HOW TO FIX , MTD YARD MACHINES TILLER, Wont start. 139 cc OHV engine Won't RUN, Carburetor PROBLEMS
Vložit
- čas přidán 22. 08. 2024
- HOW TO FIX and Repair a MTD YARD MACHINES TILLER , Rototiller , Cultivator. 139 cc OHV engine Won't RUN , Will Not Start after STORAGE . MTD Powermore ? Honda Kohler CLONE .
Review: Is it a CRAP engine or NOT CRAP? make a motor run. Fuel delivery problems . Carburetor common PROBLEM. Procedure for Cleaning the Carb and fuel system. Check and TEST. Choke , Spark , Runs with Choke on only sometimes. Poor performance. Wont REV UP. best easiest way. Sam as pressure washer and Lawnmower with the same engine
Tutorial by Jeff's Little Engine Service
Music by my band BonzaiRod. song ~ Staging lane
Copyright 2019 Jeff's Little Engine Service
Donations help me make more videos, thanks for watching!
Donations can be made by clicking on the link below
www.paypal.com...
PLEASE KEEP IN MIND when you are watching my videos: I am showing you the least expensive, quickest "backyard" methods for repairing or servicing your lawnmower. Replacing all components such as gaskets and fuel lines is always recommended when rebuilding or repairing equipment. With these videos I hope you are able to fix and repair your lawnmower yourself with minimal parts, knowledge and tools. Thank you for watching!
Just popped in to say thank you for the carb break down video. Tore my mowers carb apart. Cleaned the main and low speed jets. Put it back together and no go. Didnt know about the piece that comes out under the main, that was the issue. Took it back apart, cleaned that. Started right away. Subbed and 👍🍻
nice work!
I have a mower with this engine I've had zero issues. Cable choke works great and every time I've needed it over the years it has never let me down. However my very old CraftsmanII mower model# 917.37230 thinks it's brand new, fresh out of the box and continues to start on the first pull every time, every year. It's the first mower I ever fixed cleaned out the carburetor and I haven't needed to do it again just like the MTD mower. Take care of your machine and it'll take care of you no need to feel sorry for the 139cc MTD mower or the Tecumseh owners, maintenance is key and knowing how to store your machines just as important. Yes, I have Honda mowers and Husqvarna that have been great I have a 1950 mower that's great. I love all my mowers and take care of them, I enjoy it.
That's fantastic and thank you for reminding me why I will never, even attempt to clean my carburetor on anything I own. Plus when the small engine repair dude tells me he he has to charge an hour and a half for labor I'm going to tell him why, Jeff did it in 28 minutes! I just watched it! Thank you sir for the awesome video.
LOL Thank you for watching!
Second year I used his video and the second time it worked like a charm thank you.
That is awesome! LOL thanks for watching
I’m glad you showed the problems you ran into and how you got through them. We all run into these things when we try to do it, but few videos show the problems.
Thank you for this video. My father in law and I had been struggling for a week to get our tiller started. We followed this video and as we put it back together we said we were going to burn the thing if it didn't start. When we pulled the cord and it fired, the joy was ecstatic. Thank you!
Good job, thanks for watching
Great video. Easy to follow. After draining gas, new spark plug, I had to tackle the carburetor. Followed vid. Started first pull.
Glad it helped
Fixed it with your help, cleaned all the spots, started from first row :) Thank you !
Glad it helped!
Thank you for the great instructions. I did my lawn mover this morning and it now starts on the first pull. This was the model with auto choke so the choke and gas linkages were slightly different and a bit more cumbersome to get off but all in all worked the same
Now Im ready to tackle that carb on my tiller,so glad you put out a very informative video,it will help me forsure!
Glad it helped
Jeff what and excellent video, thank you a million times! I have an MTD engine same as in your video I replaced the carburetor and still it would start and stall out or run on full choke! Worked on it today same thing. Watched your video and found out I was putting the filter housing gasket behind the carb on the engine side...and that was my problem! Thanks again!!!!
Me too. Those gaskets are confusing. Except now it starts easier but runs very rough. I’m afraid I ruined it.
Update: I re-cleaned the carburetor in gasoline with an ultrasonic cleaner and it works fine. Thanks for the awesome video!
Nice job, clear filming and instruction. No superfluous jabber!! Super!
the emulsion tube above the jet . I didn't know how to get out thank you so much for the video thumbs up
Glad I could help
You're a good teacher. Keep the vids coming
Thanks friend
How do u install belt on this tiller
Thank you. I'm just about to attempt this on an MTD T245 that's been parked for about 5 years. I feel brave enough to give it a go now.
Beautiful tutorial
Thank you! Cheers!
Very helpful video. My MTD tiller which always used to start first time(until I left it standing a couple of years with fuel in - duh) once again starts first pull. Many thanks!
Great video! Now I’ll get to work on the Yard Machines tiller and snow blower then do the Troy Built string trimmer I just bought.
Good work Jeff: I have customers that every year bring their mowers, tillers, etc. to me for similar issues. I keep telling them to use non ethanol fuel but they won't pay the extra cost of the gas. One lady only idles her riding mower and won't run up the rpm's. Fouls the plug and she can't understand the splash oiling system and that she is doing more harm to idle the engine while trying to cut grass. Gets frustrating. Thanks for the video's.
Lol! Customers can be ridiculous sometimes!
Very enjoyable and interesting video. I wish my grass was green
rosepierre2
Carbs get dirty because of fuel issues. Don't be dismissing a complete line of engines because of a fuel problem. My MTD lawnmower with a similar engine has run perfectly for 7 years now. I make sure to drain the gas in the fall and just do regular maintenance.
Thank You so much !!! Great Video
Drain the gas in the fall and run the engine dry. Most of this is avoidable. Still, really good video
I HAVE A LARGER YARD MACHINE TILLER, AND IT IS THE BEST TILLER I HAVE EVER HAD. I DO NO MAINTENANCE ON IT OUTSIDE OF OIL CHANGE AND IT STARTS ON THE FIRST OR SECOND PULL EVERY TIME.
Good job...love the carb cleaning videos
Bang on mate good fix and well showed for information
Thank you very much for your help. I saved a lot of money.
Saved me around 200$ Thanks!
another great fix.........thanks Jeff!!!
Thanks for watching!
Thanks for the education, Professor 👍
Nice Job
lol! Thanks for watching
Nice job.
exelent instrucion video
Thanks friend
There is nothing wrong with these engines. Change the oil often. And install an in-line filter to reduce carburetor issues. ^_^
I respect your opinion, I however think they are crap.
I also own one,have had it for well over 10 yrs only had to do one carb cleaning on it and that was almost 4 yrs ago now.Always starts 2 pulls.I even forgot to drain the gas from last season and it still fired up.All in all my experience with them has been very pleasant.Wish i could find another or maybe i just got lucky with a good one,not sure,lol.I just change the oil at the beginning of the season.Still doesn't burn oil and i use it for my lawn service so it sees a lot of use.I changed the oil just this week and when i checked it it was still at the full mark but my other lawnmower(briggs and stratton) was below the full mark.I was surprised when this motor actually outlasted its wheels which i just finished replacing.Until recently i had no idea what engine it was til i found the box and found out it was a powermore.To me kinda looked like a mix of a honda.Well this has been my experience with it,maybe i got a lucky one out of the bunch not sure but ill continue to maintain it for as long as it lasts!As always a great video Jeff,very informative!☺
It's a Kohler modeled after a Honda GCV engine. They're crap because of the linkage. For $16 just buy a new carburetor on Amazon, and always run the mower until it stalls at the end of the season, or use stabilizer fuel. Kohler's are the worst to work on and most finicky due to the tiny jets and ports.
Don't know if it will help but I use a wire from a wire brush to get into all the holes when cleaning a carb. Bit stiffer than a wire, or welding tip cleaners.
Excellent tutorial video man!!! A buddy of mine has that same tiller. I have to do the very same carb cleaning to his every year! POS carb!!!
Thanks for watching
Insert small paper clip up tube. Bend top when it pokes out.
Unfortunately i had one of these, it had a einhell branding on it and it has about a mix between this engine and a Honda OHV engine
Thanks loads, great job.
Great job! Bravo!
Thank you! Cheers!
Nice cleaning. I wanted to ask you about the differential lubrication i just add lubricant or how can i remove the old lubricant.. Thank you.
I am sorry I have not performed that procedure on this model. Some are not meant to be serviced.
I wonder if opening up the jet or whtever orifice gets gunked up the quickest might extend the time btwn carb cleanings.
Great Job.
Would you recommend Switching motor from harbor freight!? Which engine would be best ?
nah stick with Briggs and Stratton engines if possible
Do you have any video of servicing the belt tension? I just bought one of these used and I'm not sure if it's a belt or chain but I know that it's not tight enough because the time stops spinning up the dirt too tough
Great work Mr. Gary 🙋👍👍👍got mommas phone 😂😂😂
Hey Jeff I have a powermore 420cc on my 2016 yardmachines mower never had a problem out of it "knock on wood"
I have a yard machine with a tecumseh, very tough to find parts at a brick and mortar store.
Hey jeff,
I got a question for ya. I use my tiller once a year. Should I only fill the gas 1/4 full and after I'm done tilling just run it until its outta gas? Carb clogs with stale gas so just run it till its outta gas would be an easy solution right? Thanks man!
Yep, That is a good thing to do before storage
You were too kind in your review. I have a 140 cc that i used 4 times before it died. I clean the carb and now it runs great for 10 minutes then surges and dies. Has to cool down before i can mow for another 10 minutes.
Worst air filter i have ever seen.
I have the same tiller, i want to change the oil in the bottom gearbox, may i ask what kind of oil and how much need? normal 80w90 maybe?
USE NON ETHANOL CHEVRON 94 OCTANE FUEL OR SHELL 92 OCTANE, ALSO DO NOT LEAVE GAS IN YOUR CARBORATOR FOR MORE THAN 2 OR 3 WEEKS. DRAIN THAT CARB ONCE YOU ARE NOT USING IT.
good tip
What's the problem when this type of engine idles "up'n'down". The engine surges at idle speed, "hunts".
The slow speed jet inside the carburetor is most likely plugged
Jeff, when you gonna get a sonic cleaner to make your carb cleaning a little easier? NIce job.
I need one! I think I would love it
Can’t get carb off 2 bolts to work on carb
The metal rod with z hook on each side of choke won’t allow me to unhook carb
choke there
Should I remove it from other end ?
So undo 2 nuts on top part of lawnmower
Would that help?
I bought that same tiller off fb and the seller changed carbs when can I find the same exact carb that you just rebuilt
Hello I have MtD tiller that won’t start I’m looking for the carburetor and I can’t found it the number that shows is 05ccykr maybe u know where I can found it please.
what angle Nose Long Plier u r using?
super
it is kind of funny how you make it sound like they are shitty engines yet it starts first pull once you clean the carb. all carbed engines are prone to having the same issue if you leave gas with ethanol in the tank all winter or summer. at least it is not as bad as those newer briggs and stratton plastic carbs that once they clog they either need to be replaced or have the main jet drilled out. never really had much issue cleaning a honda style carb like the one on the machine in the video
QUESTION ? Help
I have exact engine but mine is push mower. I tried to replace the control cable and want to know if there is spring attached or not. I couldn’t find any diagram online. Any help would greatly be appreciated
That’s at powermore engine made in China and is a POS. My neighbor has one on a lawnmower I had to clean out the carb for him and it was ok after
Thanks for the info, I wasn't sure if it was a powermore
I have 1 just like that it has 25 psi and will not run at all any tips
i woud rather buy a new one but a cheap then i would fix it while i have the bad one
By the way you pulled on the cord, I assume you shouldn't have to pull very hard in general?
How come this machine is not set up so that it runs at full engine speed but only half speed????
you can adjust them a bit but too much rpms and the engine can fail if it revs too high
When people say this is a "Honda clone", what do they mean exactly? Is this reversed engineered?
it means it is a chinese manufactured replica of a Honda engine. They are CRAP!
Where the hell is gear lube plug on mtd yard machine front chain driven tiller
This engine started to smoke and run poorly. Any ideas?
could be a flooded carburetor allowing gas into your oil
Mine is Hurricane 4.1 hp