Bang on. Yep the Nox is good with the 6” coil I use the Coiltek 5” wide elliptical now and Field 2 multi with recovery 6 plus in those type of conditions. I also notch out magnetic soil while still getting the iron but pressing the all metal horseshoe brings it back for ground information. Also do you have 0-3 notched out? Or even 0-8 That might help with the chirpy ground. I use manual ground balance because tracking does not do well in those conditions. But the one thing that really teed me off was Minelab not answering my eMail. Keep em coming the real ground tests are very informative. Our clay is mixed with gravel and turns concrete hard in dry spells and the summer. I have to take a pick with me. Are XP going to do a 5” wide coil for the D2 Do you know?👍👍👍
I do not like notching on any machine so I do not miss tricky targets and small gold jewelry. Ground tracking on all my machines has never worked in my harsh soil. My soil hardens up like concrete in the summer too. That is when I hunt the relic dumps and in the water. I can not tell you what XP is doing at the moment. I can tell you the engineers are working very hard on v.7 to fix multi full tones and probably some new tonal features. Small coils are essential for getting through modern trashy site like parks.
@@PaystreakSuperfreak I notch below 0. But I also may choose to notch up to 8. But notching out 1 and 2 will not miss much of value except on certain sites I find. Check what number that gold ring was. I’ll be interested in the V7 update and if XP produce a small coil. I would even like a 6”x3” for getting right between the iron. 👍👍
That is one limitation to the ORX is that with the 3 tones and no tone break options also no iron audio volume control you are challenged in a trashy park. You also are limited in that you can't really make a trashy park discrimination program either. In fairness I don't think the machine was billed as a coin-shooter / park machine but one way you can at least help in those settings is run your sensitivity much lower I can go down to 75-80 sens and still get targets at 4-6" and cut back on some of the soil and emi. Still my go to relic machine and moderate soil conditions in parks. Just like you said once you clear the ground out you can change freq or increase sensitivity. It has taken me a long time but I can also listen for those subtle iron grunts of a solid tone and tell iron from a good target. Of course you'll never know if you don't dig it all. Nice video the legend is doing well in your soil.
The ORX is a deep machine if you know where and when to use the right coil. It does have many limitations in modern trash. The Deus 1 is leaps and bounds better in modern trash than the ORX. Both perform well in iron.
Non cambierò mai il mio orx compagno del mio Deus con altri metal ! ORX con bobina x 35 ha 7.7 khz e un mostro su targhet di argento in terreno mineralizzato 👍
Try threshold hunting with the nox in gold modes it won't break over iron .I have noticed the nox does not really like disturbed soil. I like your videos also a deus user as well I probably won't get a legend maby a deus 2 not sure yet pretty happy with what I have. I have 1000s of hours on minelabs but logging quite a few on the xp machines I wish the equinox had a update to make it perform like my excalibur variable tones like the hot program on the deus 1 .any how great videos I learn quite alot watching
So today was interesting. I detected a yard from the 40s and hit a few Wheaties and zinc's. I for some reason was like let's try this beach mode once. I smacked 2 silver dimes in like 10 mins. Version 1.06....think I liked 1.05 better. Idk that beach mode was working great though
I've used beach mode on other machines during very wet conditions when the water table is high and the minerals are in a soup of mud......which in some ways simulates a wet salt beach. At least until things dry out. If it's working go for it. :) I run over all my productive spots in every mode eventually. They each just bring something different to your attention that you may have missed before.
Which one would you buy ... i'm a noob and live in AZ, I am looking into the ORX $600 and the Nokta Legend $500 and Nokta gold finder 2000 $600 ... looking mostly for gold, coins and relics, TIA
I have never hunted in Arizona. I can tell you that the GF 2000 is very heavy and definitely not a coin machine and also is only a 1 tone machine. The ORX probably will not like the fine dust of the desert very well because it is not waterproof and the dust can ingress into the remote. The Legend is a steal at 500. The LG24 coil would be perfect for gold or coins. Hunting for gold in the desert is by far one the hardest type of metal detecting. Finding small gold is almost impossible with VLF detectors. You really should use Pulse induction detectors for best results on small gold.
Man your soil is bad, my ORX will bang out 7-8 inch wheat pennies and indians all day in coin fast w the 9" hf coil in 14.4, I have never ground balanced it. Thankful for my mild Nebraska dirt lol.
Hi brother, check calabash digger results between you two sending recommendations and results to Nokta and we will have a super detector . Thanks to guys like YOU and your hard work. I just got my legend last week and I find it unstable also and in some ways a bit unpredictable ,as in getting Repeatable Signals , find at times it has a mind of its own . Updates I find making things that were good now Unpredictable and things that were issues somewhat better. Take care .
@@PaystreakSuperfreak ps Don’t think that Nokta isn’t watching guys like you right now . Believe me they are watching 👀 utube veryyyyy close right now . God Bless us all and take care from🇨🇦 , once again . Thx for videos . 👍👊🏻😉😎
@@PaystreakSuperfreak man it is all kinds of trash. Pull tabs aluminum bottle caps. Melted aluminum rings up so good on my machines. Cans that hit nickel range. There has to be older deep silver coins here. I'll never hit them though.
I can hit a 11" nickel and 7' dime with the orx in my test garden.....on 28khz.
But my soil is mild.
Orx is still a great machine
Luck, Perseverance, Curiosity, interest in old metal crap. Amazed by the magic wand. I got the digging bug
All of what you speak of gets you the most keepers.
Bang on. Yep the Nox is good with the 6” coil I use the Coiltek 5” wide elliptical now and Field 2 multi with recovery 6 plus in those type of conditions. I also notch out magnetic soil while still getting the iron but pressing the all metal horseshoe brings it back for ground information. Also do you have 0-3 notched out? Or even 0-8 That might help with the chirpy ground. I use manual ground balance because tracking does not do well in those conditions. But the one thing that really teed me off was Minelab not answering my eMail. Keep em coming the real ground tests are very informative. Our clay is mixed with gravel and turns concrete hard in dry spells and the summer. I have to take a pick with me. Are XP going to do a 5” wide coil for the D2 Do you know?👍👍👍
I do not like notching on any machine so I do not miss tricky targets and small gold jewelry. Ground tracking on all my machines has never worked in my harsh soil. My soil hardens up like concrete in the summer too. That is when I hunt the relic dumps and in the water. I can not tell you what XP is doing at the moment. I can tell you the engineers are working very hard on v.7 to fix multi full tones and probably some new tonal features. Small coils are essential for getting through modern trashy site like parks.
@@PaystreakSuperfreak I notch below 0. But I also may choose to notch up to 8. But notching out 1 and 2 will not miss much of value except on certain sites I find. Check what number that gold ring was. I’ll be interested in the V7 update and if XP produce a small coil. I would even like a 6”x3” for getting right between the iron. 👍👍
Go back with the orx and try them coins in 30 khz.
That is one limitation to the ORX is that with the 3 tones and no tone break options also no iron audio volume control you are challenged in a trashy park. You also are limited in that you can't really make a trashy park discrimination program either. In fairness I don't think the machine was billed as a coin-shooter / park machine but one way you can at least help in those settings is run your sensitivity much lower I can go down to 75-80 sens and still get targets at 4-6" and cut back on some of the soil and emi. Still my go to relic machine and moderate soil conditions in parks. Just like you said once you clear the ground out you can change freq or increase sensitivity. It has taken me a long time but I can also listen for those subtle iron grunts of a solid tone and tell iron from a good target. Of course you'll never know if you don't dig it all. Nice video the legend is doing well in your soil.
The ORX is a deep machine if you know where and when to use the right coil. It does have many limitations in modern trash. The Deus 1 is leaps and bounds better in modern trash than the ORX. Both perform well in iron.
Did your clippers break while shaving lol?
That half shaved face was a social experiment. The results were surprising.
😂 didn’t expect that ha ha ha.
Non cambierò mai il mio orx compagno del mio Deus con altri metal ! ORX con bobina x 35 ha 7.7 khz e un mostro su targhet di argento in terreno mineralizzato 👍
Try threshold hunting with the nox in gold modes it won't break over iron .I have noticed the nox does not really like disturbed soil. I like your videos also a deus user as well I probably won't get a legend maby a deus 2 not sure yet pretty happy with what I have. I have 1000s of hours on minelabs but logging quite a few on the xp machines I wish the equinox had a update to make it perform like my excalibur variable tones like the hot program on the deus 1 .any how great videos I learn quite alot watching
So today was interesting. I detected a yard from the 40s and hit a few Wheaties and zinc's. I for some reason was like let's try this beach mode once. I smacked 2 silver dimes in like 10 mins. Version 1.06....think I liked 1.05 better. Idk that beach mode was working great though
I've used beach mode on other machines during very wet conditions when the water table is high and the minerals are in a soup of mud......which in some ways simulates a wet salt beach. At least until things dry out. If it's working go for it. :) I run over all my productive spots in every mode eventually. They each just bring something different to your attention that you may have missed before.
Which one would you buy ... i'm a noob and live in AZ, I am looking into the ORX $600 and the Nokta Legend $500 and Nokta gold finder 2000 $600 ... looking mostly for gold, coins and relics, TIA
I have never hunted in Arizona. I can tell you that the GF 2000 is very heavy and definitely not a coin machine and also is only a 1 tone machine. The ORX probably will not like the fine dust of the desert very well because it is not waterproof and the dust can ingress into the remote. The Legend is a steal at 500. The LG24 coil would be perfect for gold or coins. Hunting for gold in the desert is by far one the hardest type of metal detecting. Finding small gold is almost impossible with VLF detectors. You really should use Pulse induction detectors for best results on small gold.
@@PaystreakSuperfreak Thank you sir. I am leaning towards the Legend. Seems like a better all around machine.
Weird how all the machine struggled on that large coin. Is it a modern steel clad coin or token?
90% copper coins. My soil is very mineralized. The bigger coils even struggle more on freshly buried coins.
Infelizmente um tipo de solo desse é descartado pra detectorismo. Faz teste lá a onde faz suas caçadas.
Again, Thank you.
Was The First Detector a ORX or The Deus 1 …….Trashy Sites are always a challenge especially with Iron
ORX
25kz in the iron,speed up reactivity to suit
Não sei porquê não usa o modo prospecção. Modo disk não funciona. Equinox 800, x-terra 705, Impac da makro, são os que conheço.
Thanks for vid.
You bet
Man your soil is bad, my ORX will bang out 7-8 inch wheat pennies and indians all day in coin fast w the 9" hf coil in 14.4, I have never ground balanced it. Thankful for my mild Nebraska dirt lol.
High end machines struggle in my soil
Hi brother, check calabash digger results between you two sending recommendations and results to Nokta and we will have a super detector . Thanks to guys like YOU and your hard work. I just got my legend last week and I find it unstable also and in some ways a bit unpredictable ,as in getting Repeatable Signals , find at times it has a mind of its own . Updates I find making things that were good now Unpredictable and things that were issues somewhat better. Take care .
I was having great results until I updated to v1.06. I am back to v1.05 again and am back to finding the good stuff.
@@PaystreakSuperfreak ps Don’t think that Nokta isn’t watching guys like you right now . Believe me they are watching 👀 utube veryyyyy close right now .
God Bless us all and take care from🇨🇦 , once again . Thx for videos . 👍👊🏻😉😎
ORX is a gold detector, that is why it likes iron, sounded like gold for orx.
What is the best frequency to use for coins on the legend and equinox in trashy areas?
10-15khz works well. It really does matter how much trash and what kind of trash.
@@PaystreakSuperfreak man it is all kinds of trash. Pull tabs aluminum bottle caps. Melted aluminum rings up so good on my machines. Cans that hit nickel range. There has to be older deep silver coins here. I'll never hit them though.
@@PaystreakSuperfreak you wouldn't happen to have the 1.04 version of the legend you could email me would you?
send in the nox coils and get new ones
And get the same crappy plastic again?
no point to do such a tests on such mineralised ground as for 99% u dont dig in that kind of conditions.
I dig in these conditions in most of my videos.
Fatto male , molto male , troppo casino attorno
I buried those coins in "THE WAR ZONE"
Dude What in the Sams Hell is going on with your beard. Two face ? Wtf 😅😅😅