Nihui NH-010 RTF Micro FPV Drone Flight Test Review
Vložit
- čas přidán 4. 04. 2017
- This ready to fly tiny whoop clone includes a 5.8 Ghz FPV all-in-one (AIO) camera and its own transmitter. Find it here goo.gl/ZID1gN
Pros
- Ready to fly including its own transmitter.
- 48 channel 5.8 Ghz 25 mW AIO camera.
- Inexpensive quadcopter, good for beginner FPV fliers.
- Well under 250 grams. Does not require FAA registration.
Cons
- Toy grade controller is not very precise with small stick movement causing large movements of the quadcopter.
- Limited controller range is only about 20 meters. Mainly for indoor flying or small backyards.
- Difficult to change the camera's FPV channels as the channel changing button is located inside the cameras protective cover.
Affiliate links: At no cost to you, I do receive a small commission for sales resulting from these links.
This video along with every video of the Quadcopter 101 channel was produced and edited with VSDC Free Video Editor. You may download this excellent, and no kidding "free" video editor here www.videosoftdev.com/free-vide...
MUSIC LICENSE
"Awel" by stefsax
ccmixter.org/files/stefsax/7785
is licensed under a Creative Commons license:
creativecommons.org/licenses/b...
music was shortened to fit length of video. - Věda a technologie
![NIHUI NH-010 Micro 5.8Ghz FPV Racer [Whoop Dreams!!!]](/img/n.gif)
Thanks for the review. I am going to add this to my collection. Been looking for a good indoor drone. Camera is not bad on it.
I love all of your videos
Very nice video! The name of the drone is funny as you say it .
Have you tried BandGood's Multiprotocol module yet? I believe I saw you flying with a Taranis radio once. This module will work with it and costs less than $10. It greatly increases the control range of the toys quads at the costs of sometimes losing a few of the features of the stock controllers. These toy quads are much easier to fly with a hobby grade controller as well. Just a thought. Love your reviews! Your videos have taught me to progress from just hovering and flying straight away and back to having the confidence to learn and enjoy full translational flight. I'm slowly learning FPV now. It's almost like learning to fly all over again! Keep up the great work and videos!
good vid when they build these you would think they would put camera were you don't see the props a lot of them do that nobody wants props in vids thanks great channel love your sence of humour funny guy
This pretty much IS a E010. I'm controlling it with my FrSky + mult-protocol module using E010 sub protocol.
What indoor fpv would you recommend for someone new to fpv and I do have a t8sg v2 plus? Thanks
hi quadcopter 101. very nice and honest reviews. i've been watching you for a while. i also bought syma x5c1 from the link on your video "your mother could fly this".
i want to ask you something. i see you use FuriBee VR01 FPV Goggles in many reviews. can i use them with FuriBee F03 AIO Mini FPV Camera connected on my x5c1? i guess is very easy to connect the camera on the board or even with a switch to the battery. i have modified my controller and have a range about 150meters. the f03 camera combined with VR01 can get to that range? if so i would be happy to give me a link with aff to buy them (gearbest preffered).
do you have any better setup on thiw budget?
thank you very much. keep up the good work
Yes you can use the goggles. But the F03 is only a 25mW transmitter. I doubt that it will get you 150m range. You'd need something like a 200mW transmitter. But such a transmitter would drain your quadcopter's battery rapidy. It would need its own dedicated battery, similar to the way I did it here czcams.com/video/zyBwhEP3E_M/video.html
Why is it that I can read and reread my comments but never see the typos until I post them?
I have the same problem😊
Boy, what a disappointment from the NiHui U807. That one was well designed and flew great. Can't say the same for this one, and with all the competition out there in this category, I don't foresee this as a huge hit for NiNui ... but, time will tell. I didn't expect much in the way of range or duration with just a 1S 150mah battery on board and a couple of cells in the (toy) TX. Oh well, nice to see that NiNui hasn't completely gone away. Thanks for the review. Cheers.
As far a small drones like this that are FPV and will take a Syma x5c battery do you have a favorite? Also goggle favorite.
Richard William not sure you'll find 6mm or 7mm motor quad capable of pulling a 500mAh battery.
It it using an inductrix frame or are they similar? I like how it looks black
It's a clone, so they're similar.
any more videos coming on the Up Air one soon?
Probably not.. But here are the three that I've already done:
czcams.com/video/sYZ6rGw9Iq0/video.html
czcams.com/video/UiqveBZt9_U/video.html
czcams.com/video/Xy85LLfn9LA/video.html
Sweet, can I run it with a 4.35v 450mah 1s LiPo?
It could. But most LiHV batteries come with PHP 2.0 connectors. This drone has a white LoSi connector. You'd need to change the connector on the drone or battery.
How do you access the camera on this drone?
Scott Howard EZ
Il y a des français ou pas ?
These are great value ive got 3 lol
lol link is not active anymore.
I just tried it now. It seems to work for me?
It Looks like the Blade Inductrix FPV quad
It's pretty much the same, but blade has acro mode
sorry to be such a hard-ass but this one needs to be priced at thirty bucks and no more then I can give it a stamp of approval and a five-star
Soulcommander should be $33.00. Instead buy a Furibee f36 for $13.00 and add a boldclash f-01 for $20.00.
Gimp Man Now your talking
hi
This is the cheapest fpv drone I want 😢😢but can't
This is from 7 years ago. It's no longer being made, or available for purchase.
first
:'( I hope i got a new drone... my old drone is broken now...
R.I.P Syma X5C-1
I hope you will do a drone giveaway please!
Or could you give me your cheapest drone you have... i just really need a drone to kill my day by day boredom...
Why not fix your broken X5C-1? Every part on it is cheap and easily replaceable.
Really!? Thanks For the reply!
Or just get the bind N fly version for 20 bucks!
Here's a list of parts goo.gl/8zI17R
One thing about the repairs which I have done in the past, you must know how to solder if you do not know how to do that then just get the bind and fly version as I states before, it is still cheaper to fix the old one so one way is cheaper the other is just a purchase and play option. But yes 101 is correct, they are fairly simple to repair.
Everything about it looks great except both the battery life and the transmitter are straight up garbage and completely remove this off of my to buy list
gotta stop drinking while flying a squarely drone....