I'm a single mom and I was seriously annoyed about having to do this but it turned out to be super easy. I fixed my mower and I'm proud of myself!! Haha. Then fixed I the neighbor’s. (Thankfully they were the same.) 😂Double thanks!!
@@harrycallahan686haha. Maybe if you can fix my shower? Lol. That one is a little beyond a me and CZcams job. 🥴Oh, the joys of homeownership and adulthood. 😅
Friggen AMAZING! Worked like a charm!! Our local shop was a month out so I decided to give it a try. Changed the spark plug. Got old fuel out/ new in. Would sputter but wouldn’t start. Found this video and gave it a try. STARTED ON THE FIRST PULL!! THANK YOU!
My lawnmower hasn't been working since last fall, and I was very frustrated and decided to watch a repair video to see if I could fix it myself. I am glad I watched your video, it was very straight to the point filled with detail and instructions to the point that I was successful at fixing my 1 year problem thank you so much for allowing me to save money and time
Thank you! I cleaned out the carburetor with a sewing needle, cleaned out the gas tank and put in fresh gas, and fired it right up! I couldn't have done it without you.
Awesome! I searched high and low for a video to fix my lawn mower that I left gas in over the winter. While following your instruction, I noticed that the holes in the ejection system did not look clugged. As per your instructiin, I cleaned the out anyway. Low and behold it started after reassembly. Thank you!
I just did the same thing to a mower that was given to me and it worked. Thank You for uploading this video. Your step by step video made it easy to do. : )
Thanks Hyatt! Hope you're doing good too!! I'm not a huge fan of living in a neighborhood, but I've found ways to do the stuff I like to do here, and help people along the way.
I have been using a machine with a B&S 450 engine for 10 years, when I once started having carburetor problems I simply used premium gasoline, which in cars cleans the injectors, for three years I have been using it professionally. I add fuel stabilizer. No problem.
I've never worked on a plastic carb before and couldn't get this thing running after cleaning until I watched this. Runs perfect now minus the throttle wiggling a bit!!! Thanks for your help!!
Awesome clear and concise video. Great explanation and did the trick. Back up and running Fast. Sorry lawn repair shop but you take the loss and we win on this one.
Success! I knew i had to clean the carb but never did a plastic one so the step by step was super helpful! Just old fuel in the carb that didn't allow the engine to turn over. Thank you!!
I cleaned my carb as per this video carb cleaner and air compressor reassembled fresh gas ran like a Swiss watch cut my grass thanks for the video keep up the great work.
Thanks Kenny! I work on tons of small engines for my neighbors. In my neighborhood I've become the "go to guy" for this kind of thing. Wasn't really intentional... just kind of happened lol. I figure while working on some of them, I may as well share some knowledge of them on here as well.
@@TractorHoarders I kind of have the same reputation in my neighborhood, and at work.... "A jack of all trades is a master of none... But a jack of ALL trades is better than a master of ONE!"
Welders Tip cleaners. Welding supply, Aome Depot, Amazon. Thanks, I found one today 2017 model. It looks like it was used one time. The motor oil is clean as new.
Everything I did on my toro 675 series,, I consulted to all experts mechanics on CZcams,, but still won't start my lawn mower,,, perhaps I need to change my plastic carburetor,, I had checked spark plug,, compression,, timing,, gasoline all perfect,, many thanks bro...
Eduardo, I have a small engine repair playlist that has a few more of these. I'd say it's highly likely your issue is carburetor related. If this method doesn't work for you, check out my other videos. Best of luck!
I’m sorry, I have no knowledge in lawn mower repair, but bcs my new one doesn’t start, I ve watched a lot of videos and read every comment after each of them. In your case technicians and people who knows what they are talking about , say : try to clean carburetor one more time You can replace it as well, it’s my suggestion after all Thank you
Worked like a champ! 💯 percent satisfied. White crusty particles on the plastic tubes. Cleaned and reinstalled. Nothing beats the smell of lawn mower engines running in the morning. Any recommendation for fuel additives prior to storing in the winter?
Nice job!!! My recommendation would be to use a non-ethanol gas. I know you can’t get that everywhere, so if you can’t, just make sure to run the mower a few minutes every month in the off season, OR run it completely out of gas before storing it over the winter. STABIL is an additive that some people use, but I personally don’t.
I decided to replace the jet on mine with a newer design (before 2018 vs after 2018). Snapping the new jet into place was a MAJOR chore, there is no way you can just push it into place with your thumbs. Be warned, other than that it is a fairly easy process.
That was a great video but I have one question on the back of that plastic carb there is that little white thing that looks like a hose supposed to go on there and there is a little black nib on the back of the primer housing it also looks like a hose goes on there as well can you please tell me what they are for and if they stuck air
I have 4 mowers to work with. On a briggs and stratton pushmower it doesnt start. Clean new gas. I cleaned carburetor. I replaced a needle and seat. The floater doesnt lay flat, but its springy. Is that ok the floater isnt level cause of the needle and new seat ?
I have a Murray 500e 140cc Briggs & Stratton it will start then it will turn off would you recommend me doing the same thing to the carburetor as you did or purchase a new carb
Hey, i just got started fixing lawnmowers and I’ve already sold 4. I bought one for 40 but it’s missing the “blade control” cable. I got wires to connect it but i don’t know to what hole to connect it. Any chance you know which one it is?
Sorry, it’s difficult for me to envision without knowing the make and model. See if you can search your model # in Google for a parts diagram. That will likely show you the location.
Hey Hans, what spark plug does the Brigggs and Stratton use and gap size ? Can u show a video on how to pick and gap size the spart plug please thanks. U got a fan here in the SHOW ME STATE of ST. LOUIS MO.
Thanks buddy! I always enjoy driving through MO; it's a beautiful state. Briggs and Stratton part 692051 for the spark plug. Of course that can be cross referenced to other brands like Champion, Autolite, etc..
It’s possible there may have been some crud in the gas tank that got back into the carburetor and clogged a passage again. If thats the case, you may need to flush the gas tank, possibly replace the fuel line (if it’s deteriorating) and clean the carb again.
@@TractorHoarders That would be my luck lol I was able to start it back up, though it did stall out a few more times, but I got the job done. Next time I need to mow, if it still happens, I will try and your additional suggestion. Thanks so much for this awesome and very helpful video!!
I would recommend cleaning it again. Usually some passage needs cleaned a little better if it’s still doing that. It can be other things, like air leaks, too. It’s most likely an obstruction in the carburetor though.
If you disconnect the fuel line from the carburetor, does fuel run in a steady flow from the tank out of the hose? In the carburetor, the float could also be sticking causing the fuel to not flow. Or some other fuel obstruction. You know you have spark or else starter fluid wouldn’t work, so it’s definitely a fuel delivery issue.
Hellllpppp......I got it to start.....buy its leaking gas now.......is the linkage cable supposed to go in a certain way? I'm thinking now the float isn't wrking properly
Hi! If it’s leaking gas, you’re right, it could be the float valve or the rubber o-ring at the bottom of the bowl. The linkage cable should go in whatever hole it came out of. Sometimes you can tell because the hole has some slight wear to it. You’re on the right track… good luck!
To me that seems like a fuel problem. I would check and make sure there is a constant and steady fuel flow from the tank to the carburetor. If there is a fuel filter, you may change that. There could also still be a carburetor issue. I have some other videos in my Small Engine Repair playlist that go into further detail on that process.
PLEASE HELP!!! I did all of this down to the “T”, and now I have gas squirting out of that little white nozzle next to the fuel line and it’s squirting out of the damn Primer bubble??????????
Your float might be stuck? Re open it and confirm it opens and closes like it should. Worst case, you can buy a new carburetor off of Amazon for cheap.
If it’s starting, it means your ignition system is good and you have spark. Because it dies after starting, that means it’s not getting fuel and likely has a fuel restriction in the fuel line or carburetor.
I'm a single mom and I was seriously annoyed about having to do this but it turned out to be super easy. I fixed my mower and I'm proud of myself!! Haha. Then fixed I the neighbor’s. (Thankfully they were the same.) 😂Double thanks!!
That’s amazing and one of the best success stories I’ve heard yet. I am proud of you! Thanks for sharing your success!!
Ok glad to see ya got it. I didn’t wanna get it part and mess it up. I’m doing tomorrow
@@TractorHoarders
Wanna fix another one? lol.
@@harrycallahan686haha. Maybe if you can fix my shower? Lol. That one is a little beyond a me and CZcams job. 🥴Oh, the joys of homeownership and adulthood. 😅
Friggen AMAZING!
Worked like a charm!!
Our local shop was a month out so I decided to give it a try. Changed the spark plug. Got old fuel out/ new in. Would sputter but wouldn’t start. Found this video and gave it a try. STARTED ON THE FIRST PULL!!
THANK YOU!
Thanks for sharing your success!! Glad it worked for you too!
My lawnmower hasn't been working since last fall, and I was very frustrated and decided to watch a repair video to see if I could fix it myself. I am glad I watched your video, it was very straight to the point filled with detail and instructions to the point that I was successful at fixing my 1 year problem thank you so much for allowing me to save money and time
Thank you! I cleaned out the carburetor with a sewing needle, cleaned out the gas tank and put in fresh gas, and fired it right up! I couldn't have done it without you.
That’s great! I am happy it helped you too! Congrats and thanks for sharing your success!
Thank you for the video. I couldn’t start my mower for two years. Kept putting it off. Your video was the perfect pace and to the point. Thanks!!
Thank you! I’m glad it helped you out!
Awesome! I searched high and low for a video to fix my lawn mower that I left gas in over the winter. While following your instruction, I noticed that the holes in the ejection system did not look clugged. As per your instructiin, I cleaned the out anyway. Low and behold it started after reassembly.
Thank you!
That is awesome! So glad it worked for you too!
I just did the same thing to a mower that was given to me and it worked. Thank You for uploading this video. Your step by step video made it easy to do. : )
Great tutorial video, Hans! You made it look easy. That is nice of you to fix for your neighbor. Hope you’re doing well. 🇺🇸🚜👍
Thanks Hyatt! Hope you're doing good too!! I'm not a huge fan of living in a neighborhood, but I've found ways to do the stuff I like to do here, and help people along the way.
I have been using a machine with a B&S 450 engine for 10 years, when I once started having carburetor problems I simply used premium gasoline, which in cars cleans the injectors, for three years I have been using it professionally. I add fuel stabilizer. No problem.
I've never worked on a plastic carb before and couldn't get this thing running after cleaning until I watched this. Runs perfect now minus the throttle wiggling a bit!!! Thanks for your help!!
Awesome clear and concise video. Great explanation and did the trick. Back up and running Fast. Sorry lawn repair shop but you take the loss and we win on this one.
Way to go!! Good job! Glad it worked for you too!
Thank you, thank you....I confidently took apart my carburetor cleaned it, put it back together, and it runs like a charm. ❤❤
I love it!! Great job and thanks for sharing your success!! Easy peasy! 😁
Great video. Thankfully some people still don't want to mess with doing this, as easy as it is, and it keeps putting money in my pocket. 😂
Yes indeed! At first I wasn't a fan of these engines, but I've changed my mind and I love them now, haha
I followed his instructions. Got my mower back up and running. Great advice 👍.
Fantastic! It's really not that bad to do. Glad it worked for you too!
Success! I knew i had to clean the carb but never did a plastic one so the step by step was super helpful! Just old fuel in the carb that didn't allow the engine to turn over. Thank you!!
Awesome, glad to hear you got yours fixed!!
Mower running rough, tried this, nope. Replaced the carb (with $14 via Amazon), still running rough. It may be time to just cut it loose.....
You have link
Cleaned the carb as you described and it's running great now! Thank you!
Seriously, amazing tutorial! Worked like a charm for me!
I’m so glad to hear that! Thanks for sharing your success!
Very helpful. My husband was ready to take it to someone to have it worked on butI was able to clean the carburetor and get it working. Thank you.
Glad it helped!
I cleaned my carb as per this video carb cleaner and air compressor reassembled fresh gas ran like a Swiss watch cut my grass thanks for the video keep up the great work.
Thank you, and I’m glad it worked for you too!
Thanks my guy I was hating life cutting my moms grass and I went ahead and just performed this fix and puppy fired right up thanks my bro!
Awesome! Glad it helped you out too!
Every time I have to mess with those plastic carbs, I have a tendency to invent new cuss words.. lol..
Haha, I understand that. My first one I worked on really caught me off guard. After I figured them out, I prefer to work on these over any thing else!
So strange the carburetor is made of plastic. I guess plastic doesn't rust, though. Great little tutorial!!!!!
Thanks Kenny! I work on tons of small engines for my neighbors. In my neighborhood I've become the "go to guy" for this kind of thing. Wasn't really intentional... just kind of happened lol. I figure while working on some of them, I may as well share some knowledge of them on here as well.
@@TractorHoarders I kind of have the same reputation in my neighborhood, and at work.... "A jack of all trades is a master of none... But a jack of ALL trades is better than a master of ONE!"
Excellent! Followed your instructions & my lawnmower sounds like new! Roared up on the first pull...
Awesome! I’m glad it worked to get yours going again too!
Thanks man, i took mine apart, i spent all morning trying to fix mine. Ill give this a try in the am
Just watched your video , did what you did…..started on the first pull. Thank you !
Awesome video!!! Done it exactly as you said and my mower fired up first crank. Thank you man!!
Excellent!! Glad it helped you too!
You're the man, cleaned my car and started right away!
Sweet! Glad it worked for you too!
Thank you for this tutorial , tomorrows project 🤞, too much rain , my grass is out of control 😬and subscribed !
Best of luck! I have a very high percentage of success with this fix. It’s a common issue on these plastic carbs.
Welders Tip cleaners.
Welding supply, Aome Depot, Amazon.
Thanks, I found one today 2017 model.
It looks like it was used one time. The motor oil is clean as new.
Excellent tutorial. To ease installation of the carb, remove the engine cover (3 bolts) first. 👍
Good tip! Thank you!
Did what U recommended, worked like a champ! Thanks!
Thanks, solved motor issue following your clear guidelines, cheers 😊
Excellent, great work, and thanks for sharing your success!
Great video. Thank you very much. Saved my mower.
Everything I did on my toro 675 series,, I consulted to all experts mechanics on CZcams,, but still won't start my lawn mower,,, perhaps I need to change my plastic carburetor,, I had checked spark plug,, compression,, timing,, gasoline all perfect,, many thanks bro...
Eduardo, I have a small engine repair playlist that has a few more of these. I'd say it's highly likely your issue is carburetor related. If this method doesn't work for you, check out my other videos. Best of luck!
I’m sorry, I have no knowledge in lawn mower repair, but bcs my new one doesn’t start, I ve watched a lot of videos and read every comment after each of them.
In your case technicians and people who knows what they are talking about , say : try to clean carburetor one more time
You can replace it as well, it’s my suggestion after all
Thank you
On my Murray 22 inch 450 e, 4.50,
Two of the screws are 7 mm for the carburetor,
the other two screws for the carburetor are 8 mm
Worked like a champ! 💯 percent satisfied. White crusty particles on the plastic tubes. Cleaned and reinstalled. Nothing beats the smell of lawn mower engines running in the morning. Any recommendation for fuel additives prior to storing in the winter?
Nice job!!! My recommendation would be to use a non-ethanol gas. I know you can’t get that everywhere, so if you can’t, just make sure to run the mower a few minutes every month in the off season, OR run it completely out of gas before storing it over the winter. STABIL is an additive that some people use, but I personally don’t.
Worked perfectly fired up on the 3rd pull
Awesome!! Easy peasy!
Just wanted to say Thank you this was a very good video I was able to fix a Lawnmore i got off of offer up website.
That’s great to hear! I am glad you were able to use this to fix yours too!
I decided to replace the jet on mine with a newer design (before 2018 vs after 2018). Snapping the new jet into place was a MAJOR chore, there is no way you can just push it into place with your thumbs. Be warned, other than that it is a fairly easy process.
That was a great video but I have one question on the back of that plastic carb there is that little white thing that looks like a hose supposed to go on there and there is a little black nib on the back of the primer housing it also looks like a hose goes on there as well can you please tell me what they are for and if they stuck air
Thank you so much! It worked perfectely for me!
Awesome!
Hey man I js wanna say thank you so much i clean it and it turned right up thank you
Awesome! Glad it worked for you too!
It worked! Thanks for the great video
I didn't see you use any carb cleaner, on the plastic carb, although I saw a can of it in the video.
Very helpful! Thank you!
Excellent!
I have 4 mowers to work with. On a briggs and stratton pushmower it doesnt start. Clean new gas. I cleaned carburetor. I replaced a needle and seat. The floater doesnt lay flat, but its springy. Is that ok the floater isnt level cause of the needle and new seat ?
Very Helpful im trying mine to fix it up.
I’ve got a mower repair playlist that shows this process in a few different ways. Hope it helps get you going again!
I’m at my 3rd plastic carburetor they are the worst. Mower runs 2 min than chock again!
I just picked one up for $50 from the thrift store...if it doesn't start, I thank you in advance.
Can the floater be in 45 degree angle instead of flat even? I installed a needle and seat cause my carburetor was leaking gas underneath. carburetor
It works thank you!
Congratulations, looks wa easy for You. I wish You are closed to start mine.
It’s not too hard to do. I hope you can do it and get it fixed!
that's really helpful, thank you!
Glad it helped you too! Thanks!
Worked like a charm
Awesome! I love when people share that they followed the steps and it worked for them too! Always nice to save money with a simple fix!
Really great video! Future me thanks you!!! ~🙏
Did you ever used that gray spray can ?
I like your videos. Keep it up.
Thank you! Just trying to share knowledge!
Thank goodness all of my yard tools have metal carburetors. “They don’t make them like they used to.”
The first time I saw one of these, I was quite perplexed.
Thanks Man
I cleaned the card real good but she’s still running rough kinda will run high then low then sound weak but she’s running
Good work
Thank you! Cheers!
right on thanks
Glad it helped you too!
I have a Murray 500e 140cc Briggs & Stratton it will start then it will turn off would you recommend me doing the same thing to the carburetor as you did or purchase a new carb
I’d just try cleaning the existing carburetor and maybe blow out your fuel line to make sure it’s not restricted
I couldn’t get the cartridge to snap back in no matter what. It was facing correctly.
Yuhh that shit works fixed mine 👍🏾
Glad it worked for you too
Thank you for your video .Looks like I have to do that with wire brush thats the only thing i did not do.
Glad you found it helpful! If you run some wires through those holes, it should get it! I have had a lot of success with that, and I bet you will too!
Hey, i just got started fixing lawnmowers and I’ve already sold 4. I bought one for 40 but it’s missing the “blade control” cable. I got wires to connect it but i don’t know to what hole to connect it. Any chance you know which one it is?
Sorry, it’s difficult for me to envision without knowing the make and model. See if you can search your model # in Google for a parts diagram. That will likely show you the location.
Use a guitar string to clean those little holes in the carb 😊
Good advice
Solid.
Perfect
I did that and it didn't work for me so where did I go wrong
10mm we assume?
Are there some other things I should check prior to taking all that apart?
Try starting it on starter fluid. If it starts and runs a few seconds, you likely need to do follow the process in the video.
Thanks!!! You good I guees I learned.
Glad it helped you too!
Hey Hans, what spark plug does the Brigggs and Stratton use and gap size ? Can u show a video on how to pick and gap size the spart plug please thanks. U got a fan here in the SHOW ME STATE of ST. LOUIS MO.
Thanks buddy! I always enjoy driving through MO; it's a beautiful state. Briggs and Stratton part 692051 for the spark plug. Of course that can be cross referenced to other brands like Champion, Autolite, etc..
install brand carburetor, it runs for awhile than stop and a lot of smoke from the engine
I wish you were my neighbor, I’m having trouble fixing this thing.
I wish I could help you. I would if I could.
Awesome 👍🏽
Worked great to get it started back up, but after a little mowing, it won't stay running
It’s possible there may have been some crud in the gas tank that got back into the carburetor and clogged a passage again. If thats the case, you may need to flush the gas tank, possibly replace the fuel line (if it’s deteriorating) and clean the carb again.
@@TractorHoarders That would be my luck lol I was able to start it back up, though it did stall out a few more times, but I got the job done. Next time I need to mow, if it still happens, I will try and your additional suggestion. Thanks so much for this awesome and very helpful video!!
Hi Tractor Hoarders✋I have a same motor 550E. My motor do surging. I cleaned the carburater twice but still surging. What i need to do?
I would recommend cleaning it again. Usually some passage needs cleaned a little better if it’s still doing that. It can be other things, like air leaks, too. It’s most likely an obstruction in the carburetor though.
@@TractorHoarders All right, i will cleaning it again😊 Thx for idea.
I replaced my card but it still won’t start without starter fluid. Any advice?
If you disconnect the fuel line from the carburetor, does fuel run in a steady flow from the tank out of the hose? In the carburetor, the float could also be sticking causing the fuel to not flow. Or some other fuel obstruction. You know you have spark or else starter fluid wouldn’t work, so it’s definitely a fuel delivery issue.
Hellllpppp......I got it to start.....buy its leaking gas now.......is the linkage cable supposed to go in a certain way? I'm thinking now the float isn't wrking properly
Hi! If it’s leaking gas, you’re right, it could be the float valve or the rubber o-ring at the bottom of the bowl. The linkage cable should go in whatever hole it came out of. Sometimes you can tell because the hole has some slight wear to it. You’re on the right track… good luck!
Just ran thru these steps on my mower and it started up, but it feels weak and stalls after 4-5 min . Any ideas ?
To me that seems like a fuel problem. I would check and make sure there is a constant and steady fuel flow from the tank to the carburetor. If there is a fuel filter, you may change that. There could also still be a carburetor issue. I have some other videos in my Small Engine Repair playlist that go into further detail on that process.
Where are you located Are you in Atlanta Georgia
Colorado
PLEASE HELP!!! I did all of this down to the “T”, and now I have gas squirting out of that little white nozzle next to the fuel line and it’s squirting out of the damn Primer bubble??????????
Your float might be stuck? Re open it and confirm it opens and closes like it should. Worst case, you can buy a new carburetor off of Amazon for cheap.
💯
It’s already clean.
Oh yeah I will thank you
best of luck!
Nice….
I did everything I saw on the video, and it still doesn’t work… But great video!!
Use a piece of wire, not bristle from a brush...Lame. With the wire you can clean out further up in it.
And what is the total length needed? I’ve done about 25 of these. The answer is not very much. Put whatever you want in there.
It starts then dies
If it’s starting, it means your ignition system is good and you have spark. Because it dies after starting, that means it’s not getting fuel and likely has a fuel restriction in the fuel line or carburetor.
Garcia Karen Robinson Michael Williams Gary
I didn’t have any luck
If this did not work, but starter fluid makes it want to start, try again, or replace the carburetor.
tnks I to😂ok it apart every tng was good and started up tnks