud from sticking to the bike and under the fenders. Also, more of a start of season prep, but be sure to lube the auger shaft and only use genuine Ariens shear pins only tightened down to just snug as in directions. Also always do a last minute grounds check for branches and old newspapers on the ground before the snow hits.
Thanks for sharing Gnx!
Use manufacturer shear pins only and watch for old rolled up newspapers. Getting that out of your snowblower can be problematic for sure
@@georgelange5272 thanks for sharing
@@georgelange5272Extension cords are REALLY fun! Before I clear neighbour’s driveways, I always ‘kick’ through the snow to find buried cords.
I own a 2010 areins 28 pro, never kept it in a heated garage, never used a space heater. End of every season I chang the oil and spray the whole machine down with atf fluid for linkage lube and rust prevention, also grease the shaft zerks. What a machine they build, I've used it to clear my old jobs parking lot before, always hit the neighbors houses as well. Heated garage in my dreams but I do have the ariens cover.
They build em well don’t they! Thanks for watching carpenter!
I have a Cub Cadet Trac machine I bought new in 1976 . Before putting away between snow storms I brush off outside of blower around chute. I also clear out snow inside auger housing. Having an attached garage I place blower inside for it to dry off.👍 🎉You have good tips lifting blower off concrete to alleviate rust concerns. 👍 I also spray down chute and auger with (PAM )to keep snow from sticking👍
Thanks for the feedback! Thanks for sharing! That’s awesome!
We take the “stick it back into the garage and let it melt out on its own” approach, as well as the “leave it in the shed having done no maintenance all summer” one with our 25 year old Toro two stroke single stage. I’m not saying it’s the right way to do it or even that it’s a good idea, but the thing still starts on the second pull, and I changed the paddles and scraper for the first time last winter. They don’t make them like they used to. It generally comes out in October and goes back in May in this bit of Canada.
Awesome that your machine is still rockin! Thanks for sharing Malcolm!
My first time watching Garage Gear. I loved the tips and will definitely apply them next time I go out with my snowblower. Thank you !
ROCK ON Steven! Make that machine last my friend! Thanks for watching!
Excellent !! I do everything up to the 2x4's, but never thought of the space heater or spray. I got the Ariens 30 Platinum SHO after we had 2 big winters. We share a 4 house drive way and the guy that had a blower moved so I bought one. I've used it 3 times in 4 years. LOL But it's great when I do use it and tips like this are perfect for my situation. Thank you !!
Hey Mur! Follow these tips and your snowblower will most definitely last! Take care of it and it will take care of you! 👍
Have the Ariens 28 SHO Deluxe. I use a car windshield scraper brush to get most of the snow out of the auger and impeller after shutdown. I did this after throwing ice out of the chute after startup when the snow melted and froze. Didn't break a belt but the ice slammed into the side of the garage. If the augers seem dangerous after shutdown you can always remove the start key- can't run without the key. As far as fuel goes there are several gas stations in town that sell ethanol free premium fuel. I use a 5 gallon gas can for the lawn mower and snowblower and add stabil before fill up at the gas station. Ariens makes a very good snowblower.
Thanks for sharing your methods here Watae! 👍
Thanks for the well made video.
I have a 31 year old Honda 2 stage 24 inch since new.
Live in NJ
It lives in a heated garage and sits on a rubber mat.
Ive changed the drive belt and auger belt once.
Ive replace the tires due to age and cracking once.
I learned the hard way to never leave gasoline in the carburetor so when Im finished I put it to idle to cool and then turn the fuel supply off. When the carburetor is out of fuel the engine stalls.
The first year I had it gasoline in the carburetor went bad and I had to buy a new carburetor and on Honda thats not cheap.
Before putting it in the garage after use, I get a bucket of hot water and throw it in the shute and auger. I do this over the nearest storm drain. All the snow gone and back in the garage it goes.
Personally I steer clear of WD 40 on my snowblower. WD 40 contains a Vaseline material that in the long term attracts and holds dust and dirt.
Short term its okay but Id never store anything covered in WD 40.
Lastly if garage keep the snow blower will last a long time, if you change the oil yearly, make sure it has fresh fuel, clean / change the air filter an check / change the $2.00 spark plug.
I bought my Honda in 1991 and the salesman told me , its the last snowblower youll ever buy if you take care of it. You know I think he may be right.
That Honda will last forever if you take care of it! Sounds like you’re on it! Keep it up my friend!
That's awesome! I have a new snowblower and i intent to keep it that way. It's funny but i do exactly the same thing every time, i don't mind at all. I also like to give it a quick air spray using the air compressor to flush out the water in places where hands can't reach. Super awesome video. Keep up the good work brother 👍👍
Thanks a lot for the positive feedback MP! Great minds think alike! Thanks for being a cool fan!👍
Thank you so much!!! Recently single female who "splurged" on a snow blower. I was worried about the investment since, you know, now a days, things don't last long like they used to!!! Love your video! Gave peace of mind that it will outlast me! Now, need to find "winterizing snow blower" and "how to use a Riding Mower". Another splurge, and it sits- 3 months. Still pushing a mower on 1/2 acre at 63 yrs old. I"m a "visual learner" (show me), so the instruction book is confusing. Sigh...
Hey Tjsinpa, glad you found this video helpful! I am proud of you for mowing your 1/2 acre lawn with a push mower! That is an accomplishment no doubt about it! Here is a link to storing your snowblower in the summer if that is what you are referring to. HOW TO SUMMERIZE A SNOWBLOWER FOR BEGINNERS
czcams.com/video/9Gtl1lNC8tI/video.html
I do not do much with riding mowers but can tell you that the procedures aren’t far off from other equipment. Thanks for watching! 👍
I just bought an Ariens about two years ago, compared to my last machine (Snapper, 2001) which died in 2021, it's like going from a Chevy to a Cadillac, love the way it performs, best money ever spent. I do regular Oil changes, plug changes and drain fuel at the end of the use season. It is stowed in a dry ,clean storage shed during the summer. I don't run a heater in the garage to get rid of Chute and Auger snow accumulation, I let the engine cool down for few minutes running, then, in the driveway I use a pump sprayer with hot tap water to wash down the areas, after a short dry time it is put in the garage, Have no problems doing this.
Like you procedures here J! Thanks for sharing!
Great video, thanks for putting this up! I do all of the steps you mentioned, however, I never thought of the wooden blocks, the space heater and the spraying of the lubricant as you showed us here. Excellent tips and I will definitely be adding those steps at the end of every use. Subscribed as well! Thanks, again!
ROCK ON Michael!!! Take care of your snowblower and it will take care of you! Thanks for subscribing! 👍
@@GarageGear very well said! Love my snowblower and it will love me back!
I’ve got a 22 year old Ariens 1028. It handles a 110 ft, double width driveway and a 150 ft winding path quite handily, here in the always snowy Ottawa Valley. Common sense tips, such as the ones in this video, and yearly maintenance, have kept the beast in good shape.
Thanks for sharing Rich!!!👍
Wow, what irony. I just picked up a 927LE Ariens in Carleton Place yesterday and I’m having a blast with it in Hudson QC2 long driveways are handled easily with the great 2008 machine.
@@Hot80s I have an Ariens also, I think it is a 732. It's older but I love it in WNY! Her name is Ashley.
@@Hot80sThat's not irony, that's a coincidence.
Here in Alaska we get our fair share of snow. I always throttle down and let the snowblower idle for a couple of minutes before shutting it off, brush the big spots of snow off, then park it outside behind my garage and place a deep-sided plastic sled upside down on top of the snowblower to keep most of the weather off. Stays outside year round. It’s pry 10-12 years old, no visible rust, and fires right up when needed. Only takes a couple of minutes to put it away.
Thanks for sharing david
My complements on a useful video. I have a 28" Ariens. One thing I have been doing is turning the ignition off to shut down the machine for refilling the gas tank or when finished. Per your suggestion, will throttle down for a cool off. Mid season, when the temps get above freezing, will spray the auger, housing, and chute with a Lanolin based product-Fluid Film. Not unusual to get snow in April in Lawrence Park, (Erie) PA. Also, appreciate reading the comments from others. Take care.
Thanks for the positive feedback Conrad! Thanks for watching! 👍
Hello JB. Do you live in the Buffalo area? We have relatives in South Buffalo and West Seneca, just curious. Will be checking out more of your videos.
Great video! I always prop mine up on wood blocks too in the heated garage. Taking care of your snowblower sure does make it work like new year after year!
Great tip my friend! Take care of your machine and it takes care of you! Thanks for watching lawn lover!
My 35 yr.old 29" Craftsman is till going strong . Thanks for the heater idea , I have been cleaning it thoroughly using car wash brushes & using a small stick in the center to elevate the bottom from the cold cement floor . There is no drain hole to drain the housing ,so I tip the blower forward enough to allow any water left to run out and dry with a paper towel . I have a 2 speed Mr. Furnace heater . How about leaving a work light with a 100W bulb inside the housing all night ?
@@smerchly haha that will heat things up too! Thanks for sharing smerchly!
I run a Troybuilt. 25 + years. I tip the blower FORWARD also to have the water run out the front and not pool in the chute impeller area. Here in eastern PA we have mostly ‘sticky’ snow which makes blowing tough. I will try the WD40 trick you mentioned to help keep the exit chute clear especially.
Very helpful tips, J.B. I own the same Ariens snowblower and I am certainly guilty of just turning off the machine when I'm done with my driveway. I definitley have those rustmarks on my garage floor. I will try the space heater and WD-40 spray trick.
Give ‘em a go Chris! Thanks for watching! 👍
i have an older version of that Ariens snowblower 2004 model and the storing on a rubber mat it key to leaving marks on the floor...i don't go to extreme of heater or spraying after use but I use the spray at the beginning of season and right before I store for summer.....indoors all year round is key to long life and my machine is 18 yrs old and still looks brand new...Syracuse here, so we know our snow...120 inches a year!!!
Oh yeah Brian! 120 inches- you guys ain’t messing around! Proper storage is key to long life! Thanks for sharing my friend! 👍
I have a snowblower almost the same model as yours, while I use a spray lube at the rotating points on the auger and shoot I no longer use silicone on the shoot or in the auger housing. Silicone and WD40 or lubes of this nature get thick and hold snow and moisture at when cold temperatures. Take a cloth with mineral sprites and wipe all the surfaces clean, this includes the auger. Get a bottle of spray hybrid ceramic car coating, there are a number available. They dry hard - resist moisture and snow buildup up. Also recommend spraying your snow shovel, works there also.
Great tip with the hybrid ceramic coating! I’ll look into that! Thanks for sharing!
Great advice on the heater. I have a detached garage and usually always clean the snow off- except the other day. Yesterday the ice in the impeller prevented operation. Have a Toro which has a clutch disc instead of belt. I used de-icer solution which cleared it in about 10 minutes.
Not a bad solution to that problem. Thanks for sharing!
Another A+ video! All excellent tips. And I know exactly what you mean about impellers freezing. I used to do a lot of repair work on the side and that was a common issue in the middle of winter. Belts certainly do not like a frozen impeller lol.
Thanks for the positive feedback Smallblock!! I’ve seen it happen too many times so I had to mention it. Thanks as always for being a cool fan!
Always spin that impeller by hand first to make sure it's free. Then start the engine. Since most snowblowers have a brake on the impeller drive, have someone hold the lever down for you, or quickly wrap it with a bungee cord.
I clean mine completely. Even inside the auger.
I store it outside (no shed or garage) and dont want it to be ice and possibly break something.
While i clean it (with a car brush) its usually fully cooled down. I put a snowblower cover on it and then a tarp on it for even more water protection.
I also spray with p100 spray since it uses wire to pull stuff around like the shoot.
It would freeze and jam when really cold but since spray everything with the p100(like wd40 but rated for very cold temps. -40c) its been great. No more wire freezing.
Mine also has electric start but its in a square thingy and my extension cord tip wouldn't fit in it so i use only the pull start. Starts on the first pull every time. Even in a week of -20c -30c it'll start on the first pull without having to do anything special.
(My snowblower is a yardworks)
Thanks for sharing Weasel!
I learned a lesson the hard way a couple of years ago. I bought a used snow blower that was just a hand pull start. While trying to start it cold I torn a tendon in my shoulder. After alittle thinking I realize my error, trying to start it when the oil was cold.
Ever since that day I have placed a hair dryer next to the crank case for 15 mins
to harm up oil before starting.
I have recently bought an electric start and will be doing the same with it.
Good thinking Darrell! Thanks for that tip! 👍
Never put Ethanol gas in it. Alcohol free 91octane is the only way to go.
Ethanol free is the way to be! Thanks for watching!
I really appreciate the maintenance tips. I ordered belts and a friction disc, yesterday after I realized my machine is 8 years old. Time flies!!
Crazy how fast these things age Tom! Good idea to look things over! Better to be proactive! Thanks for being a cool fan!
I agree with the throttle down and brushing of as much snow as you can. But the heater and the rest??? I live in Western NY and I have a 20 year old 11hp John Deer and an unattached garage that's at outside air temp and it runs just as good as it did 20 years ago. I also turn the fuel shutoff off and run the carb empty at a low rpm after every operation. I also empty the tank at the end of every season before storage. Ironically I got a 3 year old Cub Cadet from my son this summer and it failed to start and is now in for service. To remove the 2ft off snow this week I had to rely on the 20yr old John Deer :)
A fellow WNY’er! Awesome my friend! Glad your machine is still rocking! 👍
@@GarageGear Nice to know that your from the area! I forgot to mention that I use Mobil 1 for oil. It flows easy when cold, makes starting a lot easer.
@@JimB531 that’s good oil to use for sure! Let’s go BUFFALO!!!
I don't spray mine but I do knock the excess snow off, and I keep the base on an old yardstick I got from the State Fair to keep my floor from getting stained up. I also have a bit of a pitch to the floor so I am angled enough that when the snow melts, the water travels away from the blower. I think I've had it around 12 years now and other than the year I left cheap gas in it and gummed up the carb, it runs and works great. I run premium in it now and let the tank run down towards the end of the season, and dump some seafoam in it. Every fall its 2 pulls to start it or I plug it in and just tickle the starter
Thanks for sharing larommi!
Great tips. Definitely agree with the cool down for the engine. I had always been told to run fan-cooled air-cooled engines, like those found on power equipment like mowers and blowers, on high rpm before shutting down. The concept is to keep the fan spinning fast and moving more air than it would at idle. That may be more important on a mower in warm temps rather than a snow blower in cold temps. Regardless, keeping that fan spinning to cool an engine after it has finished working hard is a great tip. Thanks.
Thanks for sharing this Keith! 👍
Manufacturers recommend running an engine at full throttle because they run cooler. The flywheels have fins on them that move air. Idle RPM move less air, and restrict cooling. You will see sheet metal wrapped around the cooling fins to assist the air movement around the head. Bottom line, you want a cooler engine, run at full throttle as per manufacturers guidelines.
@@johnfromnj885 thanks for sharing!
That's an urban myth. You'll never find any manufacturer saying that in writing, because it's simply not true. We've all met the guy who runs his chainsaw full tilt all the time; his chainsaw doesn't last long. With experience you learn just how much throttle to give it, and that's the sign of a veteran. Anyways, if you're concerned about limiting engine temperature don't work it so hard.
Thanks for the tips. I just replaced a seven year old underpowered blower that didn’t quite make five years (the last two years presented a host of problems) as I do six to seven neighbor’s drives. These tips will definitely make a difference. Thanks again!
You got it Reese! Keep that machine going! Thanks for watching! 👍
My Ariens needed a spark plug in its 5th winter. Otherwise it was a brute to start manually. I almost always use the electric starter but sometimes I might want to shut it off in a neighbors driveway.
This winter it was very colder than normal, about 10 degrees at night. When snow hit I pulled out my snow blower that had been stored outside. I got it started but the auger was jammed. I put the snow blower in the garage and warmed it up. Still jammed. I tapped on the transfer box with a hammer a bit. That loosened it up and all was good. My guess is the oil/grease in the transfer box was too thick and when the motor tried to turn the spindle it jammed. Warming it up and tapping on the housing loosened it up. So moving forward I'll move my snow blower to the garage sooner before it gets too cold.
Got it! Glad you located the issue! Thanks for watching don!
I live in Canada where its -30 for a good chunk of winter. Ive got a 20 year old craftsman, 9HP tecumseh, Ive MAYBE changed the oil once in its life. Never clean it off. Never drain the fuel, just add seafoam in summer.
Starts first pull (if I leave it in my garage, which is rare unless there's multiple days of huge snowfall or drifts) or if I keep it in my shed and use the electric start it fires right up.
I'm the definition of driving it hard and putting it away wet and the thing is still in great shape.
Awesome my friend! Glad it keeps on ticking for you!
Great job and always enthusiastic the way you explain things. I will follow exactly as you say so I can last my snowblower long. Keep up the great work man!
Give these tips a shot and your snowblower will last a long time my friend! Thanks for being an awesome fan Zahed!
@@GarageGear np and will do
I do all that you recommend except for two things:
I don't let the engine cool down for 30 seconds on low throttle but will do so from now on.
Second, i try to brush all of the snow from the auger but will try the small heater in front.
Great tips, thanks!
Melt that snow my friend! No belt issues that way guaranteed! Thanks for being a cool fan of the channel!
A major US highway exists at the end of my drive. The state graces me with 3-5 lanes of wet, heavy, salt laden snow all winter long. Salt eats snowblowers. So I do all that you mention in this video plus spraying warm, clean water on the snowblower after it has had all the snow removed. I don't use an electric heater, I use a tin can alcohol radiant heater.
Thanks for sharing Lee!
Super awesome video! I didn’t get around to catching this one but just seen your note on the 1M views! So had to make sure I got over there for ya to check out! We had a pretty good snow fall last week up here in central NB about 8-12” of wind packed snow throughout the driveway, an definitely more at the road… let’s just say I was using a great portion to all of the 11hp the olde flat head Briggs was offering that evening! Boy was that ever a fun time and it was running like a top! Andrew from NB, Canada :)
Awesome Andrew! Sounds like you had some fun! 👍👍 as always thanks for the positive feedback!
To prevent any melting snow from collecting, I pour warm water on the blower housing (keeping away from the engine). This removes 100% of all snow, leaving only “drips” to evaporate. Then, I place blocks under the wheels, not the blower housing … I think this works better as water wants to collect around the 2nd stage impeller. The blocks under the wheels makes any water here drain out the front of the unit.
Good tip! Thanks for sharing!
Good suggestions. Every spring, before putting it away for the warm weather, I change the oil, run the gas tank dry and empty a can of WD40 (or similar spray) on the whole body. Original paint still on the blower after 32 years. I kid you not. Only 2 spark plugs in 32 years. ...and starts with fresh gas 1st or 2nd pull.
Awesome tips John! Thanks for sharing!
Simple steps that you can do that will make your snowblower outlast you!
@@adriantomlin2902 take care of it and it takes care of you! 👍
Hey John, I usually change my oil around Oct,I never have drained the gas tank usually put some stabilizer in it
Started investing in TruFuel for my lawn equipment and have been pleasantly surprised that I don’t have to run them dry at the end of the season and they always start up on the first or second pull the following season.
hey Garage Gear - good stuff - I live in Lancaster and you do our city proud. I found your content because my Ariens was cutting through the heavy snow from Sunday night and I began to hear a bit of squeaking from under the belt housing. I think because I dug thru snow that "submerged" the entirety of the engine and everything it caused the blower not to eject snow its normal distance. Maybe the tension belts were slipping so will work again when they dry out nevertheless using your videos to trouble shoot. Nice work!
Ha nice my friend I’m in Lancaster too! Small world huh? Let me know how your troubleshooting goes and if I can help. And yes Allen is a god! ROCK ON my friend! Go bills!
Town of Tonawanda here! I’ve been watching the videos for a while (done a few myself). I always like to hear about those tips and tricks.
Let’s go Buffalo!
@@greenhorntenderfoot9261 awesome! Very cool! The city of good neighbors is taking over CZcams! Do you have e a channel greenhorn?
@@greenhorntenderfoot9261 so you do lol! Cool I’ll have to watch your videos! Thanks for sharing!
I love the coating with a protectant! I use WD40 and spray everything down before and after use! It helps prevent clogs and then rust afterwards. I just upgraded to a bigger blower and sold my older Toro. It was 15 years old and looked almost like new. Even the guy who bought it couldn’t believe the age of it.
By the way I love the mat under yours. Where did you find it?
Thanks for the great videos and tips! Love ❤ the channel! ⭐️⭐️⭐️⭐️⭐️
Hey John! Here is a link to the mat! Thanks for watching amzn.to/482vegq
Good tips! I prop my Ariens Deluxe 30" up on a piece of wood. My garage never gets too cold. But I'll lubricate it now for sure. I let it run dry after every season. And I only use premium gas! It runs so much better
Thanks for sharing Jim!
Great tips. One variation on the heat theme; I have, in the past, used a magnetic 120V block heater and attached it to the bottom of the belt drive housing to melt the snow/ice buildup.
Great idea Martin! Thanks for sharing! 👍
I have found that if I clear a spot of snow (outside the garage) bring the blower out, warm up the motor and let all the steel (the auger, shoot etc) cool down, the snow doesn't tend to stick to everything. Much easier cleanup when I am done. Plus, I am "Thee King of the Dunces, Lord of the Idiots" and I already was practicing what the video demonstrated. So it made me feel good! LOL
Awesome you’re a wise man Bruce! Thanks for watching!
No longer own my snowblower since I moved to Texas but I was the guy who always did all of the neighbor's homes when I did own my "Mean Machine".
Great tips but I would add 1 more item, when I was done using my machine for the season I would take it out and run it dry. While I was doing that I would add some STA-BIL to the little gas that was left so that no matter what was left in the tank it wouldn't gum up the carb. Also I pitched my machine a few degrees by putting a brick under one wheel so that the gas would all drain into the carb while I was running it dry.
Never had a problem starting my snow blower in the 10 years I owned it.
Great tips my friend! How’s the weather in Texas nowadays? Miss the snow?
@@GarageGear It's funny for what passes for snow here.
They're just not prepared for it so when they get an inch or two schools close and people are in a panic.
@@davidp419 and it’s probably all melted the very next day. 😂
I've been doing this on my 20 year old Honda 724 since new. Using 'straight' gas instead of the readily available ethanol- infested stuff helps tremendously too. No gummed up carb and fowled plugs every year!
Thanks for sharing the tip!
Newly single mom of 3 kids here in Colorado, and was given a used snow thrower 2 days ago. I'm a nurse so this mechanical stuff is not my wheelhouse. HOWEVER, I know I can do this maintenance because of your GREAT video! Yesterday I bought a rubber mat and silicone spray. I am ready for the foot of snow forecast for tomorrow. Thank you!
Hey I loves! Sounds like you are ready to go! If you ever have any questions feel free to reach out! Happy snowblowing! Thanks for watching!
Don't worry about your "Mechanical" skills, I'm an Accountant, I can cut myself with a screwdriver...🤣
Don't worry, those machine, no matther the brand, are nearly Bomb Proof... You'll see, you'll have soooo much fun throwing snow 10 feet in the air... :)
Don't use silicone spray. Silicone spray's purpose is to lubricate while ensuring you don't break down any rubber or plastic. There aren't any rubber or plastic components inside a blower. A petroleum based product will help shed moisture and will perform much better. I personally use Krown corrosion protection but WD40 as described in the video is a great product too.
@@SuzukiKid400 thanks for sharing
I've got a 1983 Noma Canadiana 28" 8hp, it's a beast at what feels like 200 lbs, I change the oil and clean the plug and paint over any rust, that's about all I ever do, it's stored in the summer and covered with a rubberized Bell telephone tarp in the backyard from the 80s also lol. Always runs, my newer one a 2009 White is a princess compared to the old orange Humvee. Moral of the story? 80s rule!
Thanks for sharing my friend! Old stuff is the best stuff!
After use I blow clean salt-free snow and then I always cool down the engine at idle, brush off the snow from the deck, housing and chute. Then I put the throttle up to 3/4 and engage the impellor to clear the snow and water from the impellor housing. Then I idle the engine and back the blower into my unheated garage. It is stored on a rubber mat. The instructions from Ariens say before starting to engage the blower clutch and pull the pull start cord to make sure the impellor is not frozen in place. Only If OK, then choke, throttle and prime before starting the engine. Once in twenty years I have had a frozen impellor. It was a pain to get free as the temp was below zero at the time.
Thanks for sharing Walter!
I already do most of what you recommend except for the space heater. I brush my SB off while it is cooling down at idle on the side of my garage. Then I splash a bucket of water into the auger to melt the snow, then bring it into my garage. It`s a heated garage so once it`s dry I spray the auger parts with silicone.
All good tips here Peter! Thanks for sharing! 👍
That's the way to do it, Pete!
I have done everything you’ve done once I saw the rust marks in my garage floor except the silicone spray at the end. Thanks for the advice. Since I lost my husband and am a widow I have to learn all the shortcuts on making my equipment last as long as possible. Great video 👍
Hey Karen, first of all let me say that I am sorry for your loss. Second, I give you a lot of credit tackling this head on. I have plenty of content here to help you out. If you ever have a question or problem come up just let me know. Thanks for being a cool fan of the channel!
@@GarageGear thank you.
Hi Karen, sorry to hear about your husband. You are an inspiration. Quick tip re 300 lb. plus snow blower use. Go slow, let the machine do the work, learn efficient snow clearing patterns (path), avoid pulling/pushing/forcing machines direction. Use ear and eye protection, and dress appropriately, stay hydrated, and be sure to take breaks when needed. Slow, steady, safe.
🙏❤😉👍
May God give you strength
@@karenmckillip8685 Hang in there Karen, you will make it girl, take care.
Just changed out my dad's Arien belts on his new (less than 6 clearings old) blower from seized auger due to icing. If you hold auger engagement and pull start handle before trying to start it will pull if clear and not if iced up. 58 bucks for 2 belts and the hassle of changing them is a lesson learned for him and he's a veteran of many years clearing snow with blowers...guess it was just luck that it hasn't gotten him before. I told him to put an incandescent bulb in there to heat it up, but that little heater for 30 or on a timer would do a better job and he has one so I'll pass it on. Thanks!
Lesson learned my friend, Right?
@@GarageGear yeah, a cheap one for me, not so much my dad. I had contemplated putting heat on my blower after I was having some shuddering this last snow fall which I attributed to the excess of ice between the impeller and housing. I put the torpedo heater on it though and melted it. Mine was still turning, but knew it was causing the problem. It probably would have done the same to mine had I not taken the time to melt it down that day.
@@13612 thanks for sharing this
Still using my 1987 Snapper Snow Blower. I have done all these step from day one. My owners manual tells you to put the engine speed down to an idle when you are done and all the engine to cool down. While it is cooling down I clear the snow off, keeping it running also helps to melt excess snow. I have also used car wax on as much of the unit as safely possible avoiding getting too close the the blades which can require a trip to the ER (ask me how I know) .
Not sure if I want to ask! Lol Thanks for sharing your procedures here!
@@GarageGear Four stitches later and a visit to the ER, them blades are razor sharp ;-)
@@bobwendoloski6970 was this recently?
@@GarageGear No many years ago when I was young and dumb
@@bobwendoloski6970 you and adventurous you mean?
Great tips. Never thought of lowering the motor speed b4 shut down or spray coating the snowblower interior and snow chute. Thanks again and just now subscribed.
Thanks Jeffrey! These tips will go a long way to making your snowblower last! Thanks for subscribing! I’ll t let you down! 👍
Jeffery,
Not dropping the RPM down to idle nor using a lubricating coating ? !
Surely you jest !
"No. And don't call me Shirley !"
In a non-heated shed, after removing snow, running the auger and stopping the engine,I lift the rear wheels and put a 4x4 under them so the water clears the auger and the pull cord mechanism. I select a foward speed so if condensation freezes on the hex shaft, It will free up moving forward. I also move the throttle all the way up in case it freezes closed. also a good idea to have a tarp and some plywood with a strong heater in case something does freeze.
All good tips here toaster! Thanks for sharing! 👍
Hi From Snowy Canada. Good tips, in particular cleaning out the snow blower to avoid broken belts when trying to start a frozen auger. (Don't ask me how I know) I don't like the idea of using a space heater, if only because my unheated garage would take forever to heat and melt the snow in the machine. So what I do is to use a very large toilet bowl cleaning brush to remove the snow from the auger and blades and once done I have a spray bottle filled with windshield whipper solution (good to -40) and I then spray all the areas I cannot reach. When next time I need to run the blower, the snow it gone.
Thanks for sharing and watching
I have never had a 2 stage but I have a Simplicity single stage for around 10 years. After I'm done snow blowing that thing goes into the unheated garage and I go inside drink a beer or 2. This is the first year I changed the oil in it. First year I changed the paddles, scraper bar and drive belt. End of winter storage stabil only with non ethanol gas and never run the carb dry. It should have blown up years ago but runs like new still.
Thanks for sharing Delbert!
Thank you for this video. Since hubby died I've had to learn how to snow blow. I'm getting good at operating it. Your advice on how to care for it between uses has been valuable to me.
hey crazy4truth! Sorry for your loss. It means a lot to me knowing that these videos are helping you out! Thank you for being a cool fan!
A smart thing to do, especially for those blowers that may see limited use each year, is to turn off the fuel valve and run the carb out of gas after each use.
I usually run it out in February or March as winter winds down. Thanks for watching!
i do this every time, you never know when it will be the last use for the season
I was going to post this, more than any of the other tips, do this. You never know when the last use will be its last, so, let the carb run dry. Also, use ethanol free gas.
Run the gas tank dry. That way you don't leave gas in it to go stale and turn to varnish. Then next winter you start with fresh fuel.
@@GarageGear can you make a video on how to do this?
I use a kids plastic sled to put the front into to melt down the snow in the auger area. Then just dump it. Its a lot easier than a mat and it will never run over. And use an old comforter over the
chute covering the auger-impeller area with a timer on the heater works a lot faster that the heat just escaping. I have the same snowblower for 22 years now. Never had a repair past sheer pins.
These are awesome ideas Ted! Thank you for sharing these! 👍👍
@@GarageGear If I could offer another suggestion, install the rubber pieces on the impeller that remove the space between the auger and housing. There are many kits on Amazon. Your snow blower will throw 50%
farther and you can also walk right through the slush at the end of the driveway. I do my neighbors aprons as here they use a lot of salt and plow 3 times with each snow. Most annoying. Thanks for sharing to help others maintain equipment.
My first time here due to the YT algorithm. Being a female that just can't handling the snow shoveling much anymore I bought a battery op snowblower. I knew I had no garage or shed to put it in but I just couldn't face another year shoveling after pulling a muscle in my neck digging in my garden last fall. I bring in my batteries & let them cool down before charging them again, wipe off the machine the best I can. I have no electric outlet to use a heater. I have a tent I keep my machine in and use an old home made Styrofoam a/c cover that covers part of the front and a large 55 gallon contractor's bag with bungee cord to cover the rest of it. I have some 2 x 4 pieces I can put under the wheels. Not much else I can think of doing since my resources are limited. Not sure what I'll do if the snowblower doesn't last. I can't pull the cord on lawnmowers, etc anymore and that's why I have battery operated machines. Do they make an insulated blanket I could put over it? They want a fortune to plow and you're left with hand shoveling the sidewalks anyway. Interesting video to see just how lacking I am. I know one thing...it's not fun getting older. I can't afford to move south and I'm sure they have issues with the weather too.
Hey Nature luvr! Sounds like you’re on the right track covering it the best way you can. You try moving blankets too. They are super thick and insulated. I know they sell them at harbor freight and maybe Home Depot. Uhaul centers sell them too. You can even order them online. Here is a link to one. amzn.to/3H7pk0c thanks for checking out the channel!
@@GarageGear Thanks so much. I'm going to get the blanket and put it on before the contractor's bag.
For those that are concerned about using silicone or WD-40 and throwing snow that maybe contaminated, you can use a PAM spray which works just as well and biodegradable
Thanks for sharing!
Agreed! Pan is cheaper and safe for pets and water table.
@@Kingnome thanks for watching
@@GarageGear Give a shot and make a video about it!
@@davidspoelstra8527 I’ll see what I can do!
My heated garage takes care of the melting and I use a leaf blower and/or compressed air to dry it off. I also generously spray PAM on all the snow contact areas which has greatly reduced clogging especially with wetter/heavier snow.
I would love to have a fully heated garage! Thanks for watching!
I just a had a failure. It was the first of it's kind. My snow blower is stored outside with a heavy cover. In this last storm the cover was partly blown off. After starting, when I tried to move, nothing happened. The auger engaged fine. On closer examination, the snow was blown into the drive section of the unit and formed a sheet of ice on the drive plate! No friction, no go! A few minutes with my heat gun fixed the issue.
When I covered it this time, I put 2 extra spring clamps in addition to the two bungee cords that I use to hold the cover on.
Thanks for sharing!
1) For those in Northern climates (that have un-heated garages), it won't thaw. This is "foreigh" to those in climates below Parallel 35 ... but above 45, garages newer thaw all winter (unless heated). 2) I turn the fuel valve off as I'm going to park it. This takes the weight of fuel off of the carb pin. 3) I use a mirror - to *see* that the auger is moving. I put it into gear in waves - like a clutch. Great video, though.
Thanks for sharing Santa Claus!
Good tip with the space heater. Protective spray is great too. I use Crown Rust control on my Yamaha
That’s great stuff! It’s creeps well into spots! Awesome my friend! Thanks for sharing George!
Krown is the best product on the market.
I am about to purchase my first snowblower so this was super helpful, Thanks!
Awesome Mark! You’re all set to go! Thanks for watching!
We just moved from North Carolina up to The farthest north edges of Maine. Mind you When I klicked Play on the video I didn't know the difference betwixt doodley squat & Snow Blowers but after I got to the end of the video I feel Like I thoroughly got started Learning about them from the Prologue & introduction on towards atleast Chapter 3 of the Snowblower Bible
Hahaha we could do a whole bunch of videos and call them segments of the snowblower Bible lol! Big move for you my friend! Lots to learn on these machine. Amazing what they can do! Thanks for watching!
My Toro Power Shift 1132 from 1993 has served me well for the past 29 years. I changed a pulley once and the oil every year or two. Nothing else! Still has the original spark plug. Worked perfectly until last year when I started to have issues with the Power Shift (lever, gate, latches). The other day, the transmission grenaded
The machine was blown off with compressed air after every use, and then stored in the garage. I've never sprayed anything on it and it is still 99.9% rust free. Decided on a new machine (Ariens Pro 28 Hydro). Now I have to figure out how to dispose of the Toro. For about $400 I could get a replacement transmission, but after 29 years, who doesn't want a new machine?!?!
Wow $400 holy smokes! Thanks for sharing andy!
Find a non running one for the parts.
I wish I knew this stuff years ago but better late than never! Thank you for the straightforward lessons and helpful visuals! The snowpile at the end of the driveway is the worst!
Those plow piles are insane! Appreciate the positive feedback Avalon! Thanks for being a cool fan my friend!
I always turn off the gas line (instead of switching it off immeditately), slowly lets the engine use up all the gas from tank to cylinder. Throughout the 30 minutes I am generally using my snow blower, I gradually turn down the choke settings as the engine heats up through use. Good tips!
Another good tip here! I actually start doing that when I get closer to the end of the season. Just because I never really know when my last snowblow of the season will be. Thanks for watching Andrew!
I also do this on my tractor. It's a great habit to get into
Mine doesn't have a fuel line shit off and doesn't run without the choke on😔
@@NickVetter giving your carb a quick cleaning may solve your choke issue. Thanks for watching!
@Garage Gear I have a troybuilt where I have to take apart half the snow blower so I'm saving it untill summer
I was about to mention the wood blocks, then I was like, "ah, there they are". I don't like the idea of cooking the gearbox seals with a heater, but it may not be a problem, especially if you monitor it.
I buy the Ariens "Deluxe Clean Out Tool" because it has a brush built in and that is what I use to brush the unit off.
And, recommended or not, I brush off the inside of the blower and then run it before putting it away. Then again, I grew up on a farm, so perhaps my risk tolerance is higher than many modern men.
Same with the impeller freezing problem. You'll see many modern machines have large impeller gaps, I've seen 3/4", this makes it very hard for the impeller to freeze.
I did have an old machine with an 1/8" gap, and even running the machine after use wasn't enough to guarantee it wouldn't freeze. It got to the point I would manually move the impeller before starting to make sure it wasn't frozen.
Again, kids, don't try what I do at home. That's just what I did.
Thanks for sharing I337! And thanks for mentioning the clean out tool! 👍
Great advice. I usually brush off my blower at well but never thought about the heater (which I have) and placing on a mat and elevating it.
My issue is I lost the wing nut and bolt to the top portion of the chute that raises & lowers. I’ve replaced with bolts but keep losing due to vibration. What do I use to prevent that and still be able to operate the directional chute without tightening the bolt.
Thanks in advance
Hey John have you tried a lock nut? You can place it to a certain tightness and then you should still be able to adjust it without an issue. Let me know if you tried one.
Unfortunately my blower doesn't have a throttle lever but that's still a good idea. Definitely like the heater and WD 40 ideas also.
The heater is a big help melting the snow away and spraying down the machine helps prevent all that clogging! Give it a shot. You won’t be disappointed! 👍
My favorite tip from this one is the cool down. Im gonna do this with my rider from now on. Thanks!
It’s a nice way to ease it back down. I do it with just about every engine if possible. I know I can hear the engine saying, “thanks” lol
@@GarageGear 😂😂😂
The tips are good overall, but this one is a miss. Air-cooled engines don’t typically need a cooldown, as there is no coolant to keep circulating with an idling engine.
If it was run hard in the past couple minutes, you’re better off letting it run full speed with no load for a minute before shutting it off, as the fan also slows down with the engine.
@@jeffscott1543 thanks for sharing Jeff! Appreciate it!
czcams.com/video/orqoU-xbC_0/video.html
I know it is not a lot of lube but I dont like the idea of throwing WD40 around my yard. yeah yeah I know... my vehicles leak more than throwing some snow thru the chute... but every little bit counts. I thought of cooking spray this year... so may give it a try on a new Toro I just purchased to see if it will help on heavy wet snow. I never have done any of those things other than store it inside and have not had any issues. Have had yard machine and Ariens. Yard machine was only replaced because I got my hands on a much larger Ariens. The Ariens was a used unit from a townhouse complex and thus had a hard life. It decided not to start this year... I believe no spark. So instead of spending a weekend trying to figure it out I just purchased a brand new Toro. Anyway seems like solid advice... I just have not done most of them 🙂
Thanks for sharing and watching!
I had a Canadian built Craftsman 8 HP snow blower ( Tecumseh engine) that i bought in 1982 and gave away in 2017 to an outboard mechanic. I alway turned off gas and ran till engine stopped after every use. In spring I drained carburetor after emptying gas tank, put 1 spoon of 2 stroke engine oil in the cylinder through spark plug hole, followed by several pull of crank string. Stored until the next snow fall. Ran flawlessly until 2015 when I replaced clutch and carburetor. Changed engine oil every 2-3 years. It was a bit rusty after 1 1/2 generation. But was still running OK when I donated it.
Thanks for sharing!
One additional thing that I have always done is to shut down by turning off the fuel rather than ignition. Keeps the plug and carb cleaner. Starts first or second pull every time!
Thanks for sharing
STARVE...THAT...CARB!!! This is the most useful tip for anything with a carb.
@@davidspoelstra8527 thanks for sharing
I’m smiling here. My Mom taught me to slow the machine for a bit before turning it off, brush it off, and set it on a mat over 40 yrs ago!! She was a widow, and she and I did a ton of projects together!!
Thanks for sharing Pat!
I fill up a couple gallons of ethanol free premium in my car before filling up my gas can to make sure there's no ethanol left in the pump/hose, then I add about 3x the recommended amount of Sta-bil 360. Keeps my snowblower and mower carbs perfect, they both start with one easy pull every time. I never drain the carbs after each season either.
I spray just about every surface of the snowblower with Fluid Film. That stuff stays put compared to WD40 or even silicone spray. Keeps all the chute hinges, gears and surfaces from rusting. That waxy fluid film really keeps the inside of the auger housing slippery too.
ROCK ON Andrew! Thanks for sharing
Lower Westchester NY here..got my Toro self propelled 8 hp in 2003 and follow the manufactures recommended maintenance religiously. Your videos are great though and I have never used silicon spray before but will certainly start. In 19 years the only thing I have done is replace the original skids. Like you emphasize, an ounce of prevention is really worth the effort. Keep up the great work!!
Awesome neighbor! Thanks for sharing and watching!👍
Another way to keep snow off and surfaces slick, is to use furniture polish on the inside of the chute and exterior of the snow blower. Cheap and it works great.
Thanks for sharing!
Car wax is good for protecting your snowblower.
@@dotarsojat7725 yep that works too!
Good job dude....nice video. As someone who runs a very large facilities department (we have 14 snow blowers) I can tell you that ethanol in the fuel has caused more headaches than anything else. We started buying non-ethanol fuel (TRUFUEL) in bulk several years ago and it has made an enormous difference.
Thanks Bill! You’re right ethanol free gas makes a huge difference! Better starts and no carb drama! Thanks for watching!
Wouldn’t that be insanely expensive? I only run that after the end of the season through the carb with a touch of Stabill. To use it as gas All the time is a no needer. I only do that with my $700 chainsaw
@@doejon6821 It really does work well in the engine! And if ethanol free isn’t available this may be the next best option!
I run premium gas in all my small motors. Never a problem. No ethanol. More power.
I've got to second this. I drive out of my way to a gas station with one ethanol free pump and pay extra for it. It's great in the lawn tractor and snowblower.
Never did any of this except for one. On my 1996 Craftsman snow blower it starts on the first pull every time. I replaced the belts first time in 2021. I do believe in fresh oil and spark plug every year. Only thing I do is run all my gas toys at an idle for about a minute after use. I even let them warm up at an idle for a minute or two before using. None of my lawn toys have issues. In fact all my toys are over 25 years old and run better than the new products on the market. I do drain the fuel after every season and run the carb dry. I do put Marvin Mystery Oil in Fuel & Oil and Lucas injector cleaner in the fuel in all my gas powered toys. By the way no rust holes either. I live in NY it gets used every season on multi properties( mine and the seniors ).
Thanks for sharing this Oil man! Very cool tips! 👍
I've been doing everything in this video for years except for elevating the blower. Never thought of that. I learned the hard way not to sit it directly on the concrete floor. I also run one of those 240v garage heaters just to warm it up in there and keep it warm while I blow snow. Once it's back in the garage the snow melts off the thing pretty quick.
I was looking into one of those heaters! Perhaps that could be a summer project for me to set it up! Thanks for watching!
And don't forget to use gas stabilizer when you're filling you fuel canister. This way it helps keep the gas as fresh as possible - in case there are longer periods of time between major snow storms. It also helps keep the fuel lines and carburetor clean of gum buildup (from old gas). At the end of the season empty out the gas tank, then run the snowblower until it starves from no gas. This will ensure the least amount of gas remains in the lines (and fuel filter). Then next season get new fresh fuel, add gas stabilizer, fuel up the snowblower, prime it according to your model's instructions, spray a little starter fluid into the carburetor - and watch that baby turn on with one pull (maybe two - that's still good). I recommend turning it on at least two weeks before your snow season typically starts. This way if there is something wrong, you have enough time to fix it (order parts, or have it services at the shop).
I agree test it a few weeks prior to make sure it runs before the season. Thanks for watching!
The biggest issue I have is not being able to drain the old gasoline from the tank. I am thinking to cut the fuel line and add an (accessible) drain valve.
@@normferguson2769 that’s a good plan!
This is the comment I`ve been looking for. When I get my snowblower back from the repair shop in a few weeks I will follow these instructions. 🙏
@@normferguson2769 I have used a turkey baster to get some gas out of the tank. (Don't borrow one from your kitchen). It gets down into the gas tank. Does drip some when removing from the tank; then wipe it off with a paper towel or rag. Keep in mind there is some gas in the rag. My lawn- mower takes the same Ethanol Free gas so it's "fresh." Novelty of snow wears off after the 1st 4 feet, however. Am in Erie, PA.
Great video as always and awesome info. Your blower cut through that snow like butter! Question, would fluid film be a replacement for the silicone spray? Or will fluid film only prevent rust, and not do very much as far as not allowing the snow to stick?
Hey Billy! Fluid film will work on this situation but the fluid film spray pattern is very narrow. You’ll have to use more and at $10+ a can it gets pretty pricey. I save fluid film for very rusty spots. Silicone and even wd40 have wider spray patterns covering more surface area and you end up using far less. A can of silicone will last a long time because it’s spray pattern is very wide! Great protection too! Fluid film does prevent snow from sticking but it does a better job preventing rust. Thanks for watching Billy!
@@GarageGear thanks for the reply and great answer! I’ll keep both on hand for both situations
@@Bleleika2 your snowblower is gonna ROCK this winter! Happy snowblowing my friend! 👍
Another awesome video!! Didn't think about it. Got my new snowblower few months ago and have used it twice. Never did i do any of these tips. After use just moved it into the garage and let it melt completely. Will take these tips to my grave bud, haha!!!
Question - can i use wd40 inside the auger compartment and the outside? If i use wd40 on the outside should i wipe it down or leave it as is? Thanks
Spray it all over inside and out! It will protect it well as is. Thanks again for watching!
I've got a 16 year old Craftsman 24" that gets a hot supper every time she's used. I replaced the belts last year and serviced the carb. Still runs like a top every time I start it. It starts so easy I don't even use the electric start.
My garage stays around 40F all winter so the snow melts off quite easy. I have a floor drain - so all the moisture goes yonder.
No throttle on mine, nor do I understand why there would be one. When would you ever run a snow blower not on full power?
I let mine idle for about 3 minutes before I shut it down.
And perhaps the most important tip - don't use Ethanol gas. It attracts moisture and if you have a light winter then that gas is sitting in the tank just sucking up the moisture in the air.
I only run non-ethanol gas - in most cases that's premium. Yep, I run premium in my blower and my mower. Ethanol gas is fine in a car that gets a regular refresh of fuel. But small engines that often sit unused and are used on a regular but stretched schedule are just looking for trouble with ethanol.
Don't even mention fuel stabilizers. Keep fuel in a can and only fill what you need. If it sits for more than 30 days - put it in the car.
All great tips here! Thanks for sharing my friend!
For those that can't store their snowblower where it's above freezing, after shutdown I always move the throttle to the 3/4 position. That way if the throttle handle or cable gets frozen in place in the OFF position your snowblower will still start.
Good tip! Thanks for sharing George!
WD40 is available in gallon cans also. I prefer using the liquid WD40 in a heavy duty spray bottle instead of aerosol cans. My aerosol cans always seem to have propellant issues because my garage is unheated.:( WD40 also works great on snow shovels & snow pushers.
I’ve been considering this for a long time. Might be taking you up on this idea. Thanks for sharing Larry!
Try Fluid Film. It works way better than WD-40 and it doesn't wear off nearly as fast. I swear by that stuff.
Hi JB. Great video's. Just tried to use my neighbors Ariens 11528LE snow blower to clear her driveway. I found the right side of the auger spinning freely. When I checked the shear bolt, the head of the bolt and the nut came right off. Tried to locate the remainder of the shear bolt to tap it out of the hole but I can't seem to find the right position. Do I need to remove the shaft and auger to locate the bolt and tap it out? Thanks, Dave
Just to be clear Dave… is part of it stuck inside and you can’t get it out? If you line up the holes and insert a new shear pin you should knock the other free. Let me know .