How To Fit A Crank Sensor And Fix Error 21 & 22 On All Carrera E-Bikes
Vložit
- čas přidán 28. 08. 2024
- This is the first video I am posting of my series showing you how to fix everything on your Carrera E-Bike. In this video I show you how to fit a new crank sensor on your Carrera e bike. All manuals are linked down below. If you have any questions leave them in the comments and don't forget to subscribe.
E-Bike Manuals
Carrera Vengeance E - drive.google.c...
Carrera Subway E - drive.google.c...
Carrera Crossfire E - drive.google.c...
Thanks For Watching.
Hi mate,looking at your videos you don't seem to have been on here for ages. Just wanted to say a MASSIVE THANK YOU. You have absolutely saved the day with this video. I've just followed your instructions and I've sorted my bike. I can't tell you how happy I am it's fixed. This video was invaluable and so brilliantly done. I hope you come back and do more of anything else you know. You're a brilliant teacher. Thank you so much buddy ❤
Not all heroes wear capes... They make CZcams channels!
Thank you very much for making this video it was very simple to sort out the issue 😊
Mate, your small channel has done me a massive favour. I order a new sensor but it was the wrong one. I got a 4 pin rather then a 6pin. (Ordered from eBay for £33) ended up buy thing another for the same price. Now I got a 4 pin and an 6 pin
How does the sensor work? How does it sense torque and is it possible to change the torque at which the motor starts? Is the motor control proportional to torque or fully on or off? One of the best videos I've seen.
You’re a life saver mate,
I’ve had my carerra Vengance E-spec sat in my shed for a whole year, because I had stripped my crank arm pedal thread.
I re tapped my crank arm, and then discovered that I had “error 21” on my monitor!
Thanks to you, I could confidently locate the source of the problem (the cable of the Torque sensor was cut by the chain slipping off) buy a replacement part, replace it and get it up and running again!
Thank you so much, and I wish you the best, mate ❤
Thanks I really love hearing that I helped. I really appreciate the comment.
Excellent video
Brilliant video mate.. subscribed and liked for future reference.
Josh, great first two videos on the Carrera ebike range. Looking forward to the rest of the series.
You my friend are a true hero, excellent video. ❤
Hiya great video. I've got a couple of questions. 1. Can the bike work without the PAS sensor? 2. Is it possible to remove the speed restriction for off road use? Thanks Scott
11:23 - the sensor should spin freely? My disc spins freely when my sensor is not screwed in but only spins a small amount when it is screwed in properly?
Hi is the torque sensor and crank sensor the same thing I have error 21 showing on screen but when I've looked it up it says torque sensor problem thanks
Brilliant mate just the video I needed, can you buy sensors online or just Halfords?
I had the 21 error but now the error is gone. I washed bike as had a lot of sand. The power sometimes is engaged and other times I'm getting no power or error message. Any ideas sir?
My carrera vengeance fails all the time. It's frustrating. Great bike when it works.
Hi, great video just what I was looking for, can you make a video on dismantle and cleaning crank chainring, thanks
I will give it a go!
Excellent l have this problem l change thank you very helpful.
Excellent video, very informative. I have 1 question where do you get new sensor from ? Thanks
thank you for this! saved me a fortune !!!
my one was hanging on by the wires for miles before i notice it was broke then had to go another 20 miles ha, the broken bit of plastic cover was still in the frame,, lucky,, and i ended up gluing it together, but after watching this i might replace it,
Amazing!
Thank you for this brilliant video . How the speed limiter can be removed os increase the speed limit, eighter by the senssore on through the ICU
How do you do that ?
Hi , my old Vengeance has no error codes but power keeps going on and off to the wheel so would that be the crack sensor ?
Thanks
I have a carrera subway e and cant even find the torque sensor im so confused as my walk assistance works perfectly but when pedalling nothing happens. I dont have anything on the pedals only a wire connecting the motor to the bike on the back bracket. Please i need help with this im so lost rn and very frustrated as i just want to use my ebike for uber orders but cant because of this annoying problem.
Could I install a 6 pin sensor into a 4 pin sensor sprocket unit ? One unit says 18 on it and the other 21 on the part number so I'll be installing a new sensor into an older front chain set will it work, so the old chain set was made for the 4 pin connector sensors , the bit on the back with the green bits on if I change all of that and fit the 6 pin sensor into it will it work OK?
Can you change the sensor for a different sensor because halfords dont have anymore the original one
Halfords are able to get any sensor and if they say otherwise you are likely speaking to someone who may not be clued up on them
Where can I order a new sensor from pleasantly. Link would be very helpful
hi, i think you have just saved a bike and my son! i have a 2016 vulcan e version i (ebct16), my son has managed to break the crank sensor but I cant find the connector on the bike to plug the replacement crank sensor into. only a small black male connector spare inside. is this the one?
Bike keeps holding back then motor kicks in especially going up bank. Any ideas.
Hi do you know the size of the 3 screws? I've lost mine... thank you 😀
How do you make the bike faster - removing the speed lock like?
I’m dying to find the answer to this question
@@graysonwilde3983 I realy trying to find out if it's possible to increase the speed by modifying the sensore or
When i replaced the sensor, i did a test pedal. I heard a clicking sound. Found that in 3 areas it was making this sound crossing it. I stripped the whole crank down, and made sure absolutely everything was perfect. I mean everything.
I put it back together, and the sound is happening again. Then after a few test pedals, it jams. I strip it down, sensor is snapped. Do you know what could be causing this?
It may be that the spinning plate inside the chain set where the sensor mounts is sticking which is causing the sensor to rip. If you take the drive side off and try and rotate the inside of the crank it should move freely from the rest of the crank assembly.
@@joshjones6501 I ended up finding out eventually haha
I used 2 different size of screw putting the sensor on, causing it to catch. One of the screws had an integrated washer. Live and learn lol
On my carrera e vengeance the stop on the bike for the crank sensor is on the side , that normal or should it be at the top ?
Hi I would like to know is please about every connector on the controller board is please and what parts of the bike do they connect too
Do you need the cover or can it be used with out ?
I've got the crossfire e and I can't release the battery
Hey mate where can i buy the sensor please
Can you send a link to the sensor
Iv just removed mine but as i was taking it out the two top black prongs (which enter the crank) moved a few mil forwards , would this mean the sensor won't work ? Iv pushed both the prongs back .
My sensor wire has snapped and the sensor cover can you get those too
Lovely tutorial m8, thank you
Its not a electric Q, but what size tyre have you got on the back? i was thinking of trying a 2.4? but the gear cable looks like it would rub?
I have a 2.25. The biggest I have seen is a shwalb hans dambf Tyre which was a 2.35 Tyre. That required me to zip tie the cables out the way however the Tyre cleared no problem!
I have a Carrera vengeance Espec and i have a flashing high light on my control panel. And the motor does not work when i am riding . I have been told it could be the sensor. Do you think this is correct.
What is the name of the ring that stop sensor to move please.many thanks
Can I replace the front sprocket on my Carerra crossfire marl 1 model .
@josh Jones
Hey mate...I've got a problem with the torque sensor on my vengeance E spec and am not sure if a wire has been completely cut or if its supposed to be so...also the sensor has a big chip out of it..wandered if u could be of any help???
Is there a vid with sensor changing thats below the middle of cranks .
It should be the same process unless it’s a bottom bracket sensor. Have you got the old subway or crossfire e?
at least a year after this video has gone out im looking if anyone knows where i can get a replacement from, some how managed to cut my sensors cable in half. Thanks in advance.
Hey mate I have carrera Ebike I have changed my sensor now I have an error 21 on my display what’s the problem ?
I work as a halfords bike tech and this is not entirely true… it won’t be the same sensor each bike listed as the plug connections are different.
@Daniel James Audio Ltd it may be possible I’m still trying to learn that myself, there’s an rpm sensor on the motor board that I’m gonna bypass and see if that gets any results….
Hey thanks for the comment Carl, what Halfords do you work in? And there are only 2 different sensor types within the Suntour HESC systems. They did a bafang powered vengeance e in 2017 but that was discontinued years ago. And with the speed hack I’ve wondered that myself however there is no software plug in I am aware of that would allow us to download a faster version of software and I can’t find any suntour ECU which is manufactured with a faster speed already set. The rpm may be a good shout. The only other thing may be adding a throttle by slicing in to the sensor and soldering the connectors of a throttle but even if that engaged power it would probably still top out 15mph.
Hi mate is the crank sensor supposed to go around the full crank or is it supposed to stay in the same position as I just bought a new sensor and it’s not working because it’s going around the full crank
It should always stay in the same place against the black locator
Hi. I have tried to fit a new sensor because my old one has snapped but the problem i am facing is that after i screw in the new sensor, if i try to move the pedal then the pedal doesn’t move.
What’s the blue or green stickers mean ?
If u mean the dot on the crank sensor probably a Bach recognition way during manufacturing or something.
Brother I have error 21 how much Halford will charge from me to fix?
Hiya pal where can I get a replacement sensor from
Hi i have carrera ebike . When i padel it on eco mode then i feel strange vibration from the crank sensor . Anyone can tell me whats wrong with my bike ?
where can you pick up these sensors?
eBay
I’ve got a 2.0 vengeance and the battery won’t come off it, it turns but doesn’t take the battery off it
Turn the bike upside down and pull it down
Im getting error 43 turns on but no pedal assist 😭
14 nm is not very very tight
mate how the fuck do i get the wires out on the carrera vengence E 2018