BMW E39 Engine Stalling Fuel Filter Replacement 525i 528i 530i
Vložit
- čas přidán 5. 09. 2024
- GO TO MY WEBSITE AND BMW FORUM !!!
www.nathansbmw...
CLICK HERE TO BUY YOUR NEXT CAR PARTS FROM MY AMAZON STORE
www.amazon.com...
www.goldeagle.com
Here are some Amazon links to parts mentioned /used in the video Mass Air Meter M54 M52tu amzn.to/2wvRTTx
New style fuel filter amzn.to/2wyrhQ9
Idle Control Valve ICV amzn.to/2vCz0PK
Throttle Body Boot Will NOT fit 3.0 engines amzn.to/2ezQ1Th
nathansdiygarage
/ nathansdiygarage
/ nathandiygarage
To see my other Channel "Nathan's MRE Click Below
/ @nathansmre
To see my other channel Nathan's World Click below
/ @nathansporscheworkshop
Send stuff to my PO box for products you want reviewed or for a shout out on the channel,
Nathans DIY Garage
PO BOX 115
Altenburg MO
63732
For Business Contact :
Nathan's BMW Workshop
Po Box 115 Altenburg Mo 63732
nathan.youtube@yahoo.com
My 540i has 385,000 k on it. Now and again it stalls, then other times it will run fine. I considered changing the fuel pump, but I might pull the filter out and see what's inside. Apart from this it runs extremely well. Thanks for the video.
hey i have a 528i 2000 and its has a steady 4&5 misfire i need help finding out why i replace bunch of parts and sensors
had the same problem fitted new airflow meter all fixed e39 523i
Hopefully it fixes it, I will have a update video this week when the maf comes in
What's the 3rd line for that's not attached to the filter but held up by the same hangers (the one closest to outside of car)?
Thanks for all the informative videos. Which BMW application told you about the airflow issue? I'm just now starting to learn about INPA, ISTA, Rheingold, etc. But not sure which of these applications can indicate problems before they turn into codes that can be read by basic OBD scanners. TIA!
Had same issue. Turned out to be cts
Coolant temperature sensor.
Did you find the issue?
A failed fix is still a good experiment. Great information.
Hey I have a 2003 E39 530i and my gas gauge keeps playing going up and down and can’t figure what it might be? Any idea thanks
I'm pretty sure my fuel filter in my 540 is the original one from 97' 😂 Haven't had a problem with it though and gas here in Sweden is usually of very high quality, but still, that old fuel fulter gotta go soon.
Car has 200 000 km on it.
J Gripen you should change it, eventho it runs fine it strains your fuelpump. You'll possibly notice some performance increase
So this happened to my car today, thinking about the filter. The car started but it bogged down and died, cranked but didn’t start for a while, went and disconnected and reconnected the fuel pump relay in the trunk and it started right up for 15 seconds and then it died again. Now it starts but it won’t stay on.
What was the issue
fuel pump :)
hey bro my E39 530 5speed engine light came on i checked the all the hoses ran smoker no leaks i change the oil Separator now this is the next job i ordered manfilter im hoping this will fix the problem scanner showing code P0313 Misfire Detected with low fual the two other codes says manufacture control P1083 P1085 driving me nuts what should i look for ?
I like your Sun Glasses Nathan.
Hi mate,
Due to you experience.I own a 535i e39 2003 it seems to change up gears and change back down under light load,up a hill it feels like it can't deside what gear to be in.
I have booked it in to check auto fluid level and plug change ect any ideas ?
Change the fluid and filter
Awesome Video Nathan, I repaired my fuel injectors and I started my car up. My car sounds like a Shelby Cobra (magnaflow cat) but my car kills out around 500 RPM's. Ive checked my MAF, ICV, fuel rails, vaccume & leaks on '97 540i automatic.
I am very lost at what it might be, any suggestions will be very helpful.
Catalytic converter?
Agreed cats clogged.
got a few issues. BMW struggles to start. then it starts. Switch engine off and struggles to restart but it does after about 10 secs. then another issue. Key in Ignition. car starts up good. run for a while. turn off. key out. key in and well shit the system livens up and ffails to turn over let alone crank. Repeat this several time in 1 min then eventually it starts to crank. can you help . 525 TDS, 1997 can just purchased with 200K kms on the clock and no history at all.
I changevevery 3 ...4 years ..it is easy job and cost almost nothing
I have a 525i 2005 and I can't find filter
Is it hard to diagnose MAF? Will it throw a code to point at it easily?
Unplug em and go for a drive. If there's no difference, mafs are bad
Guten Tag. Bitte lassen Sie mich wissen, nach der Reparatur der bmw e39 535 und vanos, gibt es Fehler von 75-76-77 und DC
Ich spreche kein deutsch
Clean the theotthle body plates as well
I'm twice as old....when I have a car with this milage/age, I drop and clean the tank and change all filters---then check operation of injectors 15 yrs of sluge in tank
Hi.
Is it recommended to replace the fuel filter when replacing the fuel pump?
Thank you
I personally think so, fuel filter is cheap, and if it is clogged, it is going to damage the new fuel pump.
Hi can you speak about e34 e34 535 engine
My e39 cut off on me twice. I had like a quarter tank and it cut off. Is it the fuel pump and filter ? I was on the gas and it wouldn’t accelerate. What do you think ?
Did you figure out this problem? Was it the transfer tube in the tank?
its the pump on the ride side of the car when it dies at 1/4 tank
Open secret to not to let your E39 go below quarter tank! It’s like Mogwai at midnight…. Gremlins!
Unplug maf. Ride out !!! 🤙🏼 not the best thing but it’ll get you by for a quick min till you can afford a new one
Siemens air mass usually lasts for me 1year and 2 months only then car acting like a hell
Then I bought another one it's ok till now 😁
What was the end result of this vehicle? Are you able to drill down the issue and fixed it? I would love to know the conclusion. Thanks
Tbh man this guy is a hack of a mechanic. He uses cheap parts & then goes on a rat chase with other issues and the customer probably is left with an insane bill. I have seen both fuel filters & ICVs break on these cars, so for him to say "I've never seen these fail" outlines his inexperience with these cars. It's a red flag when people talk in definites.
crank shaft sensor
"cramshaft." HAHAHA @Erickthepro 2008
@Erickthepro 2008 and, to be helpful maybe - I was having a problem with my e38 where it would randomly sputter and die, usually while sitting and idling (several times at stop lights! O_O) and sometimes it wouldn't start. That's about all the details I remember. Did some digging on bimmerforums and came across a guy who had the same symptoms to a "t" and he swore that changing the crankshaft sensor would fix it. So I did, and - it did. CRANKshaft sensor (the much much easier one to change on that car). Fixed it excellently. No more idle problems, no more sputtering and dying. That was an e38 though. 1995 740 to be precise.
Can u work on my bmw?
fuel sender
Wow this crap was so dumb bruh how am I supposed to change mines when you fast forward the crap out of it hahahahaha omg smh 🤦🏽♂️
khk
Lawd Fadda, I just can't resist!....... Right from the start, this was a very poor video of continuous events and failures! "seemed entirely like guesswork and trial an error troubleshooting! Change anything and everything until we get it right! But,>>>>>>>
It brings me back to something my father always said to me....The more bells and whistles you have on a car, the more that can go wrong! "IN OTHER WORDS, KEEP IT SIMPLE"! Fuel Filter?? KEEP IT BLOODY SIMPLE!!!!!!!
As for your promotional products, well you do that as much justice as you do the entire video. Shameful in my opinion! The least you could do it look up their website, learn what they have to offer and the benefits of each item. You could not even spend the time let alone explain and detail their product!!
If I could give you a 1000.00 dislikes, I would!