IceCap 4-Stage RODI Unit - Assembly and Installation Video
Vložit
- čas přidán 26. 08. 2024
- IceCap 4-Stage Reverse Osmosis Water Filtration Systems is a four-stage reverse osmosis de-ionization filter system that efficiently removes up to 99% of tap water impurities. IceCap RO/DI system does not require a power source. It can be installed within minutes to create the perfect water for your freshwater aquarium, saltwater, and reef aquariums.
4 Stage Value RO/DI Features:
RO/DI single-membrane system with durable clear filter canisters
Glycerin-filled pressure gauge
Single Dow Filmtec membrane (The best there is.)
5 µ IceCap polypropylene sediment pre-filter
5 µ IceCap carbon block filter
Refillable DI cartridge with high-capacity color-changing resin
All-in-one universal filter wrench to tighten and loosen canisters
Installation connection fittings, polyethylene tubing & accessories
Does not require a power source to run
View complete instructions here: www.coralvue.c...
Damn, was hoping this was a video showing off a new Hydros Smart RODI. Maybe the next one?
Dang I was hoping this was a video announcing a new Hydros controlled Smart RODI!
Yeah I caught that! 🤔 food for thought!
Then it says to remove the DI filter but only fill the first two chambers to flush the system- how will they not fill the 3rd chamber ?
You just have to remove the DI filter so that the membrane can flush be flushed out without compromising the DI. Water will still go through the DI canister but should be directed towards the drain at this point. It may be best to look at the instruction manual which is a bit more detailed rather than the video: www.coralvue.com/blog/icecap-rodi-getstarted
It shows him flushing the pre filters with the filters out of the Machine!!?? Then says to leave them in place!!?? No help at all
The images are a bit deceiving not showing the filters in place but the vocal instructions are correct and should be followed. For more detailed directions please refer to these instructions: www.coralvue.com/blog/icecap-rodi-getstarted
Nothing says to remove the membrane on top first until 3/4 way through the video!!! And there is ZERO customer support. I just buy new units cuz the filters are impossible to replace and they’re so cheap. Do not expect any help - watch this video if you need proof