How to Make the Best Conductive Paint/Ink (Amazingly conductive)
Vložit
- čas přidán 20. 01. 2024
- In this video l will show you how to make conductive paint, conductive ink at home. #conductivepaint, #conductive ink, #graphite
Conductive paint,
Conductive ink,
DIY conductive ink,
DIY conductive paint,
The best diy conductive paint,
Conductive graphite paint,
Conductive graphite ink,
Water based conductive paint,
Water based conductive ink,
How to make conductive paint,
How to make conductive ink,
silver conductive paint,
iron oxide,
metal oxide conductive paint,
copper conductive paint,
conductive paint for electroplating,
conductive paint pen,
bare conductive paint,
carbon conductive paint,
electrically conductive paint,
conductive paint applications,
conductive acrylic paint,
conductive ink applications,
electric paint sprayer,
acrylic conductive paint,
conductive black paint,
bare conductive paint pen,
conductive paint circuit,
electric paint diy,
diy graphite conductive paint for electroforming,
conductive paint electroplating,
conductive epoxy paint, - Věda a technologie
Great job, really like this one.
This video is incredible. I'm so excited!!!
Thanks brother.
¡Gracias!
Thanks brother it’s very kind of you.
That's great
Thanks
Thank you friend for sharing your recipe for ink, it is the best I have tried so far.
You’re very welcome my friend
This is great. I once made conductive ink using graphite powder using the same binder, but it was disappointing. The best i could get was around 30 ohms per square CM. Some people on youtube could make ones that are 5 - 10 ohms per CM, but i could never figure out why theirs was better than mine.
I don't see any that high. Are you sure??
@@TravisTellsTruths
yep
I found to get decently conductive graphite paint or powder you want to use as little binder as possible while still having good strength and spreadability. However this will result in a weaker paint if you use too little binder.
You will want to wait for it to dry VERY THOROUGHLY. I mean it. Seriously. Wait for it to dry at a bare minimum a full 24 hours even if you think its dry its probably not yet. You need to be very patient waiting for it to dry. If its not dry yet it can cause inaccurate resistance readings
I got down to 0.5 to 2 ohms when coated onto a nickel strip with pure graphite powder. it is the cheaper kind too and not the better graphites.
Bende demir oksit f203 diye aldim fakat magnetit cikti bu kullandiginiz demir oksiti nereden temin ettiniz nasil alabilirim linki fakan varmi bir yardimci olsaniz
Teşekkürler.
Ben teşekkür ederim kardeşim çok incesin.
Could you use acetone instead of water? Recipes with copper conductive paint or graphite for electroforming use acetone. Presumably this evaporate way more quickly than water and allows for a less viscous liquid to spray with an airbrush.
Two things:
- the CD case cover you are using to paint over is a different one than the other one where you are measuring the resistance. Why ?
- when someone asks you why their Fe2O3 powder is not conductive you say that the good one is Fe3O4, but when someone asks you why their Fe3O4 isn't working you say that the correct powder would be Fe2O3 ... So which one ?
Sometimes I was confused. The correct one is non magnetic iron oxide. The cd case which l painted at first was damaged. But the tested one in the video had the same conductive material.
👌👍👋🙏 using a black Iron oxide powder is an excellent idea as it's more conductive than Graphite powder.
How do you get around the corrosion issues when you're using it on aluminum?
As everytime ive used anything with sodium silicate in it, it slowly just eats any aluminum in sight.
I used aluminum just for a demonstration, if you wish you might not choose aluminum to use.
Ahh yes makes sense.
I've played around with it... Can't seem to get the same results as you... However I made my own sodium silicate... And then I managed to reduce the corrosiveness of it by bringing the pH back with some acetic acid.
kardeşim yine mükemmel bir video emeğine sağlık. sanıyorum o yoğurt kıvamında olan malzeme geçenlerde aldığım çatı su yalıtım boyası. Marka olarak filli boyadan almıştım. Birde bu boya ile bir batarya yapsan şahane olur bence. bugünlerde kendi kendine şarj olan bir kaç batarya videosu izledim cayrex ve robertin kanallarında. 2cmx2cm ölçülerinde 1.7 volt ve 2.5 amperlik bir batarya yaptı cayrex. eminim daha iyisini sen yapabilirsin.Tekrardan ellerine sağlık.
Evet kardeşim o malzeme. (Su yalıtım malzemesi) bu isonem marka. Bu tarz projeler için güzel bir ürün
Sabahattin merhaba, sence kaç derece ısıya kadar dayanabilir? Yani ısı boyası gibi düşünürsek nasıl bir yol izlemek gerekir? Kolay gelsin.
Merhaba kardeşim. Bu boya kolaylıkla ısı boyası olarak kullanılabilir. Uygulandığı yüzey ısıyı kolay emebiliyorsa hiç bir sıkıntı olmaz. Boya 150 dereceye kadar filan rahatlıkla dayanabiliyor. Ben ısı boyası olarak kullanıp test ettim. Harika çalışıyor kardeşim.
Do you think your oxide iron paint is adapted for electropating (paint en 3D printed UV resin) or best is with graphite powder ?
I guess it’s adapted. However you had better to experimented it by yourself
Tekrar merhaba, birebir aynısını aynı ölçülerle yaptım fakat grafit ile yaptığıma yaklaşamadı bile. Yani kurudukça direnç yükseldi ve en sonunda iletkenlik sıfıra iniyor. Nerede yanlış yapıyor olabilirim? Malzemeleri kimyacıdan aldım, demir oksit, cam suyu ve aküler için kullanılan saf su. Diğer boya olan malzemeyi kullanmadım. Elle değil kendi yaptığım bıçaklı bir karıştırıcı ile 1 saate yakın karıştırdım. Hatta neodyum mıknatıs yaptığım boyayı çekiyor, cam kavanozun dışından mıknatıs yapışıp kalıyor. Fakat kuruduğunda iletkenlik sıfır. Deneyimlerim bunlar, sizce atladığım bir adım var mı? Teşekkürler.
Selamlar kardeşim. Aksine kurudukça iletkenliğin artması lazım. Senin kullandığın demir oksit iletken olmayabilir kardeşim. Çünkü benim kullandığımın manyetik özelliği yok. Bu arada o demir oksitin aynısınından bende almak istiyorum. Aldığın yeri söyler msn kardeşim. Manyetik sıvı yapmak için. Aldığın yer ve kimyacıyı söylersen çok sevinirim
@@joyofelectronics9782bende demir oksit f203 aldım ama mıknatısi çekiyor bunun doğru olanı nerede satılıyor bir yardımcı olsaniz
instead of using plastisizer , You could use SBR..Its cheaply available.. Added to cement for hardness and anti crack :D .. water proofing..
this iron oxide is the one sold as pigment for paint? very interesting video, thanks
Yeah, as it is a good conductor l used it as conductive paint.
This is very, very interesting and I'm interested in several oxides of various elements. The unique properties of AlO3, for example are very special. I have some discoveries. One of them is something I should probably tell you about, soon. Iron in the different oxide states and regular iron is an incredibly interesting material. Black iron oxide with a touch of activated carbon and silver nano-powder/graphene powder immediately comes to mind. I'm planning to make this mixture soon!
@@TravisTellsTruthsthat mixture will be amazing a little bit expensive though. Good luck and if you make it please share the result with us.
Great job and results!
Is this conductive paint enough durable for car headlight reflector?
Thanks. Yes it is much friend
Thanks, I'll try it.
2 omz is higher :D .. SBR helps you get below 1 Ohmz with graphite and carbon black..
Impressive Experiment.!!¨Thanks for sharing. A personal Question: Where are you from?? Amazing Channel!!
Thanks a lot. I am from Turkey (İstanbul) Best regards from Turkey
Merhaba demir oksidi nereden aldınız linkini paylasma şansınız varmi yorumlarda iki kişi almış ama iletken çıkmamış sanırım
Onlara verdiğim cevapta görebilirsin kardeşim. Bir tanesi manyetik olan o iletken değil. Diğeri manyetik olmayan iletken. Kimyasal formülünü karıştırıp yanlış yazmayayım. Manyetik olmayanından alacaksınız. İnternetten çok rahat bulabilirsiniz
If you replaced the iron with tungsten you might find you've invented a cool little makeshift heater here that could be operated with a battery
Do you mean tungsten oxide or tungsten powder brother
Merhaba, epoksi veya poliüretan reçine "sıvı plastik" ile yapılmış figürler için kullanmayı planlıyorum (elektro kaplama için). Bu boya epoksi ve sıvı plastik üzerine yapışır mı yani tutunur mu? ayrıca, sprey tabancası ile kullanılabilir mi? teşekkürler. ❤
Son olarak, su geçirmez boya diye söylediğin şey, nivea krem midir? onu tam anlayamadım, yani ürünün ne olduğunu anlayamadım. Tekrar teşekkürler.
Merhaba kardeşim bu boya her yüzeye yapışır yeter ki yüzey kuru olsun. Eğer sprey tabancasıyla kullanacaksan sodyum silikat yerine gam Arabic (Arap zamkı) kullanmanı tavsiye ederim. Aynı oranda ama kaynar suda karıştır. Ama Arap zamkı kullanırsan boyan suya karşı dirençli olmaz. Yani su değdiğinde akar dağılır. Bu haliyle sprey tabancasında kullanman biraz zor olabilir ama yine de demeyebilirsin 😊
O malzeme Nivea krem değil. Sadece kremin kutusuna koydum😊 su yalıtım boyası o. Isonem marka kullanabilirsin gayet iyidir. Ama çok koyma iletkenliği azaltır. Sevgiler
Chemical name of water proofing white powder material
Is it resin
I think, it's PVA, which is wood glue.
üstad su yalıtım boyası olarak önereceğin bir marka söyler misin?
Ben isonem kullanıyorum. Biraz pahalı ama çok kaliteli
isonem marka altında birçok ürün var. örn: ms polymer, sb süper bileşen , ms polia vb. öneriniz nedir?
@@joyofelectronics9782
üstad isonem markasının bir çok modeli mevcut hangisi olacak@@joyofelectronics9782
Sir, I've ordered a couple 2.7 volt capacitors (100 farad and 3000 farad) to study capacitors while I learn to make them. I learned small voltage supercaps store the most energy. My question is, is there a best practice for fast charging of a single cap. It draws amps and I'm hand limiting the current but I read that they can be charged very quickly. How can I know it's maximum safe charging current? Your capacitors, too. How fast can we charge these electrolytic supercaps?
Supercapacitors can be charged with the current up to 100 amps. Anyway it’s difficult to find that much strong charger so you don’t have to worry about the current but voltage while charging the Supercapacitor
Amazing 👏
I got a capacitor you couldn't believe, now. It's 4.3 volts, 4200 Farads. It stores energy with zero losses but it's not rated for super high current. It's more like a steady battery. About 4 Amps current. It's the size of my thumb but smaller... apparently, these aren't really available to the public.
@@TravisTellsTruthsprice of 4000 f
Merhaba kanalinizi yeni kesfettim sanirim sizde türksünüz ısı boyası ile ilgileniyorum fakat internette bu konu hakkında bilgi veren yok ticari kar amaçlandigi icin kimse formul paylasmiyor sorum şu bu teknik ve malzemeler ile ısı boyası elde etmek mümkünmü birde kullandiginiz demir oksitin moleküller formulu f304 mü birde beyaz olan malzeme nedir ortalama 1 kg icin gerekli olan miktarlari yazarmisiniz tesekkur ederim
Haklısınız kimse formül bilgisi vermiyor. Bu yöntemle yapmak mümkün tabiki. Manyetik olmayan iletken olan demirtozu kullanacaksınız. Beyaz malzeme ise su yalıtım boyası. Isonem markasını kullanabilirsiniz. Saygılar
Demir oksit fe203 aldık ama iletken değil nerede yanlış yaptık yoksa sizdeki bileşen farklimi
@@yandantv7393 Fe3O4 alcaksın kardeşim
@@joyofelectronics9782 In an other comment you said that the wrong one is Fe3O4 and the good one is Fe2O3 ... So which one ?
Bu iletken boya lehim tutuyor mu? Deneyebildin mi.? İki siyah alan arasına led lehimleyip çalıştırabilecek miyiz
Can we solder an LED between two black areas and turn it on?
Merhaba kardeşim. Bu boya lehim tutmaz. Ama direnci çok düşük olduğu için neredeyse metal gibi her devrede kullanabilirsin. LED vs kolaylıkla yakarsın. Boya ayrıca ısı boyası olarak da kullanılabilir. Sudan etkilenmez üstelik.
@@joyofelectronics9782 Yanıtın için teşekkürler. Tutsaydı bakırlı plaka eritmek yerine her hangi bir yüzeyde devre oluşturmak için bunu kullanabiliriz gibi bir şey gelmişti. Özgün paylaşımlarda bulunuyorsun. Paylaşımların için ayrıca teşekkürler.
@@argedoargedo7834hiç bir iletken boya lehim tutmaz. Tutsa süper olurdu 😊ama devre elemanlarını sabitlemenin başka yolları var tabi😉 sıcak silikonu dene sabitlemek için
Brother I have a capacitor roller machine can you tell me how to make factory like electrolytic capacitor that I can use in any electronic device that have electricity capacitor
Well brother l have a video about that you can check out. However it requires a professional producer and process
Ok bro thanks and brother I see your homemade resistor video can I use homemade resistor on sstc Tesla coil
@@user-wv8uk5fd9t sure
مرحبا . اكسيد الحديد الثنائي يتأكسد بالهواء ويتحول الي اكسيد حديد ثلاثي .
can i put it in a marker so that i can just write it
In that case you need a suitable tip for your marker
I haven't seemed to get black iron that matches this level of conductivity. I bought magnetite (fe3o4) is that the wrong stuff?
Yes it is the wrong one. Fe2O3 is the correct one.
@@joyofelectronics9782 thanks! At least I can still make magnetic slime or something, haha. Maybe magnetic blocking paint! Walls may be dangerous in our homes... no one cares enough to study it very much. The AC induced voltages and magnetic pulsing at 50 or 60 hz. I got some calcium copper titanate I think it's called. Ultra strong dielectric material as well as titanium oxude/dioxide. These are very special materials. I thought I'd share this with you. Oxides are really interesting. I'm very interested in your special lead acid battery.
@@joyofelectronics9782 what about copper and/or silver nano particles in a alkaline electrolyte? They are more stable in high pH. More conductive than any oxides. But I'm very interested in your exact source of black hematite powder, your paint conductivity is extraordinary. Thank you.
Is Fe2o3 ferric oxide? Red-ish in colour. Can i use thatt?
@@joyofelectronics9782 In an other comment you said that the wrong one is Fe2O3 and the good one is Fe3O4 ... So which one ?
Kindly, can this be used on heating film, and at what volts and current did it take burn out the conductor? Thank you.
Yes, it can be used. 12 volt 3 amps will burn it out
Thank you.
No you must use organic witch is carbonized by low heating
This provides best results
What is the waterproofing paint name?
It’s isonem a Turkish brand. But you can use any brand available in your country.
Black iron oxide is said to be an insulator. How can it be used as an conductive ink?
There are two type of iron oxide. The Fe2O3 is magnetite it’s not conductive but Fe3O4 is a good conductive material
About how much iron oxide would you estimate for a gallon of paint?
3/4 gallon
According to google the most electrically conductive material is graphene. Can I make graphene from powdered graphite and use 35% hydrogen peroxide to make good graphene, will that work well? Thanks man
Yes graphene is the most conductive material but it is very expensive. It’s also different to make pure graphite if you can make of course you can use it. In my first video about conductive paint l used that method. You should watch it.
I think I already watched it, I'll go find it and watch it again, thanks.@@joyofelectronics9782
Hocam alttaki yorumlardan birinde fe203 iletkendir yazmışsın birinde fe304 iletkendir yazmışsın hangisi doğru?
Yanlış olmuştur kardeşim Fe2O3 iletken olan. Magnetit olan iletken değil kardeşim
@@joyofelectronics9782 bugün fe203 Demir oksit aldım denemeyi yaptım ama sanırım fe304 olan bu çünkü mıknatıs çekiyor ve iletkenlik sıfır.İletken olanı hiç bir şekilde çekmemesi lazım değil mi ona göre iade edeyim.cevaplarsanız sevinirim.
@@kedigercekleri evet iletken olan mıknatısı çekmez
Merhaba demir iksidi nereden aldınız linki varmi bende aldım fakat iletken gelmedi magnetit geldi
@@kedigerceklerihocam merhaba bende aldım fakat magnetit çıktı siz tedarik edebildinizmi
kardeş deionize suyu nerden tedarik ederiz, bu arada ingilizcen güzelmiş
Kardeşim. Benzinliklerde saf su diye satılıyor. Onu kullanabilirsin. Teşekkür ederim.
musluk suyu kaynamış soğumuş su vs. kullansak ne gibi bir dezavantajı olur hocam@@joyofelectronics9782
hocam şimdi benim klavyemin filmindenbazı yollar kırık bu boyanın yapışmama iletmeme gibi sorunları olurmu@@joyofelectronics9782
even when it gets super heated it can not burn away. so there is something wrong.
No it means that it’s durable against heat. If you talk about the second part of the paint, when l heated it the paint broke so disconnected (you can understand from the internal sparks) that’s the reason.
pas sure que les resultats soit pas fausser car il touche les fils en meme temps et le corps humain cree une resistance
Turkun turkten baska dostu yok gardas nereden bulacaz bu iletken demir oksiti bir yardimci ol :)))
Kardeşim. Google toz demir oksit yaz sonra alışveriş sekmesinden bak orada bir sürü çıkıyor. Onlardan formülü Fe3O4 olanını sipariş ver. Dışarda mağazalarda bulmak çok zordur
@@joyofelectronics9782 hocam daha önce iki yorumdada fe203 demişsin bizde onu sipariş verdik 304 eminmisin son kararinmi:)
I tried the same but results are far differ...any suggestion ???
There could be many reasons but probably you put excessive binder.
@@joyofelectronics9782 Thanks for reply, I will try it again.
Can I get your mail Id so that I can share the results as well.
It's not a fake video I can assure you... I make conductors using graphite and iron mixed with polyurethane based varnish(resin conductors) mine also measure around 3ohms per cm...
Thanks
Ciao sono Roberto purtroppo non conosco l'inglese puoi gentilmente scrivermi gli ingredienti così posso fare la traduzione in italiano
Grazie
I am reading that graphite has much better conductivity than iron oxide. Why would it work better for paint?
It’s nanoscale. Nanoscale graphite is very very expensive
@@joyofelectronics9782 ah OK, that makes sense. Do you know where I could get bulk quantities of this for a fair price? Seems kind of hard to locate
Yorumları tek tek okudum yorumların yarısında iletken olan demir oksit için fe203 demişsiniz bir çoğunda fe304 demişsiniz sürekli aynı soru sorulmuş her defasında kafanız karışmış.Doğrusunu yazalım insanlar uğraşmasın fe304 iletkenlik özelliği olandır.İçerisine koyduğunuz yalıtım boyasını (plastikleştiriciyi)çok kullanırsanız iletkenliğiniz o kadar azalır..
Aynen kardeşim sağolasın yardım için 😊
how is this so loud LMAO
Do you have contact email. ?