Renault Clio SERV and Airbag fix and repair
Vložit
- čas přidán 10. 09. 2024
- Quick video on how to repair the very common fault on the clio causing the airbag and serv light to come on.
Im still not great at filming and editing but hopefully this is ok.
Dont worry about the people who have left the thumbs down.
Its just greedy mechanics getting upset that the info is there to stop some people getting ripped off.
I used 2 resistors (3,9 Ohm, 5 W) to short-circuit the Yellow plug behind the wheel. It worked 🤟
I am sorry, i dont understand. Which color cables need match? May you write?
Great Help thank you removed the connectors under seat sprayed with contact cleaner now all good no lights cheers
Thanx mate... I have, until now, shaking the wire under the passenger seat, whit my hand.. But now it doesn't work anymore.. So I'm gonna use your trick.. Thanx again..
I have the same problems but when I look under then I have 3 wires but you had only 2 ?!? Witch colors did you connect together????
Hope for your response
Did you find the solution? I have several wires there but the video doesn't explain which ones we need to cut.
Cheers dude excellent video, can't believe Renault were stupid enough to put drinks holder above air bag module!! 🤣
Just what I needed. Thank you. Well presented video.
many thanks for your video&advice, i have same problem with kangoo 20041.5 dci,
Hi, my drivers seat air bag had actually gone off in a little hit but will doing this turn the warning lights off? If not will I have to replace the seat or the air bag in the seat with the seat belt tensioner?
Lewis Hall no, you’ll need to replace the airbags that have gone off and replace the airbag ecu module, which is underneath the cupholder. Once an airbag has gone off that module remembers that airbags have been deployed and puts the airbag light on, so you need to replace it
I took my 2002 Clio to my nearest Renault dealership to deal with this problem, and they can not figure out what the problem can be....The ask me to change the module and other costly units and the problem is still there....I have booked the car for the third time and they have done nothing to it.....Should I have to contact head office in France or what?
Very helpful, i shall give this a try! Garage advised me to replace the seat belt pretensioner but i think its the connectors. Thanks for posting.
Superb. Thank you very much.
Do you connect blue to brown wire? I've watched it several times can't work out what color wire you directly connect? Can someone explain plz?😂
Same here... need help plssss
Spot on mate will do this with mine tomorrow
Would it be the same with the Renault modus
is the soldoring hard to do? This is great video. Well done and thank you so much :)
Thanks mate, appreciate the help!
Thanks for the video I was very helpful 😉👊
Your Welcome
I would like to see how u installed your cone filter please see urs is done different to mine and looks a touch simpler
Shaun Russon happy to. Give me a few days and il make a video. Subscribe and you will ne notified soon as its online. Thanks
Can any one tell me where the passenger airbag sensor is on a Renault Clio? would really appreciate it!!
Under Passenger Seat
Thanks very helpful video. I don't know if this is a done thing, so I'm going to ask you anyway. Seem like a nice chap. I have this problem on my clio,I used to just reach under the seat and waggle the wire's a bit,bingo!not anymore,ill do as you show. But since cars last serv, February 18, the cars gone crazy. There is power getting to radio/cd but won't work,no CD or radio,confusing. When I try to windscreen wash the front screen the water sometimes sprays the front sometimes the back!!mad!. Yesterday turned on lights, when I indicated the blue high beam light flashes on and off. When I looked at the front of car the indicator bulb is glowing and one headlight is brighter than the other. Also when switch lights on low beam I get the indicator click click. Also the indicator arrow light in dash glows?! It's all gone potty. Don't suppose you can advise me please? Many thanks. Jay.
That’ll be water ingress and corrosion on the fuse box area also causes immobiliser problems
Why you don't try before some electronic spray ?
RC Copter the. Connectors themselves become stretched and brittle inside so electrical contact cleaner doesn't help. Thanks
I went to the garage with the airbag and serv light being on for straight 9 months and told me i needed to replace the squib
Yep the garage will always take the expensive route.
Worst thing was i had to get the part from the dealer which cost 170 plus labour when i could have gone to the scrapyard or looked on ebay
@@JU0800 which part was it
@@mariofranse1088 steering wheel stalk wiring
thx