Ford 1998-2004 F250 F350 F450 F550 Excursion Wheel Hub Removal And Install
Vložit
- čas přidán 12. 05. 2020
- Get Your Parts Here
venturestruckparts.com/produc...
How to remove and replace your wheel hub on a Ford Super-duty F250 F350 F450 F550 or Excursion 1999-2004
Ventures Truck Parts
venturestruckparts.com/
1800-464-1713 - Auta a dopravní prostředky
Nice job! Most of these look the same but some come with different size threads, so before you leave the store check that your lug nuts will fit it. Yes you'll have to pull a lug nut but it's better than finding out when it's all apart you can't put your wheels back on. Yep it happened to me, so when I did mine I had to remove the new studs on my new hub and change them out with the ones that were on my old Hub Assembly. Thanks for sharing. Thumbs up. Best Wishes & Blessings. Keith Noneya
Thank you for the help! Along with my son's girlfriend's dad on the phone and this video, it allowed me to change out the wheel bearing assembly on my 2000 Ford Excursion when we broke down on the side of the road today
My 2001 F350 dually had right hub replaced @ 251K and the left one @ 253K two years ago. The truck tows goose-necks and just turned over 280K. It's never been to the shop. Anything done to it has been done in my Dirt Driveway. A 3/8 sheet of plywood supported the six speed trans and transfer case last year when the clutch and carrier bearing was replaced. I got the truck used off eBay 16 years ago.
Great video, I am getting ready to replace all the bearings in my 02 F350 dually. I have 253K. As far as I know all my bearings are original. I will by the bearing you recommended. Thank you!!!
Great start to finish with details .
Damn what about the seals and knuckle. Wish you would have filmed that too
Great video! Thanks for posting. I'm having trouble finding those four thrust washers. Any parts numbers would be great.
Great 👍👍👍
Can you tell me the (thread size) of the 8mm bolt(head size) that holds the abs line to the steering knuckle? Thanks for your help🇺🇸
Is there different hubs for autolockers ?
Vacuum hose ?
what did i do wrong my axell slides andk out from the knuckle 😮
What kind of grease?
What is the part # for this wheel hub?
🤙🤙🤙🤙
What if you can't get the hub locker out
You have to get it out to take the rest of the axle apart.
My 04 F350 hub looks nothing like that. 😅
Can’t get my hub off like it’s stuck or something
Did you make sure the snap ring is removed and all 4 nuts on the backside?
A pulling tool would have been better than beating on it.
More like 99.5-04
That's BS. How did the knuckle become new?
The knuckle was cleaned and painted. Not a new one. Just a good used one.
@@VenturesTruckParts thank you for the clarification. I thought it was a different truck. Excellent video overall