carb clean husqvarna yth2454 part 1
Vložit
- čas přidán 8. 03. 2019
- trying to do a carb clean on the husqvarna yth2454 , tried to do a quick an dirty carb clean that i thought would work it didn't so.. it looks like i will have to pull this carb off completely in part 2 and fully clean it.
- Jak na to + styl
Just wants to let you know.I followed your video clean my carburetor and got my lawn mower.Up and running again.Thank you very much
Thank you I appreciate it I know some others probably had some better videos than I did, but I am glad to hear it help to get your machine running again
Couple things before that carb comes off again. 1: pull plugs to see if they are wet and getting fuel. Smell exhaust. 2: Pull fuel line off after pump/ filter and see if it is delivering respectable fuel when engine cranks (pumps using vacuum impulse from engine.) 3: See if it will run with starting fluid. Nice job on the video, thanks!
Thank you. yes I still have it, I got to do work on it still probably the fuel system again but I will try these steps
Thanks for this video, by following the instructions I was able to clean the carburetor and got my mower running again.
Your welcome.. I'm glad my video helped you out there maria
You sir are the man! I have a similar model Husqvarna and thanks to your video I was able to get it working again. Much appreciated!
thank you very much I'm glad my video was helpful to you
1st question, and more of a suggestion to other's who own this mower. USE ethanol FREE 89 octane. Always avoid ethanol gas in small engines. Get that crap out the mower first, unless you use it throughout the winter the ethanol breaks down.
true
The spark tester only shows if the coil is putting out some high voltage. If the plug’s ceramic insulator has leakage to ground, it will not test for that. The easiest way to test for bad plug is with a known good plug installed in place.
That is good info thank you sir
@@Turningwrenches85, thanks for the reply.
I’m only seeing it through from my formal Electronics Theory training from 1973.
@@jmikronis7376 that is ok i am learning new things in my small engine journey i appreciate that alot
Thank you man !
You're welcome sir
Nice video typical bs that happens to me too like dropping the jet under and the bolts being really tight.
Appreciate it I know back then the video quality wasn't that good gotten a Lil better hopefully I do another one of these again I film it better
Preeciate this man!
Your very welcome
check the antidesiling switch under carb plus see if there is 12 volts they have been know to stick an keep the carb from getting gas
I will I still have this mower I haven't sold it yet . I'll check it out this year and check that to be sure.
Will the spark tester light up if the spark plug is bad?
From what i seen or heard it wont lite up
Seems the choke cable isn't pulling the choke far enough, common problem with them, they either stretch or slide, loosen the screw slide cable and start it up
thank you i appreciate it 🔧
Do you check if gas is in the tank ,
Back then I think there was gas in the tank then
My issue is fuels making it all the way to the carburetor however it fills up the bowl doesn't really want to go anywhere else in the carburetor though I've checked all my air portsview reports everything is clear it's just nothing is cycling through I'm starting to debate if it's a vacuum issue however no vacuum issue is totally apparent to me however he will still not getting to the other side of the carburetor somehow
Did u check the fuel pump also Maybe a issue there.
It looks like the float is sticking. It smoked out the exhaust she you tried to start it. Now I will watch the rest or the video...
Yes at the time it prob was sticking
Safety switch under seat mine did same thing
Got to love those safety switches
Prime it with a little gas in the intake to see if it will fire before you do anything else!
Thank you will do
my riding lawn mower is the only way to fire DO YOU KNOW WHY THAT HAPPENED? please let me know
check the full tank and the full filter....?
Where is part two?
czcams.com/video/04TUeRrxfYg/video.html
Any part 2 yet
czcams.com/video/04TUeRrxfYg/video.html
hm. i know nothing about auto/engine mechanics. can't start my own yth2454. so i guess i'll be watching this and the next closely.
Well hopefully my videos on it . will help u out
Part 2???
czcams.com/video/537ZObmSPDg/video.html
Give that camera a wipe next time bud. Thanks for the vid.
My apologies the camera then i use I think was an old Canon
dony boy,has a choke adjustment video,may help
Yes i have seen that video he did on it. It was helpful at that time
Dude you posted a video with “Quick” in the title that is 48 min long as part 1 wtf
Yes back then it took longer than I thought
Yeah instead of getting right to it and getting it done , they talk through 75% of the troubleshooting
Put sea foam in the gas an run dry before storing
That is also good advice also
fuel pump has a broken tube on it check the fuel pump
Ok I will do that
The fuel pump's little vacuum hose has to be the lousiest little piece of rubber. I have had to replace mine every season.
Check the fuel pump
If it has that ploblem . I will check the fuel pump thank you
This was hard to watch
I apologize at the time I wasn't using a very good camera I think I was using my phone at the time
What a waste of carb cleaner.
Probably not my best video on the carb cleaning on this Husqvarna tractor carb but it was a learning experience to get better at what I do
Dude, I was going to make cookies on that cookie pan😂
I'll clean it off for you lol