First Ride/Burnouts! 670cc Lawn Mower Pt. 4
Vložit
- čas přidán 26. 08. 2018
- Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
----USE CODE "CC10" FOR 10% OFF AT GOPOWERSPORTS.COM----
(Discount applies to mini bike, street kart, and off road kart parts only)
Live axle kit: goo.gl/Ej1YkW
Spun aluminum fuel tank: goo.gl/UvqQeJ
Go Power Sports: bit.ly/3QKyODE
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video. - Auta a dopravní prostředky
Gentlemen. This is your finest creation to date. You should be proud of this one. Please finish it...including paint. It deserves the "all out" treatment.
for sure!!!
it's pretty sick
Totally agree! Give it some paint and keep it maintained boys@
I agree
I'll agree , epic build.
Takes me back. I am 68 years old and came across your mower video. I had built a motorcycle out of an old, heavy, one speed bicycle with wide tires when I was 16 years old. I pulled an old weed burner engine out of our scrap pile on the farm and adapted it with belts and pulleys to power the thing. It was a vertical shaft engine but I converted it to horizontal somehow, (a small engine mechanic had told me it couldn't be done). I used a piece of wire to run the throttle and it had no brakes. A piece of flat iron with a pulley and a peg for my foot was used to tighten the belt to engage the rear wheel. Everything came form our scrap pile or was hanging on the walls of our old shop. I didn't buy anything. First time out, I was disappointed. I replaced the drive belt with one that fit the pulley groove better that I had found laying around our old shop. After that I was able to do 30+ mph. Wore out a pair of work boot soles dragging my foot for brakes in the first week. My girl friend was there for part of it and we roasted marsh mallows with a torch for a snack. She is now my wife of 46 years. Only regret is that I didn't even take a picture of it. Hearing you guys laugh as you drove around your altered mower was a great reminder that sometimes the most simple things can be the most fun. Do be careful.
This video gives all broken down mowers a purpose in the world 🌎
Me
Yes
SOUNDS LIKE A FLIPPIN V8
on another episode of cars and cameras...we tie together 4 640 cc motors
ISMAEL RAVENLOCK - wait... WHAT! LINK PLEASE!!!
It's 1/4 of a v8
More like a Harley
I'm working on a '62 Wheel Horse. Stock, Predator, other than a straight pipe, and I hit 27. Shooting for 50. If I hit 50, you guys should be going 90.
Your plasma cutter settings are killing me.
If it cuts its fine
you still in liberty city niko bellic
USN_Ret 84-05 i was just going to mention it, think bout time for em to watch a CZcams vid on plasma how to. The voltage is wrong and id say dragging the tip directly on the steel. Buy a drag style tip, there fool proof...
Need to have a clean direct ground for a plane cutter
the only thiing that is set up correctly is their angle grinder LOL
Is that a Plasma Cutter?? or really a High Voltage Morse Code transmitting device???
mellowingwithage lol This made my day
Haha you've just won the internet Sir.!!!
I can read Plasma Morse Code, it translates to It’ll be Fine
Ol Man Samual´s given his ok so , Rock on Boy´s and Dont forget to Stay Mellow
The morse code translates in: "Kill me please"
You know what, I'm 50 & watching your antics makes me grin like a silly school boy ...keep it up! :-D
Thats the sweetest thing iv seen the two of you build. Pure badassery...
Think it'll wheelie on dry pavement?
Most likely
CarsandCameras omg I’ve been waiting and been watching for over 2 yrs keep it up guys
Probably
Probably if you are in the right gear ;)
put less air in the tire and it will wheelie for sure!
"It's not about how fast you mow, it's about how well you mow fast"
Isaac Lassi well it don't mow no moe
😂😂😂
It dont mow the lawn, it shreds the lawn.
Sure it does, doesn't even need a deck just a fresh set of turf tires. ;)
@@dustinmiller7278 not with that attitude
Hey!!!! Guys... I've been watching y'all's videos from day one. Me and my brothers have done a lot of work projects just like you guys are doing, my brothers are no longer with me now because god decided to take them home. I still try to keep doing projects going when I'm not working in the Saw Mill here on my homestead...in Perry county KY, you guys rock!!!! ... it's like being there with you guys when I'm watching your videos. I've learned a lot from watching you guys work on some of the coolest projects!!!! Keep making them!!!! Thanks guys...
This is my new favorite first run. You shattered any doubts I had on this build. Very well done!!!!! ✌️😎👍
DUUUUUUUUUUUUUDE!!!!! I KNOE you guys are stoked!!! Hell, I was grinning like an idiot just WATCHING this one!!!
motorcycles have long chains with long travel. it's not a new problem. Get a roller tensioner and carry on.
SOVA Rides
Thinking the same thing
SOVA Rides my thoughts exactly
Perfect outcome to this build. Looks like its going to be loads of fun. Didn't comment on any of the other videos for this build because I was waiting to see the final part. Great job guys
This is one of the most educational channels on youtube when it comes to fabrication and fitting engines onto chassis. I just like how you show a lot more of the stuff that other channels think is tedious and cut out, so we can see how the actual mechanical work happens and pickup on techniques and such.
Front of mower looks like Bender from Futurama .
HAHA YES! with the hood on @12:39
“The launch mower” she’s a beast!
Nice name ahem
Genius
oh. my. gosh. that thing is badass!!!!!!!!! probably my favorite build yet!!!
Awesome to see you guys having so much fun with this one! Your laughs were contagious!
Now put the Ducati on the rail.
YESSSSS!!!!!
That would be absolutely amazing
I wanna see that happen
Hell yeah that would be ridiculous 😁😁😁😎
Yes. That
I love John's laugh when Ike was doing the burnouts! That excitement just cannot be contained
Raw horsepower is a better drug than anything, gets me going for sure :-)
Things I love about youtube.... the personalities really have fun... and this looks super fun.
Look us peerless 700 transmission. It was used on snapper and old toro lawnmowers. They convert the belt into a sprocket that runs back to a live axle. Very common on racing mowers and also give you reverse and 5 forward gears
Cole Rippeon us racing guys remove the reverse chain and gear on those 700s as well as a few other things if ya try running those with the reverse chain in there your going to have a bad day
They also tair in to it an charge the gears so you don't blow the transmission up they didn't want to do all they did a great job
damion loya just the input and bevel gear get changed out for steel gears stock ones are usually powdered steel (junk metal) I’m still using the stock gears in mine, and I run a 21 hp briggs vtwin. So far so good.
I have one if anyone's interested?
Elijah De Calmer interested but my budget says otherwise. I’m using the stock peerless with welded gears. It’s a work in progress.
next build 50hp sofa
Haha now there's an idea or a lazy boy with that 50hp motor on it
50hp bar fridge.
50hp DRIFT sofa
@@guidoberenstein4775 even better
70hp drift tolet well colen furz done it but would still be cool
This thing is literally the best thing ever!! Possibly my favorite of your projects so far!! That engine also sounds so good!!
Man that thing sounds crazy!!! This is the kind of build I've been wanting to see you guys do! Awesome!
You should see if tou could use the transaxle in another build
Jush 1 - How about an old Harley Trans running a dry clutch setup, that might be fun too.
It sounded like the transaxle was getting a pretty loud whine, I dont know how much life it has left they arent ment to spin as fast as it did
@@ap3xglide962 i think the whine was from the straight cut gears, which make that sound.
@@jush5390 Oh maybe. It does sound like a trans with straight cut gears but I thought it was quieter in previous videos but Maybe not idk
That thing is bad ass. I can't wait to see it finished. Thanks guys.
Hell yea, leave the 670 on the mower this is a badass build more videos of it plzzz
Wow, that thing really rips!!! Can’t wait to see it finished!! Sounds great too!
Best project u guys ever done!!!! Keep it up👍👍👍
Previous episode “50hp motor pt. 2”
This episode “50hp mower pt.4”
Wait.... waaaaaiiiiit....🤔
Nolan's Projects just noticed that😂
Is there a part 3???
Thee best sounding lawnmower EVAR! Ready for the sand drags at Busco Beach! Congrats to 500,000!
I've been looking forward to your next upload since your last one! Great job guys!
Y’all need to make more violent stuff like this!!
Hey guys! Love the great content keep it up! Can’t wait to see what the future brings!
This is a awesome build guys. Looks like a ton of fun. Love the videos and keep em coming
Omg just got off work and was so excited to see this. This things awesome!!!!. That was laying ruber good. Hope to see this at busco!!
Hey guys the mower is bad ass. It will really be awesome at brisco beach with rail sand tires with flapers on them. I cant wait untill the next one
I will do it every time but
*BOOOOOOOOOOOST*
Love it... some of the best backyard building stuff I've ever seen build me something
Congrats on the 500k. Glad to be a part of it. This is awesome. Keep it up. That thing is gonna scoot. The video labeled pt2 was actually pt3. Count them. This was the 4th video.
See the plasma cutter still isn't adjusted correctly
I was thinking the same thing weirdest plasma cutter ever..
Moist air.
Duck Farts?
The psi turned up too much sounds like that to me to much compressed air
Seems like they need a regulator for the air pressure. And the tips maybe dirty mine acts like that as well
OMG!
I've gotta build one of these for my 11yo Daughter...
Take care John & Issac,
🤓 -Thomas
Western Washington State
Lovin’ the build!! I was sad when it went away. This is really coming out amazing! I have been working on my first lawnmower build for a while now. Let me know if your jack shaft needs a home. I have the same belt alignment “issue” on my Crapsman tractor. 😂
Amazing I can’t wait to see it finalized!! Watching and listening to that thing is astoundingly cool.
Part 3? Btw Nice video 👍
That mower is ignorant! I love it, great job.
I really wish we lived close because I would be there all the time working on this stuff with you guys. I don’t have any friends here to enjoy the love of working on cars and toys like this. I do really like seeing you guys enjoy life!!
That thing is epic! I got goose bumps when I saw it spin and pull sideways. Every mans dream mower!
I wanna see four of these engines on the AWD go cart.
This engine cost more than 2500$ to build no your not ganna see 4 on a go kart
@@anthonylyrette7399 it would kick ass though
@@Handle_gravel yes this is sure
The power weight ratio on that thing would be crazy I'd like to see it
They would die
How in the world did this Get dislikes this is one of the coolest things ive ever seen!!!!!
There's always "Sour-Grapes" no matter where you go.
The person who hit the dislike button probably was having so much fun that they misclicked
Or some random Karen got offended and wanted the manager
@@thedancingpickle6362 or they just didn’t like this type of video and didn’t want them showing up on there recommend but you’re theory is probably better
Guys this has been my favorite project, y'alls video's are awesome. That engine sounds soooo good by the way.
By far the best thing you guys have built!!!!
A chain tensioner and chain guard, once a the chain hits a rock you'll either loose teeth on the sprocket and/or throw the chain. Think about adding some sort of front end glide plate/bump that extend in front of the the wheels... too slide of rocks, ruts, tree stumps & roots.... mainly to prevent from stoving in the front end & too protect the front wheels from clipping a tree. Awesome build look froward to seeing to at Busco Beach
Holy crap new favorite project made by you guys I'm making one lol
Wow, that things a animal!
Awesome build guys 👍
Congrats on the 500 thosand subs guys been subbed since rat rod wagon days this 670 on the mower is a beast .
...time to dominate at the Busco beach drags...maybe cut up some tires into strips to use as chain guide pads so it doesnt wear out
You can put a skateboard wheel on one of the go power sport springer front end and make a chain tensioner and hide it under the chain gaurd by your feet and instead of using a square chain gaurd make it more like a transmission tunnel that will blemd in witht he floor
Wow. It's the 'Insane-o-mower". Awesome. You fellas were mad riding that out of control thing around so many vehicles. I'm glad you didn't hit anything and no one was hurt. It looked like it would wipe out or roll over at any moment. It was fun to watch. It looked too dangerous and lawn destroying to lap around the GP Circuit. Interested to see it own the drags at Bosco. Thank you for sharing.
Great video and congrats on 500K guys!
That old brake assembly is what we called a, "push me pull you" arrangement.
Use some blue Loctite on those collar screws to keep them in place. You can also use red Loctite, but it may require using a torch to heat up the collar to remove the screws. Just put some idlers on the chain to keep it from flopping around.
I have been watching for 5 years since the corvette c6 review
ao scoots Impressive!!! 👍🏻👍🏻👍🏻
AWESOME VIDEO! GUYS, Ya'll ought to build a predator 79cc converted bike next project!!
This is one of the few channels that I do not over comment on because you guys are car guys like me and you hit it out of the park again. Beast.
Good build. My favorite so far.
That thing sounds like a strong V8. Crazy.
Alot of race mowers actually remove the seat and build a new one directly on the chassis. Or even cut a bucket into it. That way your sorta "in" the mower instead of on it. Brings the c.g way down and even perhaps driftable
Favorite build yet!
That is the sweetest mower i have ever seen. Great job
Take that thing back to that sand drag track. I bet it will be twice as fast as the rail ever was... Maybe get some paddle tires? 😀😀
This made me giggle like a little girl. EPIC!!!!!! A mini tractor pull would be awesome. YE HAW.
I've got a17 horse opposed twin love to have a race
That’s awesome made me smile before I had to go to work nice work guys
So awesome to see what your show has matured in to
I got into building gokarts because of you guys! Keep doing what you love!
John is a surgeon with the power tools
At times more of a Sturgeon but he's improving lol...
This is one of the best projects yet! I like it even more than the dragster!!!
That thing is awesome. You have to show it a lot more. I love it.
Awesome job guys! Congrats on 500k y'all deserve ir. Great content and great builds! Epic success
I have never clicked on a video so fast before
That thing rips ! And the sound is just awesome 😂
I feel like more folks would mow their own lawn if they had a lawn mower kinda like this one. This beauty is a keeper!
Cook the berrings😂. Make sure you preheat to 350 degrees.
Noti squad where you at
Lol
Your moms
I can't believe I started watching this channel over 3 years ago and it has grown so much
that thing is sick, love to watch this show. keep it up guys
Aaaaaaaaand where is part 3?
OfficialHydracor I think John accidentally called part 2, part 3 and must have just gone with it, haha!
There’s no part 3 what so ever lmao
Thought I missed one too.
@@dream2sea if "part 2" is actually part 3, then where is part 2? It is part4 and that is want it seems he wants is to be.
Jb Gmail Maybe 2 is the new 3, Lol!😂😂😂
'Watch as the Killer Mower, in it's natural environment, roars and charges at it's only known predators.......The Cars and Cameras Guys.......and, once mounted, it continually tries to throw it's riders to the ground whereon it may trample them but, luckily, after chanting their mantra, "It'll be fine", these brave, semi-trained professionals are able to tame the beast and begin training it to lift it's front wheels off the ground with out hurting itself or it's rider.......to be continued.
wish i could like this a thousand times. you guys are insane. id love to build one like this. bloody awesome video.
That is so far the coolest thing you guys have made!! I want it soo badly!
Why didn't you guys use the Ducati motor from that bike? That would be insane!
I like ur thinking haha but that would be crazy haha
They probably have to keep it together because of velocity I could be wrong
Because that WOULD be insane 😂😂😂. That much torque would either pull the rear axle to the engine ( rip it out of the frame) or fold the stamped steel mower frame in half under them. 😂. It’d be a wild ride though!
dudes! whats the deal with that plasma cutter? is it gettin moisture in it from your compressor?
Yeah, moisture is part of the problem. Moisture, probably wrong air pressure settings, no 220 power. It's a mess hahah.
CarsandCameras i cant believe ol ike hasnt got that thing dialed in
That is Literally one of the coolest things I have ever seen I love the stuff you guys build keep up the good work
Badass rock and roll in that thing is a beast you guys are awesome at building everything love your guyses channels I've been watching you since day one keep up the good work man I like to see that on the drag race
Wow
Hey John who’s the new cameraman?
One of my friends from high school, he does some editing for us too. He does really awesome stuff!
Perfect home for the 670! Much better than on the dragster, nice work guys that thing rips!
I love the work yall do keep it up I stay in sc I mit need yall on a project am doing job well done