Thanks bud. The wide variety of cabinets is what I first noticed. The fact that you could design to a certain extent your own set up was great. As cheaper then the big guys this system was it was still a good amount of money. So I thought a cover was defy needed.
Thanks bud. Matching side cabinets was one of the main reasons I liked this system. The only issue and it was minor was having to flip one of the side cabinets so the doors both open outward.
well done , great video , I think the cabinet shelves would be too deep for me , a shorter person with shorter arms might struggle to get stuff out right from the back lifting it over shorter / flatter tools in front . Thanks
Nice box man, I'm really wanting a 72" box but I'm kinda torn between a top cabinet like yours or a hutch. I work at a Chevrolet dealership as a tech & im sure this would do just fine there
Thanks Nitro. I was as well but the more I thought about it the more I knew I would have a dedicated work space very close. Plus I will eventually build cabinets around it and want it to blend in as seamlessly as possible. If your going to use it at a dealership you might want to check and see how much space they will allow first. This cabinet system is just over 111"s wide.
Larry Jonap so how did u put it together an is it a pain to move ?an also how do u reach the top drawers ?so when I buy this I think I'm going to remove the wheels an set it on the floor with maybe something on the bottom to keep it from rusting cuz the wheels make it way too high an I don't wanna do a step stool so those r my ideas let me know what u think please. BTW I subbed
It is definitely a two man job when it comes to assembly. They are some really heavy duty cabinets. Plus I'm kinda picky when lining up the side cabinets. I have a pull out step I made that slides under the cabinet that I use for the higher drawers. Plus I put less often used stuff in those drawers too. I would leave the wheels on as I'm always dropping stuff and debris tends slide around from time to time when working on different near the cabinet. With the wheels on debris and tools tend to slide underneath instead of singing the bottom of the cabinet if it were sitting directly on the floor. Hope this helps?
What in the hell !! Dude you have a super nice monster toolbox like that at home!! Thats crazy.... but whats worse you got all those tools in that big ass box and you couldn't put those thick caster wheel supports on.....now thats embarrassing 😳 But that is one Awesome box you got.... just don't tell me you cut hair or work on a computer all day for a living......
you are the first guy to actually have a video review of this brand! thank you!
Thanks Andrew. That's a lot of the reason why I did it.
Very nice setup! You've impressed me, and I really like that tool box brand.
Thanks bud. Shes kinda dirty right now. Lol
holy shit. want some garage with that tool box.
What do they say? Everything's bigger in Texas. lol
Thanks bud. The wide variety of cabinets is what I first noticed. The fact that you could design to a certain extent your own set up was great. As cheaper then the big guys this system was it was still a good amount of money. So I thought a cover was defy needed.
our company also sale tool cabinet, you can contact email:lily@reder.com.cn
Love your tool cart setup. If I only had a garage! Great first video btw. 👍🏻
Thanks Neil
Kick Ass set up, thanks for sharing!
Thanks Mark
I have the same box. Thanks for showing the top chest and cabinets!
My pleasure
It looks great! It should last a lifetime as long as it stays in y0ur garage.
Jarvis Rinklebaker it's not going anywhere for a long time. Lolol. It's actually getting ready to have a new home
Holy crap that's a tool box!! I would need a ladder to see what's in the top drawers lol I'm only 5ft1" Awesome box though you lucky duck :)
Niamh Healy thanks bud
That toolbox set up from snap on would be upwards of 40 grand
I know. Yes there are advantages to Snap On, but for the price savings you can't beat the Tool Vault and other lines from Strictly Tool Boxes
Nice video.
Great video and extremely nice toolbox
nice love the side cabinet
Thanks bud. Matching side cabinets was one of the main reasons I liked this system. The only issue and it was minor was having to flip one of the side cabinets so the doors both open outward.
Just came across this and really dig that beast of a chest! I didn't see a tool box tour on your channel and hope you do one soon.
Thanks Jefferson. I'm in the process of moving and will do one when I'm set.
looking forward to it.
sweet box man it's huge!
love how deep it is would kill for a box that big I'm tired of having to pile tools on top of each other
Thanks Derek. As is the norm with me, I wanted the biggest I could get for the money.
Nice setup. I agree with the guy who mentioned the side-cabinet.
Thanks bud
You need to do a complete tool box review drawer by drawer :D
Awesome box
Thanks bud. Will do
Same set up I'm going for.
well done , great video , I think the cabinet shelves would be too deep for me , a shorter person with shorter arms might struggle to get stuff out right from the back lifting it over shorter / flatter tools in front . Thanks
Nice box sir
That's a nice setup
That's a great box sir. Almost insulting to call it a box.
Good job.
Nice box man, I'm really wanting a 72" box but I'm kinda torn between a top cabinet like yours or a hutch. I work at a Chevrolet dealership as a tech & im sure this would do just fine there
Thanks Nitro. I was as well but the more I thought about it the more I knew I would have a dedicated work space very close. Plus I will eventually build cabinets around it and want it to blend in as seamlessly as possible. If your going to use it at a dealership you might want to check and see how much space they will allow first. This cabinet system is just over 111"s wide.
Larry Jonap I'll make room I got two stalls 😋
Nice box,
where you buy your nice tool box? Thanks
How do you access the top drawers ? Or even see what's in the drawers, seems like it would be over your head
I have a pull out step that rolls underneath the middle cabinet. Plus I do put some of the less often used stuff up high.
Does the top box have a part that opens on top or is it flat?
How the heck do you get tools out of the top drawers? A hutch would have been better.
very nice
Thanks bud. I had been looking for a while.
Great tool box looking to buy this exact same one. Can u please do a tool box tour .
I would love to right now, but just don't have the time. Sorry bud. Can I answer any questions for you until I do?
Larry Jonap so how did u put it together an is it a pain to move ?an also how do u reach the top drawers ?so when I buy this I think I'm going to remove the wheels an set it on the floor with maybe something on the bottom to keep it from rusting cuz the wheels make it way too high an I don't wanna do a step stool so those r my ideas let me know what u think please. BTW I subbed
It is definitely a two man job when it comes to assembly. They are some really heavy duty cabinets. Plus I'm kinda picky when lining up the side cabinets. I have a pull out step I made that slides under the cabinet that I use for the higher drawers. Plus I put less often used stuff in those drawers too. I would leave the wheels on as I'm always dropping stuff and debris tends slide around from time to time when working on different near the cabinet. With the wheels on debris and tools tend to slide underneath instead of singing the bottom of the cabinet if it were sitting directly on the floor. Hope this helps?
Larry Jonap thanks man I really do appreciate yr thoughts an concerns
Nice, glad I saw this video, pretty sure We talked about this box on before you bought it. Aren't you on garage journal
Yes Jake I am. I believe that was where I first posted pics
nice, glad to see the tool box tour. I did one of mine too. I like the set up!
The only thing I worry about now is if I ever have to move it. lol
Yeah, I had to move mine from the one shop to where I currently work. Not fun! haha
Dude, I had no idea you had a channel. I just subbed. I'm Jarhead0408 on the GJ.
Hey, three years later... how’s it holding up?
Very good. I've actually moved it into our new house and it did great being loaded and unloaded
Its beautiful but I hope you never have to move.
Yeah that's what I'm trying to figure out now. Lol. I know it will def include a tie truck.
How do the drawers close? Do they slam shut or have a bit of a cushion?
Pretty good cushion. It also comes with what they call, soft and hard detents. You can make the drawer close either way depending on your preference.
Nice wow
Is it TV-6222-4SC?
What in the hell !!
Dude you have a super nice monster toolbox like that at home!! Thats crazy.... but whats worse you got all those tools in that big ass box and you couldn't put those thick caster wheel supports on.....now thats embarrassing 😳
But that is one Awesome box you got.... just don't tell me you cut hair or work on a computer all day for a living......
Did the delivery guy unload inside your garage?
No. But he did drop them in the driveway.
That's hot
little over kill for your garage aint it?
How do even see what's in the top drawers top hutch would be better
You kinda don't. Lol As much as I like the hutch top, I wanted maximum storage space. I'm working on some sort of easily accessible pull out step
I want tiling tools box
How does tool vault compare to Montezuma?
I'm not familiar with Montezuma.
Uuuuuuuuhhhhhh
Drawers that high, is that useful..
Yes. Just less used stuff
Nice video but looking at that box and then the snap on that box looks cheap
I dont think the top drawers would be very useful.....and i am 6 5
набор для мужика