@@pajajaska screenshot of all settings will be enough I bought sab 72150 to mxus 3k turbo 4t and want to see safety settings for this Do you use a ferrofluid or any liquid for mxus?
@@itschico 1drv.ms/f/s!AkyEeNZrUhIEgVqKKHpfMc_ZkDXz?e=hhmhr1 Remembert that you need to run the hall test if you havent already. Dont copy the throttle settings if you dont have same throttle as me (domino potentiometer throttle) for hall throttle those need to set differently. And also dont copy the battery voltage settings because you probably have different voltage battery. If you need more speed enable the flux weakening
At the moment I dont have ferrofluid. I have only heatsinks, but those dont do much without ferrofluid. I dont have problems with overheating so I dont need ferrofluid.
@@Uwe342 its 4t motor. At first I had 5t motor but i changed the stator to 4t because top speed was too low. With 4t the Top speed is around 65kmh with 23s 82.8v battery and without field weakening. With field weakening its around 80kmh
@@Uwe342 yea thats not very much, but its enough for me. I like the torque more than top speed. With 3t and 26 inch wheel I could get faster. This bike power wheelie even from 40kmh :D
Nice, the perfect Citybike
Hi, where do you bought mxus motor? Alibaba?
Hi, i bought it here nexun.pl/en/products/electric-motor-for-bike-mxus-45h-v3-3k-turbo-3000w-4t-16x4-rear-414.html
Can you share your settings for sabvoton?
Yea I can send you a screenhots of my all settings. Or do you need some specific setting value?
@@pajajaska screenshot of all settings will be enough
I bought sab 72150 to mxus 3k turbo 4t and want to see safety settings for this
Do you use a ferrofluid or any liquid for mxus?
@@itschico 1drv.ms/f/s!AkyEeNZrUhIEgVqKKHpfMc_ZkDXz?e=hhmhr1
Remembert that you need to run the hall test if you havent already. Dont copy the throttle settings if you dont have same throttle as me (domino potentiometer throttle) for hall throttle those need to set differently. And also dont copy the battery voltage settings because you probably have different voltage battery. If you need more speed enable the flux weakening
@@pajajaska
I know
i have 20s
I need also check throttle because i have error 30h
On ml7280 and svmc72150
At the moment I dont have ferrofluid. I have only heatsinks, but those dont do much without ferrofluid. I dont have problems with overheating so I dont need ferrofluid.
you have 26 Inch ?
24 inch
@@pajajaska ok and what turn is your Motor ? And what is your top speed ?
@@Uwe342 its 4t motor. At first I had 5t motor but i changed the stator to 4t because top speed was too low. With 4t the Top speed is around 65kmh with 23s 82.8v battery and without field weakening. With field weakening its around 80kmh
@@pajajaska ok that’s not much for 23s , but that’s the reality , because many people talk shit like they can do 95 mph with 5t and 72v 😂
@@Uwe342 yea thats not very much, but its enough for me. I like the torque more than top speed. With 3t and 26 inch wheel I could get faster. This bike power wheelie even from 40kmh :D