GSXR 750 transmission replacement part #1
Vložit
- čas přidán 7. 03. 2024
- Whats up everyone. This will be a short description because I am on the road for the start of the 2024 Motoamerica race season. This is a 2006 Suzuki GSXR 750 with a 240 kit on it. You will see over the next few videos of all the problems this bike has. If you have any questions feel free to leave a comment are you can find me on FB at Limitless Powersports servie & repair are you can email me at limitlesspowersports78@gmail.com
Free Music for Videos 👉 Music by Crusader - Rage of Streets - thmatc.co/?l=ABF72E94 - Auta a dopravní prostředky
Man where were you a year ago lol. I replaced my 750 gearbox and had to kinda figure it out on the fly, there isn't that much content out there like this. Thank you for the videos!
I get that a lot with my videos. I should if starter my CZcams channel a few more year ago.Glad to hear you figured it out tho. That just makes you a better mechanic in the end.
I appreciate you responding. I started watching part 2 and had a bit of a panic..is there a video of any bike you have made from the end of video one to video 2? That I can refer to?
My main question would be should I swap everything as is?
Do I need to be in nuetral?
Your tutorials are on point, especially the vocabulary on specific parts.
I believe I was in second gear. I have no damage inside the top block, it’s just the bottom gear rod that is slightly bent.
Thx man.
I sure don't have any other videos beside what's posted here. But when you say bottom rod that's bent. I'm not sure what you are referring to as bottom rod. Now is you have to change a Transmissions shaft, you can take all the gears off & put them on a new shaft but I would definitely order new spacers & snap rings to go on the newly assembled shaft.
Cool video thanks
By the sound alone when you start the bike I’m pretty sure of the direction I need to head. Appreciate the video!! Thank you brother!! I e lost 6th gear all together on my 05 Gsxr which is stretched and 1st and 2nd gear has that exact same sound!!
This EXACT situation happened to me..same exact bike, model and size. Right down to the same parts I need to replace.
This video and tutorial has saved me countless hours! Thx man.
I'm glad to hear that this video really help you out. That's my whole idea behind my channel. Let me know how it turned out for you.
I see the military sticker on it say Air station Cherry point NC! That is about 7 miles from my house !
Hi ,do i have to strip the whole engine like you did just to replace the Shift forks in the transmission ? My 5th gear is sliding on my gixxer 05 and just want to fix that issue ?
Hi, how much would rebuilding a gearbox rebuild cost on a 2010 gsxr1000? Thanks!
I'm pretty sure I just answered the email back but yeah most shops in charge away from 2500 to $1,000 to put a transmission in it
What csn possibly cause this kind transmission damage? I've heard the early Hayabusa had weak transmissions.
Well having an extended swing arm with out a jack shaft pulling from that length & doing burnout can cause the output shaft to bend. He was lucky the crankcase didn't break. The customer bought the bike in almost this condition.
I have a Hisun 750 crew. Where is the starter located so that I can replace it?
It should be mounted on top of the crank case right behind the cylinder. Are you sure youre stater has gone bad?
@@limitlesspowersportsservic3394 yes. It smokes and barely cranks with a new solenoid and jumped battery
Was the suspect caught on highway 99?
???
for a race bike it doesnt look well mainted
This was never a race bike that I'm aware off. The previous owner might have tried to street race it but definitely not on a drag strip. It's a stock motor they just did a hack job when they put the 240 kit on it.
hi how can i contact you
You can email me at Limitlesspowersports78@gmail.com & we will go from there.