Cleaner Engine Bay Wiring | Scrapstang 5.0
Vložit
- čas přidán 16. 04. 2024
- This video was sponsored by Sarah n Tuned & Michael Sanchez!
Universal 22 Circuit Harness in video: amzn.to/43LYaZ4
Generic Crimpers: amzn.to/4aDdbPL
Wire Crimpers: amzn.to/4cHDpBP
Tessa Tape: amzn.to/3vH1HLA
Heat Shrink: amzn.to/3VOmiIC
Using the Speedway Universal 22 Circuit wiring harness
patreon.com/RookiePilot?...
D-Window Wheels: amzn.to/42cggCJ
ROOKIE MERCH: kmpaint.shop/collections/rook...
www.buymeacoffee.com/rookiepilot
Some people have also asked if I have a wishlist, so here you go!
www.amazon.com/hz/wishlist/ls...
Instagram: @rookie__pilot
Rookiepilot66@gmail.com
Angel Robles
1501 S Cherrybell Strav
#27794
Tucson, AZ 85726 - Auta a dopravní prostředky
It's always best to have a solid plan before you get too far into things.. great work on mocking things up. It'll save headaches down the road..
Huge HUGE congrats on 10k!! Keep up the hustle... onward to 100k now! 🤘
10K is big - well done Angel, there is a lot to like here.
I like the slightly raked stance. A little taller in the back is nice.
Right!
That raked stance is old school. More like my era.
By the way…today is a special day. This is the date of the original launch of the Mustang. Friday April 17th, 1964. 8 weeks to the day, before I was born. Cool beans.
I’m really liking the clean look you’re going for in the engine bay. Keep up the good work.
wiring ay , (knowing smirk) so you are into some wiring on this build eh? - well Gracias Sarah n Tuned y Michael Sanchez y Angel.
Yes! Fun fun
I see some of Sarah's intricacies splling onto you like having a white board
I think she told him how easier it would be, if he worked it out on a whiteboard beforehand. This helps to figure out problems beforehand. That is the reason why when she rewired Mr.Dos she didn't have alot of problems.
If you ever have to straighten a messed up hole in the future again, here's a little tip: use a piece of threaded rod, a few beafy washers and 2 nuts. You can then straighten the bent hole back by tightening the nuts and when those nuts are tightened you can use the threaded rod as a lever to manipulate the sheet metal in that area if necessary. Greetings from Belgium!
2:13 ya know, there is a new invention called "oil" that might help with that squeak. It's amazing!
The wire looks like it is good quality. Good thing.
That light falling was hilarious.
wheel bearing grease will quiet down the hoist balancer
Thank you!
I came here from Sarah's channel and this is my first video. Congratulations on the 10k
10,000 yay! Very cool.
I had no idea the engine sets so far back. It ought to handle well that way.
Congrats on the 10K Angel. It’s just the beginning!
If you put the starter solenoid in the trunk, you can have the big wire for the starter only hot when starting, and run another wire hot all the time for the rest of the front of the car.This can be a smaller gauge and the big wire won’t burn the car down if it rubs against something.
That connector you used for the starter/alternator wires is called a liquid tite fitting. Keep up the good work!
Thanks, I was racking my brain trying to remember the name of those things. As a marine diesel mechanic that also built up gen sets with enclosures, we used those things by the thousands.
What are the odds you and Sarah are both wiring stuff? 😆😆😆 I can't wait for you to run this thing. I was thinking of something Sarah said in her last video. She's shown me new ways of doing things that will probably stay with me all my life. She's also shown me her stars in her part of the world, baby cactus out in the wild and even real life little road runners that hang out near her shop. (I never seen one in real life till she showed me) She was feeding one of them and she said she wasn't feeding the wild life and that she was the wild life there in the desert. It's been on my mind because where I am in the world, I feel like the wild life. They monitor me, keeping me caged up and are always making sure I have limited resources to control me and make sure I never have anything of value. I hate them all so much...
Great restore job young felah,l have a similar project and needs to get motivated before l drop off. Like you and have the talent to get it done as soon as everyone stops coming over for a mens chat
Whiteboard, I wonder where you got that idea it’s cool. I wish I had thought of it here ago. Sure be a piece of paper nails in the windshield. Stay clear reading late what you’re doing that very informative very clean the way to do it, brother.
"Ignition Hub"
Oh... the "steal me junction"
Lol
Stop dont give people ideas 😂😂😂
@@rookie__pilot nah, i got that from Vice Grip Garage, lol
@2:46 I see something white, looks like a MGA but not quite stock!
Congrats on 10k Food Cake!
Glad to see you reached 10000. Loving the content. Thanks for sharing
Congrats on 10K!!!!! I'm always enjoying your channel and also watching it grow!
Congrats on reaching 10k subscribers.
I would put all that stuff on the outside on the firewall. It would look cleaner and if there’s ever a problem with any of it, you don’t have to crawl under the dashboard or it is a short you don’t end up with a fire inside the car under the hood and it’s safer just a thought from all 64 year-old man who used to mess around a little bit with cars.
........ you'll need the grounds, body bonds, & battery leads
my only suggestion is that you fit the main battery cable to the busbar and then fit the starter solenoid off one of the fuses. it will keep it all safe. otherwise if your starter burns out it could melt the wiring all the way to the battery.
On to 100k!!! Let's go Angel:)
No one does it like Sarah not even angel food cake
Food cake getting er done
yeah i kinda dig the higher rear end tbh. Gives you way more flex when you give it the beans, y'know? :D
Gratz on 10k, you're a humble man, and that's sexy as hell from where i come from. Onwards and upwards!
Was is premeditated that you and Sarah-n-tuned would both be wiring projects at the same time?
Umm not really, we just got to that point at the same time i guess. But she DID partially sponsor this harness 👍🏻
@@rookie__pilot I'm loving both projects and starting to wonder if the V-8 Celica will hit the road before the scrapstang! You're making great progress and she's hitting obstacle after obstacle!
I'll be watching both with max enthusiasm!
Congratulations on the growth✌😎👍
If the battery is in the trunk you are going to need a larger gauge cable for the Starter. probably 1 ga. or 1/0
Congrats on the 10k.
The slight lift to the rear in the Mustang looks fairly period to me. And i remember having a lowered Cougar of the same chassis, it really sucks when the diff smacks into the floor when you hit a dip too fast.
MFG is Heyco _Strain Relief @ 6:23
Congrats on 10k.
I would not put the solenoid in the interior. On my Mustang the solenoid stuck on and turned red hot right before it went into flames.
Congrats on 10k!
Congrats on 10k subs! Steady as she goes. She will be a cool and reliable stang.
👍
CONGRATS 10,000!... looking good!
Outstanding Angel. 10K! Thanks for the project hint. Looking forward to firing up the stang.
Congrats on the 10k!!! I agree with your original thought that the ride height should be the same front to back
Nice work on the wiring! Congrats on 10k subs, you deserve it and I'm sure there's a lot more coming your way!
When I use the factory hole, run the wires from the inside under the dashboard over to that hole and then back around I know it’s a long way, but it would keep the engine be looking really clean instead of having two sets of wires and making an extra holy really don’t need to make or you can do what you want, but I would run the wires across the dashboard and come back that way. Everything will come out all the wiring would come out of one hole and I think it would be cleaner, but, let me
The wiring is turning out nice! Congrats on 10k! Woot!
Hi Angel looks like you’ve got a great plan. And it looks like it’s gonna go great. Be interesting to see if moving the engine back and down makes a big difference in handling. Curious how the shifter will work moved back like it will be after moving the engine back? What will you have to do for clutch linkage? Congratulations on 10k subscribers! Stay cool
Curious about the shifter and clutch linkage? Me too 😂
10K BABY 🎉. Well deserved
Nice work!
Congrats on the 10K! 😎👍🐎🏎🏁🏁
from my experience, my car an HSV VE Clubsport R8 has a battery in the trunk, and has a serious case of hot start problems. Engine warm, it struggles to turn over. A lot of people told me the battery in the trunk is not helping the situation with the long power cable run
Woohooo congrats on 10k!! Would it be wise to run a fuse between the solenoid and battery in the trunk?
No regulatory/rectifier? I always hated that thing 😂
Good vid man...I do have a question though... If you wanted to hide the wiring as much as possible. I thought you would drill a hole behind the engine and route the wires out of eye shot... your car though mate....I really like the through panel fitting...Im stealing that idea when I wire the Barracuda...subbed today too... after your 10K milestone, to kick you off on 20K subs...
that looks like a generously sized crumple zone
😂😂
Where’s Sarah? 😂 Grease bro. Yeah that looks very good.
Have you sorted out how you're going to run the horn wire, the high and low beam headlight wires, and the turn signal and parking light wires?
👍👍👍
Just make sure your wire ends (eyelets?) are not too big for that plastic passthrough.
You will forever be be angle food cake! Hahah
👊👍
MONETIZED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
You only need 1k subs to be monetized pretty sure he has been gor a while
Can you not grease or lube that angle thing for the engine hoist?
Is that an MG at the back(the secret) just wondering( at 2.40 min)
Put some grease on your engine leveler gears.
What does BUS stand for? binary unit...?
That's.. not how we use those cable glands, but well done regardless. 😅
Hello Angel, there's a channel called "Pilot Debrief" I don't know if you watch it, but it seems like a great channel to learn from others mistakes..😎👍
What bus bar is that?
Why did you bolt the transmission onto the engine without a flywheel?
The transmission is an empty case right now, it will likely be removed again before we start it
@@rookie__pilot yeah you'd be a beast of a lifter if that was full of gears! "Meh, just bringing this tranny over, no problem amirite"
Great video
😎🍺👍🇦🇺
i see sarah had influenced you angel fruit cake lol
your both doing wiring
but yours is less confusing than nutty sarah's lol
Yasss🙌 you didn't even scratch the car😅 you and Sarah are beasts with these makeovers ❤ Sarah N Tuned needs to be placed on your car💞
Congrats on 10K!