+500 fps Homemade Airbow - All parts from amazon!
Vložit
- čas přidán 29. 12. 2017
- Achtung, die Rechtslage hat sich lange nach der Veröffentlichung dieses Videos geändert. Pfeilabschussgeräte benötigen nun eine behördliche Erlaubnis. Diese Waffen werden in Deutschland deshalb nicht mehr angeboten und ein Selbstbau ohne Erlaubnis wäre illegal.
Attention: Check your local laws and make sure this is legal where you live BEFORE you consider following this tutorial. Always follow safety rules.
--------------------------------------------------------------------------
Plans:
drive.google.com/open?id=1qkF...
Clamps: drive.google.com/open?id=1_sO...
Part list amazon Germany: drive.google.com/open?id=1eK4...
US and UK links: Due to the low interest in this video, I have decided not to compile these lists. I suggest you use the German list as a start and search for the parts yourself.
---------------------------------
This is a full tutorial that teaches you how to make one of these awesome, but expensive airbows at home, from simple parts you can order from amazon.
While the homemade weapon can not come close to the ease of use and super cool design of the great FXAirguns products, it does outperform each and every commercially available crossbow or airbow we have ever seen.
Good luck making your own!
A "The Slingshot Channel" production. - Věda a technologie
Here in the states he’s what we’d call a “MacGyver.” Ohhh and I don’t believe there’s a single person who thinks Jöerg lies... He is a very forward, transparent person with a brilliant mind.
Jörg or Joerg ;)
@@stayloyal7988 Oops🤣
@@stayloyal7988 Joerg if you haven't got German keyboard enabled. :)
Macgyver turns a lawnmower into a tank. Yes you are right 🔥🤙🏻🤣
In Germany we would call him like that too:) The series was popular here too.
Joerg has simultaneously one of the most fun and educational channels in the weapons community. It's a crime that youtube even thinks about demonetizing his channel.
I concur and this is the first vid I've seen
His deep German laugh makes these awesome videos twice as good
Yes, reminds me of the Disney cartoon and the jolly laugh Santa Claus lets out in his workshop.
How can somebody laugh in a language 😂
@@BB-ck6kl
In an accent its true, and true too is animals in different countrys have different accents, sounds unlikely but it's a fact.
1000 points for honesty! "Please don't demonetize this video I need the money." Raw honesty I can't even begin to tell you how much I appreciate that.
Been watching this dudes videos for over an hour now, don’t know how I got here but I love it
Freaking badass My friend! Wish you all the best for 2018 :)
Adam Celadin I subbed you I love your videos as well
Adam can you try to throw a serrated chackram?
I'm glad I saw your post, I dig your videos, you got another subscriber. Keep up the good work! :)
Yeah great job joerg and also you Adam keep it up!!!!
This is honestly the best CZcamsr ever
This video never gets old. I come back to it time and time again. And there's no reason for anybody to think you're lying, Drake video
Mr. Sprave, I have been watching your channel for 5 years+. I do have to say you look so fit! I'm not sure what you have been doing but you look great. I'm happy for you and thank you for still making worthy content despite CZcamss never ending BS. Cheers you legend.
Great to see how you took the time to explain this in detail to the viewers. Not just the 'how' but also the very important 'why' was covered. Great work Joerg! :)
Great work. 👍🏻👍🏻👍🏻
Wtf no ha ha ha and one last shot for the viewers . thunk . Ha ha ha and one more ha ha .
"It would not go BOOM, it would go pfft." Lol. I love Jorge Sprave.
I’m from the USA and I watch a lot of your vids. Love the stuff you do and I hope to try some of these builds.
Jörg, ich finde es beeindruckend, dass Du trotz Deiner aufwendigen Projekte und Videos, es noch schaffst „nebenbei“ so ein tolles Business zu betreiben. 👍🏻
Schön, wenn der Chef das beste Aushängeschild für seinen eigenen „Laden“ ist. 😀
P.S.: Warum kann ich hier nicht zwei Daumen nach oben geben? 😄
1 bar = 1 atmosphere 1 atmosphere is about 14.7 psi
760 torr
Ok that is a rediculous amount of pressure I might also suggest a rubber tip gasket or washer on the front of the 7mm tube but awesome build. Buy an air compressor that pump will kill you before you get to kill anything with an arrow lol
@@kevinlewis9151 250 bar is ~ 3625psi. A regular air compressor usually maxes out at 150 psi. Most compressors are designed for high flow vs pressure.
There are high pressure compressors that can compress to 3625 psi, but they are very expensive and large. I know when I was volunteer firefighter the rescue truck had a built in high pressure compressor to fill the air tanks. It was over 20k, and it still took 5-10 minutes to fill the tanks to 3k psi.
@@rileyfenley522 yep a regular ait compressor would probably explode lol but there is a guy on CZcams that uses a couple refrigerator air compressors back to back to get some serious psi
@@rileyfenley522 its a hydraulic cylinder used to pump a piston. thats why they are so slow.
the entertainment value you bring your viewers is off the charts my friend
I'm loving you music choices🤘. Just Jamin while I watch this epic bow/gun combo.
Awesome video! Glad I found you on here. Excellently explained and easy to follow right along. Thank you
Man everytime george shoots something he has such a jolly laugh makes my day good job man keep it up
Lol @ calling him George. I hope that was a joke
@@a_real_jive_turkey7772 IKR !!!
Watching Joerg now I can imagine him as a 10 y.o. kid talking his neighborhood buddies into some sticky situations hahaha.
I LOVE his laugh makes me giggle every time!! im the same way when i shoot something too!!
Es verdad, cada vez que dispara algo, rie con mucho gozo y es algo que contagia... Jajajajajajajajaja
Ads really like to avoid this channel
Potato, Potato There was two ads for me
I have CZcams Red, so Jörg gets some money every time I watch his videos and I never get ads!
yeah but the channel makes ads themself a lot.
Yeah, he gets like 0.03 cents from you. Not even joking. If you want to support him, donate to patron to give him at least an entire cent, then use Adblock to gain the Red experience. Same perks, but he gets a REAL ammount of money and if we can get him up to 3K per month he can finaly get a good camera thus we get better videos :3
@Meep Changeling What ever happened to his 1k goal of a full metal repeating crossbow? I was most excited for that but then it disappeared?
Just awesome! You and the build! 😄 Thank you! I needed to hear your laugh today, too.
This was epic. I enjoyed watching you build yours.
This is one of the best channels on CZcams. And your laugh warms my heart! :)
Fantastic! You out perform yourself with each new build. I'm fascinated with your talent.
Another amazing video thank you great job as always you’re an artist with a pneumatic understandings as well as German rubber
Much appreciate the clear instructions and assembly from off-the-shelf parts. This latter is a real bonus for such as I, who do not possess a metal-turning lathe, milling machine, and machining skills.
The design might lend itself to being made, for eminently practical ends, by country folk in lower income countries.
An obvious need - to which you, Joerg, allude - is the fitting of a pressure reservoir connected, via a constant-pressure valve, to the air-cylinder ("plenum").
Tod of 'Tod's Workshop' mentions how crossbows were sometimes used during the fighting in Sarajevo because of the greater penetration of their bolts relative to that achieved by assault rifles. Useful when taking out largely concealed snipers. With the aid of an American colleague he demonstrates the truth of this.
One problem with bolts and arrows may be the cost of buying them or the time involved in making them. Especially when used in the wild, for hunting, with frequent losses.
Have you considered developing a hybrid model,capable of shooting - whichever seemed the more appropriate in the circumstances - either an arrow or a lead slug ?
What would be the most suitable calibre to make clean kills on medium-sized game, such as wild pig or deer ? - without unduly wasting that precious substance compressed air.
I was thinking maybe something in the range of .30" to .375", or 7.5 to 9 mm.
It seems to me that a major problem in re-designing for the use of lead slugs, avoiding machining, could be the making of an air-tight breech for rapid reloading. Muzzle loading would be slow and tedious.
And then, how accurate would be a slug fired from a smmoth bore out to, say, 100 metres ?
Could one obtain a rifling button able to form the wide, shallow grooves, leaving very narrow lands, suited to airgun barrels ? On special order from China ?
Sorry ! Many questions, from a novice trying to learn more. Am not expecting they will all be answered.
I thought that you were great
Joerg you are a master of your craft.
Don't ever stop your videos. Your videos can always pick me up if I'm down, always entertaining dude.
👍👍
2:17 That hearty laugh....it never gets old! We love ya, Joerg!!
Ray here, your program is the best. I am always excited when you say" let me show you it's features. People in the U.S.Are all saying that. I bought a car last week. And the first thing the salesman said." Let me show you it's features.
Wow, I just bumped into this guy again after about two years of not watching, and to see he’s up to almost 3million viewers is amazing. He has the staying power that’s needed to succeed in this game. Good for him! People love seeing someone persevere. That air crossbow sounds like just the thing for silent night operations. Very little sound for hunting.
its illegal since 2019 german law change
This is badass as always, man. Definitely love your content, and I wish CZcams and Germany officials would just leave you alone. I wish you all the best of luck. Much love.
I love this guy lol he makes the stuff we always sit and think about that we never have time to actually make
you certainly give a more humanized look into the flaws and pitfalls of design and construction of prototypes.
your honesty showing your development hick ups is refreshing and greatly appreciated. 😎👍
You're very talented.. Always impressed with your creativity and mechanical skills.
Boahh das ist echt harter Stoff Jörg! Echt geil!
yea...what he said !!!
"It will not go boom... it will go fffffff"
Made me laugh.
The best engineers always endeavour for elegant simplicity. As an engineer of forty years experience, you never fail to impress sir!
Pipefitter here. This kind of stuff makes me geek right out. Joerg your videos give me so many ideas. Thank you, big guy. So glad I came across your channel
I already see the titles on the "Daily Mail" lololol
you mean the daily fool...rofl, lol, lmao
Grappolidipalma "German Terrorist supporter shows how to craft dangerous air-powered mass murder weapon out of simple cheap amazon goodies"😂
Marcus Flierl "German Terrorist supporter shows how to craft dangerous air-powered mass murder weapon (especially tuned to target innocent Christian children) out of simple cheap amazon goodies...
...Straight out of the Alinsky manual
Marcus Flierl .... based on a weapon which has been arround for centuries . Rofl
No its the daily fail
I would use a 1/4" or 9/32" by 1/2" compression fitting and matching tube size to hold the tubing the arrow slides over. The larger size is about 7. 14 mm and might still slide into the bolt shaft. An electrically operated selinoid might be nice too.
You are a continuing inspiration and a treasure of humanity. Thank you
INCREDIBLE !!! You are extremely talented and this channel is full of great information. Thank-you very much for sharing your knowledge with us. Its awsome to learn about these things, I just wish I could have seen this ten years ago !! Lol thanks again and take care
So glad I'm early enough to watch this vid before it gets taken down wrongly by youtube's unbiased staff and effective algorithm
(hope it doesn't, though)
if only they were unbiased, but i get what you meant.
behemuth it was sarcasm
well, you should not have written "wrongly" if you wanted it to be read as sarcasm.
behemuth that wasn’t the sarcastic part and I didn’t even comment that it was just obvious that it was sarcastic
It hasn‘t been taken down.
This is really entertaining... should do a build vid for all your projects... at least the complex ones!
My gosh, Joerg, you are a true genuis! I am in awe of your immense capabilities, sir.
i have downloaded the plans and parts out of pure curiosity before i check out regulations in australia regarding these. i will say i am amazed just looking at it in the video just how compact this is and easy it can be to build with practice and patience.
regulations don't apply if it's a God-given right like owning a weapon is.
I don't know what to say! This has been the most enjoyable 37:57 minutes spent in a long time.
"After fifty strokes" you probably feel like you're having one, lol
Mmmm don't think so lol
@@antonygutierrez1817 I
You made me laugh haha ;)
I'm glad people enjoy his laugh as much as I do. It seems so genuine and it's so nice to see someone just have some plain fun doin what they love
LOLLLLL
Awesome vid,man!
I have one tip from a friend of mine (a knife maker) regarding the stabilization of the wood (and other porous materials). You need a cheap and small vaccum chamber and the pump. You need to put the part in to stabilizing liquid (Need more details here. I'm guessing the mixture was epoxy-based) in the chamber and start pumping out the air. The negative pressure should pull all the air from the part and it should be replaced with stabilizing agent.
The main benefit is getting a material that looks like generic wood,but is hard AF. I think it might also have some uses outside of making weatherproof knife handles?
Cheers from PL!
we love your show and we especially like your laugh don't ever stop
You make it look easy, but i know it's not. Amazing tutorial! Really like it👍👍👍
It's more time consuming than hard.
Hard ? Yes ; but FUN. !!😎
Dude you’re a legend, greetings from Los Angeles. This afternoon I heard someone programmed your laugh as his android ringtone. Respect
What a genius you are. This is simply brilliant. I marvel at your craft. Thank you for sharing and also for your gentle but most informative explanations. Blessings 💖
I can see the Daily Mail headlines now....
I just love his crazy laugh when he shoots something
This would be a good project for a little kid here in the US. We used to make our own little .22 pipe zip guns when I was a kid. Fun video. I am binge watching the content and really enjoying the channel.
That is a pretty neat pipe wrench. I'm in the US and have never seen that one like that. Good job on the video.
Damn, this is awesome. You get the fun of shooting AND some cardio before every shot when doing it with muscle operated pumps. Amazing :)
Between 250 and 300 bar, it is no longer cardio training really :)
Yeah it kinda looked like a pure hypertrophy Triceps Pushdown :D
Schöne Grüße aus dem Nordmünsterland und einen guten Rutsch dir und deinen Lieben^^
joerg you should be a weapon designer for post apocalyptic scenarios man, this thing would fit perfectly in say a fallout game or a metro game or a movie in a similair setting
I have only just found your channel, this is totally cool, hope you keep up these awesome videos. Thanks.
Your talent and skills never cease to amaze.
Joerg,you have a great personality .If you ever stop doing youtube you could become a TV presenter.
Here here
You should get Time magazine’s sexiest man of the year award!
I love this stuff, great idea.. I've made several air pressure powered projectile launching devices... Started out using ball valves like this but switched to irrigation solenoid with battery and push button switch to release the pressure more quickly... I would like to see what you might come up with for a trigger mechanism to make this a bit more practical and efficient valve system.. 👍👍
Hi, I thought a solenoid would be a better idea too, do you have a link to the irrigation version you used?
@@uncobazz3848 any inline plastic irrigation valve will work. They're available in different sizes to suit your project needs. To use a battery(9V) you'll have to change out the AC solenoid for a DC solenoid and use a momentary switch(trigger) in combination with a SPDT switch to open(fire)/close(fill air) the valve.
The same valve can be opened by changing the pressure difference on one side of the diaphragm than the other in the valve. It works just as fast with only one part(shop air blower valve) to go wrong. Anyway there's plenty of videos on CZcams to do this.
Been watching you for 3 years and love everything you do THANK YOU
Well, the demonetization bots will probably be fine with it as long as you don't paint it bla-
32:22
*DEMONETIZED*
Hilarious.
CZcams bots are racist
Sehr cool :)
This is so so cool, I can't even UGH I wish this sort of stuff was legal in Australia I would save up for all the parts and make it a project.
You inspire me to build a lot of crazy things. Love what you do.
Thank you, very much Fritz! Wonderful work!
I would like to see your projectiles effects upon meat.
Ich glaube ich lade das Video gleich Mal runter, bevor CZcams es entfernt.
Super Arbeit Jörg! Du machst immer super Content!
Viele Grüße aus Nürnberg
TheFlyingRaven Welches Programm benutzt du dafür?
mann kann die URL im JDownloader eingeben zum Beispiel. (achtung, diverse Installer dafür wollen dir werbeware andrehen)
Hedonismusbot danke
JDownloader ist super, genau. Benutze ich selbst auch. Ansonsten kann man auch im Notfall via einer Google-Suche ("Download CZcams Video Online") eine der diversen Webseiten für das herunterladen nehmen. Praktisch wenn man mal an 'nem anderen Rechner oder am Tablet sitzt.
gäb auch noch Browser Addons (Chrome, Firefox) die einfach einen Download button zur CZcams seite hinzufügen.
Find jdownloader persönlich aber auch am besten.
I wish you had more vids of your build process it’s fascinating to watch. You clearly have a lot of engineering experience and now use it for whatever you want. Truly a dream
I concur.
When you first demonstrated how the front valve would release the air-charge, I thought "Damn, a shame it couldn't be opened more quickly, for a quicker energy transfer." I should have known you'd figure out a way to do it!! Also, to attach the barrel, couldn't you work a flange into one end of the barrel and then put that adapter piece over the other end, slide it down to the flange and THEN use the epoxy to complete the seal? That way it could NOT fit back out of the hole you'd drilled.
Awesome rifle! I just may try and make one here. I live in a country that is VERY prohibitive on air-rifles, but something like this would come in handy. Thanks for making and sharing such great vids!
It must feel good to know you have friends all over the world! ;)
Thousands of CZcams videos and yours is my absolute favorite! Thank you sir. I would really like to see a slingshot that is band or spring powered that compresses air and launches a projectile. Your fan, Dustin in Atlanta, Ga
Me too, my old fashioned 40 pound plus is getting hard on my wrists at my age. However; it still drives a .50 caliber ball bearing through 1/2" plywood at 20 yards. Hate to be the idiot that breaks into the house in the middle of the night, I keep both weapon and ammo close to the bed, and the ammo is rusty and a bit greasy. Why clean it up? Have been warned by the local LEO not to do head shots if forced to shoot, because of the mess it would cause. LOL
Hi joerg. Have you tried a home made hammer driven air release valve? While i appreciate the simplicity of a ball valve, and comprehend the differences of pressure build in the bolts body that facilitates its launch i think you could easily add an external compressed air canister and be able to achieve multiple shot capability without pumping every shot. With the hammer valve you could even convert between ball ammo and bolts or have an over under. I'm designing a multi barrel but the air cans don't last long enough. I fire marbles, I need a larger air supply. Portability isn't really there mine is more viable mounted on a fire truck i think.
He can be the friendliest at the same time most dangerous man you could ever meet and that's awesome!
The world needs more people like you sir bringing ideas from outside the box as yourself does Nice CRAFTSMANSHIP I KNOW NICE HUNTING GEAR I’m from Canada just keep on keeping on LOVE THAT ONE THERE 🎯
A bit early to say this, Happy New Year guys!
Don't say it early! It's bad luck.
Gilead Maerlyn its not early, here in Australia it is already new years day!
When Croz said it, it was the December 30th, check the date.
Gilead Maerlyn also superstition is fake
This thing does not even look homemade 😂
it does, it just looks well made rather than like a prototype or intentionally post-apocalyptic.
jemielnic Dont know but he made a Gewinnspiel (dont know the english word, use the Google translator XD ) with the Ikea pencil pistol when he published his mobilegame.
God Zapp
A true craftsman...!
Well it's amazing what a paint job can do makes something look brand new and Factory made.
God Zapp giveaway
Hallo Jörg, das Video macht mächtig Spaß und man bekommt richtig Bock zu schießen. Vielen Dank alter. Gruß Olaf
We're still fighting the good fight to keep firearms legal here in America but units like this have their place for sure . Thank you for this !
They can make them illegal and ill bury mine or they can try and take them, but itll be over my dead body. Im not a beta thats gonna give my guns away no matter what government bodies say or do.
It's your laugh, if the devil himself laughed it would sound like you. You are amazing with amazing ideas. Remember that ordering the parts individually is legal however combining them is the actual illegal part.
Best content on youtube my guy!
Ok. I'm not going to pick on you for all the mistakes and wrong information you gave about your wrenches and the teflon tape, but instead I'll just say, you did a great job and made something very useful for the common person. Well done.
I really enjoy how your mind works. Genius. That thing's a beast!
Great video , if I can make a suggestion , flair the end of the aluminum Rod ,like doing brake work
Then it won't fit inside the arrow.
Your laugh is the best
Just the right amount of laughing too.
Too much can sound a little forced.
I just found this channel. These videos are great! Very clever stuff.
"i need the money" lmaooo you got a sub and a like for that
straight to the point, simple, and honest
Absolutely amazing video!
That was amazing to see behind the scenes of the Slingshot Channel !! Even more badass than I thought ;)
Aloha Jeorg! Haven’t watched your channel in a while but as usual, another brilliant masterpiece! you sure are interesting and intelligent in your designs! I hope you are able to prosper greatly by capturing a little corner of the market (if not more)with one of your creations….guard your most unique ideas until you get some sort of “patent” and get it from pen to paper to production or someone will steal it for profit. I know you already know this but I would like to see you profit than someone else from your designs. Mahalo nui loa for sharing your time and skill with the world! Aloha Braddah! PM me if you ever decide to visit Oahu, Hawaii…. I will be your personal local tour guide!
Wonderfully done video from start to finish. Very handsome badass gun!
Pretty cool build. I don't think the Teflon tape does any "sealing." It is more of a lubricant for the threads to tighten down farther without becoming damaged. Those threads are tapered and become sealed by tightening down metal to metal. Keep up the cool videos!
Anyone making this in the UK please be aware it cuts very close to the bone. While it may not be illegal, that might be because it happens to fit a form that's not easily addressed by existing laws. Do some research, call your local police station's firearms team and check. Get your on information, do not rely on anybody else or on word of mouth. You do NOT want to be the poor sod that becomes the test case for airbows and ends up with a conviction for possession of a section one firearm without a licence.
If I was going to do this I'd at least ensure that the end of the barrel is blocked so that it cannot be muzzle loaded with anything at all, and add some air holes along the side of the barrel so that it's clearly launching from a spigot and not a barrel. Jorg is doing some great work, and we don't want to cause him any trouble with reckless behaviour!
I think you'll find under UK law, this will be considered a firearm, as it is a 'lethal barrelled weapon, of any description from which any shot, bullet or other MISSILE can be discharged' (section 57 (1) Firearms Act 1968) - case law hasn't determined if the missile has to discharged from inside or outside the barrel. It won't be considered an air weapon, as it's over 12ftlbs, and it isn't a bow or crossbow as it has no limb or prod. Another consideration is s5 of the firearms act, stating any weapon, of whatever description designed or adapted for the discharge of any noxious liquid, gas or OTHER THING - Just saying, if you build this in the UK, you may just become case law, and get a conviction, probably go to HMP!
You can make this big peashooter in Essex no problem, if you make it in Sussex....
@@shootingGBS You can buy modified ones in the UK, I don't think I'd be able to link it on here but they have a specially modified spigot.
Absolutely awesome 🤩, I have downloaded info + parts list but it’s all in German, I will have to try and convert to English.
Great video and awesome detail, love it 👍👍👍
Thanks 🙏🏻.
Yes I want one of those! matter of fact I want one of everything you own, love your channel, would not miss your Creative genius, I told my friends about your clever creations!. from San Diego California keep the good work up you’re A very clever person love watching your show!🤙
If you want to ensure the most stable of wooden pieces, I would suggest you immerse the pieces of wood into a small bowl filled partially with a slow cure resin, and put them through several cycles of vacuum treatment, which will allow the resin to permeate the wood, and then placed in a warm environment to cure. then those pieces of Plywood will be extremely tough.
Won't this make them too rigid for this purpose?
I believe what Joerg meant by "stabilization," was drilling pilot holes and counter-sinking. Me mentioned them in the context of the plywood prying apart from the screws.
Every time I come back to this video, I think it's awesome... I've decided I think I'm going to finally build one of these this year or early next year with some of my own tweaks
I really like the way you explain and you have a very pleasing accent.
thank you
Hallo, Wunderschöne Arbeit und danke für die Teileliste.
Schönes Wochenende