Video není dostupné.
Omlouváme se.
Xaar 1003 Ceramic Head Recovery with PHD15
Vložit
- čas přidán 10. 07. 2019
- Xaar 1003 heads from ceramic printers are not easy to recover. But a fully automatic PHD15 can do it. You can use the flushing solution that comes with your ink. The recovery programs uses 3 cycles: Mesh, Vacuum at 100% ultrasound and a Forward with 30% ultrasound. The pressure never exceeds 5psi and the fluid temperature should be 35-40°C.
Hello! What printer is this head being used on to create the sample at the beginning of the video?
Can it be cleaned with another brand's printhead?
Available
Hii
Hi Ketan