Mitsubishi Lancer Motor Mount Replacement (including rear mount)
Vložit
- čas přidán 27. 07. 2024
- In this video, I change out all the engine mounts (motor mounts) including the rear mount on my 2002 Mitsubishi Lancer. This is a really simple straightforward task if you have the knowledge and patience to carry out the repair. The most troubling spot that may be faced is indeed the rear engine mount as i did try my best to show it to you while in the confided space. the only other issue faced was the mount for the transmission was not correct, as when compared to the original. Otherwise hoped this video helped and remember to take caution when removing engine mounts as it can be very dangerous doing so. Remember to hit that like button, subscribe and leave a comment as well as check out my channel content for more.
#MitsubishiLancer #Lancer #lancerenginemount - Auta a dopravní prostředky
A Lancer will turn you into an amazing mechanic. It’s a blessing in disguise.
That's true for sure. I've rebuilt all of the front end suspension in mine and I'm about to do the timing belt here soon.
This is so true wtf😂 now i have a Mazda and watcht this video because somebody consulted me about a Lancer.😅
@@zedsdead7670 same here
@@carlomedic3249 i have both lol
I have been studying this a few days... My Mounts came Thursday, My Tie Rod Tool came today, the Front End Kit is still stuck in Chino California, Thanx To YOU.... I got the Starter Done Last Sunday Without any Hiccups, upped my confidence to do ALL The Mounts after finding the Broken Trans Mount while Changing the Oil Monday.... I can't Imagine You doing all these repairs WHILE Attending School, Full Mark's Duder, Thank You For Helping This Old Detroit Steel Dude Apprentice Through A Foreign Car.... You're Making Me Feel More At Ease Knowing My Wife's Newly Purchased Used Car WILL BE SAFE To Drive To Work.... After I get Tires Next Month, I'll Do the Front Struts.
Yep I’ve been a full time employee and part time volunteer while being a full time student finishing my last 8 classes for my undergrad while also fixing loads of cars in in the night excluding those that come for routine maintenance and somehow managed to continue having a social life (sorta) and enjoying as much as I can to try and make it somewhere that is sustainable. I’m glad my videos aided you in your confidence to mend your vehicle. I make these just for fun not only to look back on what I did, but to share and show my work.
Excellent video. Saved me a ton of fumbling around with the rear mount!
Be careful lifting the engine with a jack always put a block of wood to evenly distribute the weight so you don’t blow a hole into the oil pan.
The best video ever! Followed it step by step today. My car feels amazing.. the rear mount was a PITA! But your tips and trick made it super simple!! Thanks again.
Glad it helped!
Love your step by step tutorial how you break it down tell and show what you're doing keep up the videos
I recommend investing in a pressure washer to clean up projects before taking them apart. Working on clean parts will help you mentally stay positive.
Bro... you have 3 comments. Edit one ffs.
@@chungusamongus519 I’ll comment as many times as I want. The internet is free. Go to China if you want to tell someone how many times they are allowed to comment.
Dude, this video inspired me to try this and i did it but it almost killed me. cross threaded bolts, a mount with holes off an 8th of an inch, literally every step something went wrong. but i did it! Thanks for the tips!
Lol, Yep, I know that feeling. Is hardly ever as straight forward as it looks. And if it is you wonder what you forgot
I appreciate the content it greatly helps with doing these things.
Very interesting. Will be attempting to replace the rear and front mount soon
I think you just saved me $900, thanks!
Appreciate your content bro....👊🏽👊🏽👊🏽..
Very helpful, thanks!!
Glad it was helpful!
Thanks for the info
Bet!
Me sitting in my rattling car watching this video ---> 😃
Hi, did you put a jack under the engine/transmission when replacing the front and rear motor mount? Maybe to get them aligned to put back the bolts? And if replacing only the rear mount, can it be done without removing the front motor mount and that crossmember that it comes with? Thx
Please tell me the mount is the same one the 2010 Evo X... so far can't find anything but the front mount for a video.
I tried to take the part of the mount that is attached to the transmission cause I had to take the tranny out but I only saw two bolts in total looking back I might have just been exuasted lol will be looking at it again today
Lancers are such a painn
Thanks man
How long did it take you to do the rear motor mount alone? They’re telling me it takes a mechanic 8 hours. Is that correct?
I'd like to know too, I'm having a friend come over to help me out I wanna know if I should have a whole day set aside
👍🏻👍🏻
🎉Thank you so much ❤
You are so welcome
How is it without changing the transmissions mount? Is the vibration ok? Thank you bro
Any chance you can put a list with all tools used?
I just purchased the motor mount kit and was wondering what the difference is between those and the tranny mounts when the tranny mounts came in the kit 🤔 wanna make sure because this purchase has me worried 😅
The wheel tends to vibrate at stoplights etc which made me assume a motor mount and have no problem changing all 4 if imma do 2/4 anyways but just wanted the clarification ! Thx!
Man you must have taken that car apart 20 times by now. The amount of work you’ve put into this vs the value of the car would have mechanically totaled it a hundred times over by now.
I have 03 Lancer and where did you get your motor mounts?
Would i be able to remove all 4 (14mm) bolts from the top as well , asking for a friend 😂😂?
Saludos
Cuando el soporte o punto no sale por arriba, habría que dejar bajar la transmisión un poco?
Sería el punto del izq.superior.plis ayúdame.
Muchas gracias.
is the manual and auto rear mounts the same?
So if replacing the front and rear mounts, you dont need to support the engine?
whats the length of long extension you used
That undercarriage could use a good steam cleaning, otherwise how'd that dirt taste.
Perks of living in a salty state mixed with living on dirt roads lol. Once you live on dirt, it seems the vehicle will never be clean again. 🤣
I’m thinking of doing this job, you did a hell of service for many looking to do the same, Thank You.
Where exactly did you get your mounts from?
How did you lift the engine ? Thanks
Jack and wood
under oil pan
Does it have a fuel filter or is it on the fuel pump?
on the fuel pump
Where do I lift the engine at ?
I was dreading doing the rear mount on my Lancer but after seeing this, maybe it won't be so bad.
Looks like i might have to contend with the shift linkages though since mine is a manual. Any alternate routes or info on whether the shift linkages need to be taken out?
are you sure about the front engine mount dirction i think the squre hole should be to the front of the car not towards the engine
AvE likes to say ugaduga’s
It's easy coz you don't have a Ralliart/Evo. With the turbo and everything in the way that's not that easy haha.
K))
where u live? your car Corroded asf
That mount is a bs