Tick Intercooler Completion Kits

The Tick Performance Intercooler Completion kit is designed to get you started with installing and properly operating your billet Air-to-Water intercooler. This kit is built to work with our 1,400hp A2W intercooler for a single feed and single exit. If your build is more advanced or you want the maximum performance from your intercooler, try our dual feed/dual exit kit.
These kits include the necessary fittings for the size we recommend, as well as the appropriate Davies Craig water pump These pumps are known throughout the industry as reliable and well-performing components that won't let you down on the track or on the street.
Included:
Intercooler Pumps - 30gpm Or 40gpm Davies Craig Electric Water Pumps
Plug ORB Male, Black (x2)
Adapter ORB Male to AN Male Black (x2)
Adapter ORB Male to AN Male Black (x1)
Adapter ORB Male to AN Male Black (x1)
Not Included:
Lines, Hose Ends, and Tank
Options
The included fittings are straight, however, to help route your lines on the intercooler is a more eye pleasing direction, you can upgrade to two 90-degree swivel fittings. This can direct the lines in and out of the intercooler at 90-degrees, so you can plumb them parallel to the intercooler.
Lines
The length and style of line greatly depends on your vehicle. We recommend any lines within stand a minimum of 350-degrees Fahrenheit.
Tank
Tick Performance recommends the 1,400hp intercooler be used with a 3-5 gallon ice tank, and any larger intercooler use a 4-7 gallon ice tank. The system can be operated with only an ice tank that runs ice and water/coolant through the system. However, for street driving, you may add a heat exchanger to the system to help maintain more constant temperatures for longer use.
While we carry an array of lines and hose ends, every application differs. So, we've left that open to avoid selling you the wrong or unnecessary components.
Mounting Bracket
We are now including the option of a clock-able mounting bracket with hardware and an optional 90 degree tab that gives you the flexibility to mount or welded on your pump exactly where you need it!
Forced induction setups can vary wildly in terms of application. This is a starting point that allows you to get going, but if you want something more unique to your custom setup, call one of our consultants to discuss: 336.719.0599 ext. 1

[@Slim2x92]

Just the video i needed. So much knowledge in 3mins alone🙌🙌

[@michaelclanton1152]

I would like to see an actual demonstration of the water flow with 6' in/out lines.

[@jplperformance9073]

Very cool 😎