Speed limiter removal on Vsett 9+
Vložit
- čas přidán 26. 08. 2024
- Removing 25 km/h speed limit - Vsett 9+. Test the scooter before you start removing the speed limiter. Some scooters do not have a speed limiter plugged in.
Note: In the last batch of the Vsett 9+ only one connector had to be disconnected, not two.
I can confirm that this works in Australia on Vsett9 model as per the video. As previosuly mentioned the only difference on the Vsett9 is that there is only 1 white cable which does have a black plastic connector as seen in the video. Unplugging this connector removed any spped limiter and the speed measures at 52kph on the display when tested on workbench with no rider.
Good video 😎
So extra 5mph 28-33mph
I’ve always believed it’s better to do it right rather than just cut them
Isn’t disconnecting one of those white wires enough, not two? Reason being it forms an electrical loop.
Usually at other scooters is only one cable in loop but here are two.
its dual controller for dual motors, 2 cables
And how much it's doing without the speed limiter. More than 50kmh?
It depends on your weight and terrain but in ideal conditions you can reach speed between 40 and 50 km/h.
I'm 100kg and the vset9 goes 40kmh with me
hi thanks for the video ... i want to buy some better alum keys for the scooter ..Q.1 do you know if they are they use metric or imperial size on these scooters ? and re the speed limiter, the dude at the shop said i could just cut the white wire without opening the board {you can get to it in the cable wrap behind the front wheel } do you need to cut both white wires...he said just cut one at this point in the wiring? many thanks from australia
Hi. In the EU, all the allen screws on this scooter are metric. I don't know if the manufacturer doesn't put imperial screws on the Australian market so you have to check it or ask in some Australian facebook scooter group. Buy a really good quality Allen wrenches, preferably with a T-handle from a reputable brand. You'll need them when you dismantle the wheel rim or brake disc. Also, get a strong pressure lighter (so called "blue flame"), as the screws in the wheels are sealed with a threadlockers and will only loosen when strongly heated. Just hold the "blue flame" on the screw head for 15-20 seconds and the glue will burn off. You can of cource also cut the white wires in the cable wrap behind the front wheel but it's not that hard to open the deck and disconnect the two connectors. It's a cleaner job, I'd say. Because the cables are in loop, you can see in the cable wrap behind the front wheel 4 wires. You have to cut all 4 wires because you can't tell which ones are paired in the loop. In any case test the scooter speed before you start removing the speed limiter. Some scooters do not have a speed limiter plugged in.
Hey I have removed all the screws but I am not able to remove the pad on top of battery it looks like it’s supper sealed
I have the same problem. Did you find a solution? It looks like the deck is glued down
Can you do the Vsett 8 plus as well?
Sure I will do that. Unfortunately, sales are weak over the winter season now, so I'll have to wait until I get a Vsett 8 to my hands.
@@pavelvanout sounds like a plan.
Is this just for uk models I can't find that wire on mine idk
Hi,I would like to buy vsett 9+ I was wondering if there were any problems with it.
Yes, small 8.5" wheels have frequent tube punctures. I'd recommend something with 10" wheels. Bigger wheels are also more comfortable to ride.
Hello , I saw on the video of the vest 9+ you put a seal for waterproofing.Could you make a short video to explain how did it and which products used? Thank you
Hi, I did not use any extra seal for waterproofing. Everything in the video inside the scooter is original.
@@pavelvanout ok thank you
Can you tell me if you have the limiter still on you also have a limitation in the power output? Right?
Yes.
@@pavelvanout if you have 25kmph on a 650w motor, the whats the real power you have ??
@@gabrielconti6504 Sorry, I do not know that.
Hi, does this void the warranty in any way?
Hi. Sellers in my country don't care if the scooter is unlocked or not. It doesn't affect the warranty. But I don't know the rules in your country, so it's better to ask the dealer you bought it from.
How do you know its a speed limiter wire?
Because I look, try, test and see that it is a speed limiter wire :).
I have the vsett 9 and I unplugged two white wires, Is it possible I could have unplugged a wire to stop it from charging
You can see in the video 2 charging cables I unplugged before removing the speed limiter. Check if you plugged both charging cables back. The white cables have nothing to do with charging.
Is that the only 2 black and white cable that I have to disconnect
No black cable, only white. However, Vsett has removed the disconnectable connector from inside the deck so it is better to use this simple method as be seen in my another video here... czcams.com/video/jUMCDgQJ4GQ/video.html
I disconnected white wires but it doesnt show any change on km/h same speed..please help Vsett 9
Hello sir, did you figure out what to do and how to remove the speed limit? I disconnected exactly the same white cables, and the speed is still limited.
Hello, I recently bought this Vsett9+ scooter. I saw that at position P03: Voltage level: 24V, 36V, 48V, 52V, 60V. What do these voltages mean? If I set 24V or 60V, is there any change in the way the scooter is used? Does it change the degree of battery wear? Do they increase their performance at the maximum range to approach the range indicated by the manufacturer? And there is one more thing, at position 10, 13, 14, 19, it says Reserve. What can this be used for? Can someone enlighten me? Thank you in advance. Safe roads everyone!
Hey man. DO NOT change original voltage of scooter in this settings. If you have Vsett 9+, keep 48V! If you change it to another voltage your scooter will not charge or will show incorrect remaining battery. The voltage must corresponds with your scooter voltage system. At position 10, 13, 14, 19 where it says Reserve it means there are inactive settings but in the future models there can be some additional settings.
@@pavelvanout thank you!
Hi. is it really enough just to unplug it?
Yes.
Can you remove the speed limiter on the vsett 8
Yes, it is possible but currently I do not have Vsett 8 available to make a video.
Is this the same for the Vsett 9?
Probaly yes but with one white cable ony.
@@pavelvanout cool, also does the VSett 9 have speed modes or is the speed solely dependant on the throttle distance? Because after having removed the speed limiter, how do you control the speed?
@@TravisG Every Vsett scooter has 3 speed modes. You can easily switch between them on the display. But first you have to remove the speed limiter, if it's plugged in.
@@pavelvanout Ooh okay, so the speed modes only become available after you've removed the speed limiter?
What speeds are the 3 modes?
Sorry for all these questions, I'm looking into buying one but trying to do some research first to confirm this is the one i want.
@@TravisG Yes, exactly. The connected wires of the speed limiter disable the speed modes on the display. I can't tell you the exact values because it's different for every model. It depends on the overall performance of the scooter.
After unscrewing i am not able to take the top off it seems to be stuck is there anything that I am doing wrong please respond
If you removed all the screws on the top plate, you did everfything ok. Just use a bit force to release the plate.
@@pavelvanout i have literally no grip on it there are just 12 screws but then it still seems to be stuck there
@@herbodtabrizeh446 There os probably plenty of silicon. That's why it's holding the plate too well. Use more force or heat it up around the deck by heat gun.
@@pavelvanout it literally seems impossible to open I’m worried if I damage the scooter can I possibly send you a picture somewhere I really need assistance
@@herbodtabrizeh446 You can upload picture or video for example to Google Disc and give a link here.
will it do any harm on the scooter? drain more battery same on gear 2? thanks
No harm on the scooter but sure, the higher speed drains battery more.
I already open my scooter but i didnt see any white wire..
@@KaloyGamingPH Because the speed limiter is mounted probably only in scooters for EU countries.
Hi I have a vsett 9 I tried to copy ur video but the wire is different to your video there is no white wires to unplug and the only white wire I can find connects to the little black box located at side of battery is this it or not? There are 3 wires leading to it red green and white any idea
At Vsett 9 (9+) there is only a white wire as speed limiter. Not combined with another colour. Dig deeper in wirings and find the white one.
@@pavelvanouthello, I did exactly as in your video. Disconnected to loops of white wires. It did nothing with the speed limiter, the only thing that changed is it now accelerates faster. Could you please assist?
@@dennisdashevsky2400 Hi. Do not bother openning the deck and look this simple way. czcams.com/video/jUMCDgQJ4GQ/video.html. You also have to change speed settings on your display from gear 1 to gear 3. Also check if you have DDM (Dual Drive Motor) switched on on the switch of your handlebar (on the left side).
@@pavelvanout thank you for your fast response. I'm with Vsett9.I already opened the deck and disconnected the white wires, because I didn't want to cut it. I am at gear 3 and my p8 vslue is 100 and still I cannot see improvement and my speed is limited.
@@dennisdashevsky2400 I hope you know that the speed is limited to 25 km/h.If it goes faster, it means it's unlocked already.
Isn't the top speed already 33mph not sure what this even does besides removing wires
Scooters imported into EU countries have a speed limiter set at 25 km/h (approx. 15 mph). You have to remove the wires if you want to go faster.
Decent
is this the exact same for vsett 9?
Hi, actually yes but there is only one white wire. However, in the last Vsett shipment there was no disconnecting connector and the white cable had to be cut and insulated.
What is going to happen if i remove the limiter? What is the advantage and disadvantages?thanks
Hi, first check if any limiter is mounted on the scooter. Scooters are usually supplied with a limiter to EU countries to comply with law. The limiter blocks the speed to 25 km/h. By disconnecting the cable you can unlock the speed to full speed. There is no disadvantage or it cannot harm your scooter if you do that. You just unlock the speed.
unlocking speed is faster way to another world, just that
@@milordas :). Yes, definitely it is.
What ‘extra’ speed does this give?
You will get maximum possible speed up to 33 mph/53 km/h (under specified conditions).