hello I'm from Indonesia🇮🇩, very lucky to meet you, even though we are from different countries🌏. your video work is very beautiful, I always see it from every message that comes in, I really appreciate your work, hopefully we can meet again in the latest video, .❤
Hi Phil, thank you mate. I'm just hoping it all works 🤣🤣 Can't wait to get it up and running. A lot depends on how long it takes the media to come. Thanks and take care mate, Terry.
Another successful build makes you wonder how they justify the shop brought prices with a bit of time and effort you've saved hundreds looking forward to seeing it up and running and will you be releasing plans
Hi Dave, and thanks mate. I must admit, I'm looking forward to getting it up and running. Once tried and tested, I will do plans for it. Thanks again mate, take care, Terry.
Hi Leon, thanks mate, really appreciated. It does look ok, I just hope it works 🤣🤣🤣 Must admit, I am pleased with it. Just gotta get it installed now. Thanks again mate and take care, Terry.
Yet another great build Terry. 👏 Just goes to show with a bit of patience and knowhow you can save thousands.💰 You could end up with something just as good if not better than shop bought and have pride in your achievements. Well done 👏
Hi Allan, thank you for your confidence mate. Must say I have my fingers crossed lol. Can't wait to get it in and running now. Thanks again, take care, Terry.
Hi mate, The spray bar is the star attraction of the build lol. Hope you put your name on a boat, I could do with a holiday lol. Thanks mate, take care you two, Terry.
You've done it again Terry the shower looks totally awesome and just so professionally made. We'll done to mountaintree for sponsoring you with the media. Stay well.💯🙂
Thank Dave, it's always appreciated mate. I am pleased how it's turned out, just hope it works 😂😂😂 It is good of Mountaintree, but it depends how long it takes to come. I might have to use something else for now. Thanks again mate, Take care, Terry.
Hi Lau, and thank you, it's always appreciated. It's free, so I thought I'd give it a go. Trouble is, it depends on how long the media takes to arrive from China, I might have to use something else for now 🤔🤔🤫 Thanks again, and take care, Terry.
Bit of a Bon Jovi guitar rock vibe this week at the start Terry. You have made a beautiful job of that Mate, very very impressive . I wouldn’t be too worried about the lid at the back, good use of available resources. Hope the install goes ok once the media arrives. Lovely addition to your filtration 👍
Hi Paul, thank you. You can't beat a bit of Rock lol. It's funny, but the back of the lid being in 3 pieces is bothering me lol. I'll try not to think about it lol. Waiting for the media to arrive, will hold things up a bit, so I might fit it anyway. Thanks mate, really appreciated, Terry.
Glad you enjoy the videos mate, much appreciated. I am pleased how it's turned out. Fingers crossed now that it works lol. Thanks and take care mate, Terry.
Thanks Vince, much appreciated mate. I just hope it works 😂😂😂 🤞🤞I'm going to try to get it fitted in the next week or so 🤞🤞 Thank again mate, Take care, Terry.
Hi Dave, and thank you. Waiting for the media to come from China will hold things up a bit, but I think the wife will find me plenty to do lol. Take care, Terry.
Loved the video yet again mate, looks like you did a really nice job. So pleased you got the sponsorship for the media, every little helps 😁 Really looking forward to seeing you plumb it all in and firing it up. Take care and thanks for sharing.
Thanks mate, waiting for the media to come will hold things up a bit, but not to worry. If the weather comes better, I might take the bakki river out and start getting the filter house ready. Thanks again mate, take care, Terry
Hi Andy, and thank you mate. I am pleased with how it's turned out. Keeping my fingers crossed it works 🤞🤞😂 Had a good day here today, had a bit of sunshine. Tomorrow will be a better day mate, take care, Terry.
Hi Phil, and thanks mate. The lid is bugging me a bit having the back made from 3 bits. Bet I end up ordering another sheet of PP lol. Take care mate, Terry.
Brilliant job Terry my only criticism would be the size of the outlet to get enough flow through the shower i have a 4inch pipe out the bottom of mine to get a good flow but cracking job on the build
Hi Lionel, and thank you mate. I've gone with the 2" because I'm hoping to connect to the existing pipework in the filter house. It can be changed later if need be. Thanks again mate, take care, Terry.
Great job Terry can I just say you are an extremely talented man I love watching your videos I learn so much but I am very jealous of your skills would love to come up and see you set up one day especially as I'm only up the road from yourself
Hi mate, thank you. Plastic welding is quite easy really. If I can do it, anybody can, its just a bit of practice. You can come and see me anytime mate, no problem. I might be in a bit of a mess at the moment, as I'm going to start fitting the shower. Just let me know when to make sure I'm here. Take care, Terry.
Looks pretty Dame pro job there mate . Hopefully mountin tree 🌳 send you all the media you need Terry. I tried the siporax in a mini 3 tier bakki shower for QT tank and I had to lower the flow so much as it couldn't flow through it quick enough. Disconnected it in the end 🙈.
Hi Mark, and thanks mate. That'll be the problem, waiting for the media to come from China. I'll keep that in mind about the Siporax mate, thanks. Take care, Terry.
Hi Terry, Fantastic project👍 Can you please tell me where you get your welding rods? My heat gun has arrived and just need to order some pp sheeting to have a practice. Thanks Simon
Hi mate, and thank you. I'm gagging to get it in and running now, hope it works 🤞🤞🤞😂😂 Chunky looks really good mate, back to normal. Just hoping he stays that way 🤞🤞 thanks again mate, take care, Terry.
They mite have pulled there finger out i had near given up i had lots of Emails have you had it yet have you had it yet over months i will keep me fingers crossed for you Terry
The bakki shower looks spot on. Just wondered with the plastic welder, do you have to tack with one nozzle, let it cool and then switch to the welding nozzle? Ta 👍
Hi Marcia, and thanks mate. I don't bother waiting for it to cool, I just change the nozzle using a pair of pliers, and put the next nozzle in with the pliers, and off I go again. Thanks again mate, take care, Terry.
Hi Les, I forgot to show that bit mate. I have put slots all the way along on the underside hoping it will draw water from the full length of the shower. Thanks mate and take care, Terry.
Hi Terry, I have just taken delivery of a welding gun as I want to have a practice at building my own bakki shower. Is there a reason why you used 9mm pp ? Could I get away with 6mm or would it not be strong enough? Also what size welding rods do you use? Thanks Si
Hi Si, I don't really know mate, as I've not built one out of 6mm PP, but I would think it would be a bit bendy once you have all the media in and stacked up. I use either 4mm or 5mm triangular welding rods. For the 9mm PP, I would go with the 5mm rods mate, you can get them on eBay, Terry.
@@Wrighty thanks Terry! That is what I thought as it would probably buckle under the weight. 9mm pp and 5mm triangular rods it is then! Much appreciated 👍
Hi Si, it is cheap mate. As I've got all my filter house in grey, I couldn't use it, as it only comes in black. Thanks for the heads up on it mate 👍👍, Terry.
Hi Glyn, I use to use Pinnacle Studio, but I use Adobe Prem Pro now, which can be expensive mate. The Pinnacle Studio is around the £80.00 mark I think. There are cheaper about mate. Hope this helps, Terry.
Keep finding these videos Haha I cant believe you made this what a brilliant job just looks like something you buy out a shop!! Excellent
Hi Ryan, and thank you, really appreciated mate, take care, Terry.
hello I'm from Indonesia🇮🇩, very lucky to meet you, even though we are from different countries🌏. your video work is very beautiful, I always see it from every message that comes in, I really appreciate your work, hopefully we can meet again in the latest video, .❤
Good to hear you enjoy the videos, and thank you for your kind comments. Very much appreciated, Terry.
All good thanks for sharing hope you are well👌👍
Hi Matt, I'm very well thank you. Just want to get it up and running now. Thanks mate and take care, Terry.
Lovely job Terry, shower looks awesome. It’s so rewarding when assembling something by yourself. Keep up the great work and thanks for sharing 👍🐟
Hi George, thanks mate. Must admit I do love messing around and building things. I just hope it works 😂😂 thanks again, take care, Terry.
The shower looks amazing and will blend in nicely with your drum filter and moving bed chambers. Can't wait to see it plumbed in and running. Cheers.
Thank you, much appreciated. I've just got my fingers crossed it works now 😂😂 Thanks mate and take care, Terry.
Top quality product as always👍😊. Looking forward to seeing it being fired up👍😊
Hi Phil, thank you mate. I'm just hoping it all works 🤣🤣 Can't wait to get it up and running. A lot depends on how long it takes the media to come. Thanks and take care mate, Terry.
Hello Terry what a brilliant job mate can't wait to get a copy of your plans.👍👍👍
Hi Ricardo, and thank you. I will give it a good run to make sure all's ok first. Thanks again mate, take care, Terry.
Another successful build makes you wonder how they justify the shop brought prices with a bit of time and effort you've saved hundreds looking forward to seeing it up and running and will you be releasing plans
Hi Dave, and thanks mate. I must admit, I'm looking forward to getting it up and running. Once tried and tested, I will do plans for it. Thanks again mate, take care, Terry.
Oh I do love to watch you work. You never cease to amaze me with the things that you build well done mate hats off to you terry 👌👍
Hi Leon, thanks mate, really appreciated. It does look ok, I just hope it works 🤣🤣🤣 Must admit, I am pleased with it. Just gotta get it installed now. Thanks again mate and take care, Terry.
Yet another great build Terry. 👏 Just goes to show with a bit of patience and knowhow you can save thousands.💰 You could end up with something just as good if not better than shop bought and have pride in your achievements. Well done 👏
Hi Bob, thank you, much appreciated. I do love messing around making things. I am quite pleased how it turned out. Thanks again, Terry.
A GREAT JOB FROM A TIME SERVED WELDER !!!
Hi Allan, thank you for your confidence mate. Must say I have my fingers crossed lol. Can't wait to get it in and running now. Thanks again, take care, Terry.
Great work Terry, it looks fantastic and you sir are a talented man 👍
Thank you Paul, it's really appreciated mate, take care, Terry.
Yeah the welding was good but clearly the spray bar made the project look professional. Ha ha. All looking great Terry, quality job. Stay safe mate
Hi mate, The spray bar is the star attraction of the build lol. Hope you put your name on a boat, I could do with a holiday lol. Thanks mate, take care you two, Terry.
You've done it again Terry the shower looks totally awesome and just so professionally made. We'll done to mountaintree for sponsoring you with the media. Stay well.💯🙂
Thank Dave, it's always appreciated mate. I am pleased how it's turned out, just hope it works 😂😂😂 It is good of Mountaintree, but it depends how long it takes to come. I might have to use something else for now. Thanks again mate, Take care, Terry.
Thoroughly enjoyed watching as always. Welcome to the Mountain Tree club 😁
Looking forward to the install.
Hi Lau, and thank you, it's always appreciated. It's free, so I thought I'd give it a go. Trouble is, it depends on how long the media takes to arrive from China, I might have to use something else for now 🤔🤔🤫 Thanks again, and take care, Terry.
It is a functional piece, Terry. Do you assemble it from your own ideas? I found it helpful. Thanks for sharing👍
Hi Mate, I just copied the ones that are manufactured. Thank you for your kind comments, Terry.
Great job Terry . Even the "bodged" lid looks like a decorative feature . You could make a little plaque for it on the CNC . Would look even better 👍
Hi Mate, thank you, much appreciated. I might have a go at doing a small badge for it 😃😃 thanks mate, take care, Terry.
Bit of a Bon Jovi guitar rock vibe this week at the start Terry. You have made a beautiful job of that Mate, very very impressive . I wouldn’t be too worried about the lid at the back, good use of available resources. Hope the install goes ok once the media arrives. Lovely addition to your filtration 👍
Hi Paul, thank you. You can't beat a bit of Rock lol. It's funny, but the back of the lid being in 3 pieces is bothering me lol. I'll try not to think about it lol. Waiting for the media to arrive, will hold things up a bit, so I might fit it anyway. Thanks mate, really appreciated, Terry.
Hi Terry Thanks For The update fantastic job m8 nice watching your projects
Glad you enjoy the videos mate, much appreciated. I am pleased how it's turned out. Fingers crossed now that it works lol. Thanks and take care mate, Terry.
Absolutely awesome job Terry bruva the shower is looking ace's can't wait to see it running 🧁💯👌👌👌
Thanks Vince, much appreciated mate. I just hope it works 😂😂😂 🤞🤞I'm going to try to get it fitted in the next week or so 🤞🤞 Thank again mate, Take care, Terry.
Great job terry on bakki shower look forward to seeing you setting it up good luck mate 👍
Hi Dave, and thank you. Waiting for the media to come from China will hold things up a bit, but I think the wife will find me plenty to do lol. Take care, Terry.
Loved the video yet again mate, looks like you did a really nice job. So pleased you got the sponsorship for the media, every little helps 😁 Really looking forward to seeing you plumb it all in and firing it up. Take care and thanks for sharing.
Thanks mate, waiting for the media to come will hold things up a bit, but not to worry. If the weather comes better, I might take the bakki river out and start getting the filter house ready. Thanks again mate, take care, Terry
Great job Terry, looking forward to seeing it working and what difference it makes.
Stay well.
Hi David, thank you. I am pleased with how it's turned out. Just hope it works lol. Take care mate, Terry
Absolutely brilliant work Terry! 👏👏
Thanks Dave, much appreciated mate, Take care, Terry.
Professional job Terry.👌
Thanks Phil, always appreciated mate. take care, Terry.
Nice one Terry, looks great 👌, and free media, great result 👍.
Thanks Marek, Just hope it all works now 😂😂😂 Just depends how long it takes for the media to arrive now. Take care mate, Terry.
@@Wrighty that will work Terry, got every confidence in your workmanship 👍
Thanks for your confidence in me mate, can't wait to get it up and running now, take care, Terry.
looks Absolutely fantastic that Terry👍 can't wait to see it in action. What I wouldn't give to have your skills😂
Thanks mate. Plastic welding is just a bit of practice, I taught myself, and if I can, anybody can. Thanks again mate, take care, Terry.
Well I never knew that you could reuse those fittings.
Yes, you can mate. You can also do the same with the black solvent weld waste fittings if you're careful. Terry.
Cracking job mate, that'll look good on my fry setup, just saying 😁.
Fed up with this rotten weather 😒
Hi Andy, and thank you mate. I am pleased with how it's turned out. Keeping my fingers crossed it works 🤞🤞😂 Had a good day here today, had a bit of sunshine. Tomorrow will be a better day mate, take care, Terry.
@Wrighty we had hail recently 😒 making the fry build harder. Stay safe mate 👍🏻
Looks fantastic Terry, I wouldn’t mind a lid like that myself… 😉
Hi Phil, and thanks mate. The lid is bugging me a bit having the back made from 3 bits. Bet I end up ordering another sheet of PP lol. Take care mate, Terry.
Brilliant job Terry my only criticism would be the size of the outlet to get enough flow through the shower i have a 4inch pipe out the bottom of mine to get a good flow but cracking job on the build
Hi Lionel, and thank you mate. I've gone with the 2" because I'm hoping to connect to the existing pipework in the filter house. It can be changed later if need be. Thanks again mate, take care, Terry.
Soooo skilled
Thank you, very much appreciated, Terry.
Great job Terry can I just say you are an extremely talented man I love watching your videos I learn so much but I am very jealous of your skills would love to come up and see you set up one day especially as I'm only up the road from yourself
Hi mate, thank you. Plastic welding is quite easy really. If I can do it, anybody can, its just a bit of practice. You can come and see me anytime mate, no problem. I might be in a bit of a mess at the moment, as I'm going to start fitting the shower. Just let me know when to make sure I'm here. Take care, Terry.
@@Wrighty cheers Terry would love to but it won't be before I finish my build first
Looks pretty Dame pro job there mate . Hopefully mountin tree 🌳 send you all the media you need Terry. I tried the siporax in a mini 3 tier bakki shower for QT tank and I had to lower the flow so much as it couldn't flow through it quick enough. Disconnected it in the end 🙈.
Hi Mark, and thanks mate. That'll be the problem, waiting for the media to come from China. I'll keep that in mind about the Siporax mate, thanks. Take care, Terry.
Hi Terry, Fantastic project👍 Can you please tell me where you get your welding rods? My heat gun has arrived and just need to order some pp sheeting to have a practice. Thanks Simon
Can't wait to see it operational Terry, looks great. How is Chunky getting on, better I hope ? Thanks for the upload mate, stay safe & take care.
Hi mate, and thank you. I'm gagging to get it in and running now, hope it works 🤞🤞🤞😂😂 Chunky looks really good mate, back to normal. Just hoping he stays that way 🤞🤞 thanks again mate, take care, Terry.
Looking good mate
Thanks Thomas, always appreciated mate. Take care, Terry.
I have an idea if you could make the top lid open on a hinge instead of tacking it.
Hi Dan, that's a good idea and can be done, but where I have mine (under a shelf) I need to lift it off. Thanks for the thought though 👍👍. Terry.
Cracking job as always Terry i look forward to your look over the media and what you think of it
Thanks Martyn, always appreciated mate. Getting the media might hold me up a bit, but I've got plenty of other job waiting lol. Take care, Terry.
Terry from when they first contacted me it took about 6 months for a box to turn up 🙄🙄
Oh wow! can't wait that long. I do have some other media I can use. Thanks for the tip mate, it'll save me waiting for it. Terry.
They mite have pulled there finger out i had near given up i had lots of Emails have you had it yet have you had it yet over months i will keep me fingers crossed for you Terry
Thanks Martyn, I'm not going to wait for it, I have some other media that I can put in for now. Thanks again mate, Terry.
👍
Woot woot. First post
👌💞👌💞👌💞👌💞👌💞👌💞
The bakki shower looks spot on. Just wondered with the plastic welder, do you have to tack with one nozzle, let it cool and then switch to the welding nozzle? Ta 👍
Hi Marcia, and thanks mate. I don't bother waiting for it to cool, I just change the nozzle using a pair of pliers, and put the next nozzle in with the pliers, and off I go again. Thanks again mate, take care, Terry.
@@Wrighty ah didn't think of that, will have to remember that thanks 👍
Hi Terry, looking at the plastic pipe at the bottom, how does the water get out?…..could see any holes etc.
Hi Les, I forgot to show that bit mate. I have put slots all the way along on the underside hoping it will draw water from the full length of the shower. Thanks mate and take care, Terry.
Hi Terry, where do you buy all the tools for the plastic welding? What do I have to use on Google search? I'vé not had much luck unfrotunately...
Hi Steve, have a look at my plastic welding video: czcams.com/video/xKk4iDlTiaU/video.html it should help mate. Any questions give me a shout. Terry
Hi Terry, I have just taken delivery of a welding gun as I want to have a practice at building my own bakki shower. Is there a reason why you used 9mm pp ? Could I get away with 6mm or would it not be strong enough? Also what size welding rods do you use? Thanks Si
Hi Si, I don't really know mate, as I've not built one out of 6mm PP, but I would think it would be a bit bendy once you have all the media in and stacked up. I use either 4mm or 5mm triangular welding rods. For the 9mm PP, I would go with the 5mm rods mate, you can get them on eBay, Terry.
@@Wrighty thanks Terry! That is what I thought as it would probably buckle under the weight. 9mm pp and 5mm triangular rods it is then! Much appreciated 👍
You welcome mate, Terry.
@@Wrighty just ordered my 9mm pp from Vision Plastics in Manchester. 2440mm x 1220mm £156..very cheap 🤞🏼
Hi Si, it is cheap mate. As I've got all my filter house in grey, I couldn't use it, as it only comes in black. Thanks for the heads up on it mate 👍👍, Terry.
hello terry were can you get that plastic from mate
Hi Ian, I use Trent Plastics Ltd. www.trentplastics.co.uk/ Hope this helps mate, Terry.
Terry what software do you use to join your you tube videos please Regards Glyn
Hi Glyn, I use to use Pinnacle Studio, but I use Adobe Prem Pro now, which can be expensive mate. The Pinnacle Studio is around the £80.00 mark I think. There are cheaper about mate. Hope this helps, Terry.
What are the materials you use???
Hi Rio, I used 9mm polypropylene sheet. The eggcrate was 12mm and 2" pipework. Hope this helps.
Will there be plans for your bakki shower
Hi mate, I am in the process of doing plans for the shower, but I've been a bit busy. I will try to get back into them 👍👍 Terry.