MTD Tiller With Rusty Tank and Bad Carburetor
Vložit
- čas přidán 8. 09. 2024
- In today's video, I diagnose and fix an MTD rototiller that surges and won't start. This machine has multiple fuel system issues that I unfortunately see all to often with equipment that gets used very little.
The content in this video might not be applicable to your exact piece of equipment. Any damage or loss to persons or property that may result from use of information contained in this video is the sole responsibility of the user and not Brant Small Engine Repair.
Brant Small Engine Repair encourages the use of safe practices and safety equipment while working on your machines and therefore assumes no responsibility for personal injuries. The information contained in this video shall be used for informational purposes and used at viewers discretion.
On my channel. you will find repairs to many different makes and models of lawnmowers, trimmers, generators, rototillers, snow blowers, chainsaws, lawn tractors, pressure washers. If you're looking for repairs on Honda, MTD, Ariens, Husqvarna, Murray, Weedeater, Toro, Troy-bilt, Echo, Stihl, Craftsman, Mastercraft, Bolens, Brute, Firman, Generac, John Deere, Poulan Pro, Homelite, Canadiana, Noma, Remington, Powermore, Tecumseh, Briggs and Stratton, Kohler, Yardworks, Yardman, Yard Machines, etc, this is the channel for you.
Tools used in this video:
Torch Tip Cleaners: amzn.to/3MHp3Ub
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you!
Music: www.bensound.com
Thanks. Was unsure if that jet would come out. Idle screw too. Up and running like new. Thanks for posting.
Glad you got your machine back up and running. Thanks for watching and taking the time to leave a comment. Cheers
Nice work. I just did mine but ended up putting a new carb on it. Had to pull the whole engine off to get at everything. Given the amount of work I opted for a new carb. Dont ever remember it running so good.
Nice work! Thanks for watching and taking the time to leave a comment. Cheers
Thank you so much for making this video. Btw for anyone wondering a replacement carb is $15, so I wouldn't even waste my time rebuilding one tbh
Some people like the challenge and get satisfaction from fixing something instead of just chucking it in the landfill. But I agree, replacement knock off carbs are a cheap alternative. Cheers
@@brantsmallenginerepairs I get that, but I get satisfaction either way because I'm bringing the machine back to life, and don't have to waste a perfectly good engine. Then again the carb that I just replaced on mine was quite literally caked in grime and rust inside and out, not much I could do.
I like the challenge of fixing and making old things work instead of chucking it in the landfill. I was able to clean my carb after watching Briant' video. And now it's working great. BTW I couldn't find it for $15. @@wackadoodle8951
Thanks for posting this info! I have a different brand tiller, but the way you present and problem solve will help me get my tiller going. Thanks!
Glad I was able to help. Thanks for watching. Cheers
I am working on the same tiller. Those carbs are a pain to remove and reinstall.
Yes they are. The engineers sometimes don't consider those who have to work on their stuff afterwards. Thanks for watching and taking the time to leave a comment. Cheers
I have a Craftsman that looks exactly the same. I’m having problems with kick back. Flywheel key is fine. I think there is a problem with the carburetor.
When you say kick back, do you mean when starting or when it's running?
What is the piece you say u have broke before the plastic peace can you tell me the name mine broke and i need to replace it
What kind of fuel did you use for this? I recently bought one at a garage sale but it didn’t come with a owners manual
91 octane, ethanol free
So which model is this specifically? I was just given one that needs a carb rebuild but any model number I search nothing comes up. Even tried searching the motor and still cant find proper parts. Thanks in advanced!
I'm sorry but I don't have the model number and I sent it back to the customer a long while back.
Appreciate the video regardless. Mine ended up being a tad newer and seems the previous owner tried to make some "changes" to the unit that werent great we'll just say 😅@@brantsmallenginerepairs
Can i get a link or part # for the carb
This is the one I got. Be sure to check a parts list for your engine to make sure it is compatible. Cheers
www.amazon.ca/Dosens-498298-Carburetor-Stratton-Cleaner/dp/B075WNJTS9?pd_rd_w=qxXKx&content-id=amzn1.sym.5c209954-1063-4582-844a-52f5c73633d4&pf_rd_p=5c209954-1063-4582-844a-52f5c73633d4&pf_rd_r=GPM2KRFBM6H4MFV5ED1N&pd_rd_wg=eX93g&pd_rd_r=0e6d0dbd-6bf4-40d4-911b-5e0ddde6a756&pd_rd_i=B075WNJTS9&psc=1&ref_=pd_basp_d_rpt_ba_s_6_t
Can you tell me the carburstor name or part ?
The carburetor is a Briggs and Stratton 498298. Make sure you verify the part number for your machine using the model number of your briggs and Stratton engine.
What kind of fuel did you use for this? I recently bought one at a garage sale but it didn’t come with a owners manual
91 octane, non ethanol