PDR Glue Pull Gone Bad
Vložit
- čas přidán 16. 06. 2015
- www.denttrainer.com This video is about a paintless dent repair glue pull repair that went totally wrong. You'll get a good reason why you shouldn't pull on a curved rail with a mini lifter but more importantly how to to still fix the dents and get paid. You'll be able to watch the full tutorial here
www.denttrainer.com/courses/d... - Jak na to + styl
So did you charge customer for fixing your error?
Why don't people pay attention? I fixed the dent completely and showed the rest on denttrainer.com And yes, I charged them because the repair was successful and this video was meant to teach others not to make the same mistake or you'll have a bigger challenge.
I think he meant, did you charge them extra, cause the error was in addition to the original problem which racked up the time frame and so on, so it would cost more over all.
I'm sure you charged them just for the original problem :)
Of course not. Watch how this dent came out clean here for free
www.denttrainer.com/courses/deep-glue-pull-don-t-do-this
Really .? Wow
I'd say no dude. Why would u even think like that.. ????
Thank you for showing your mistake to others so others will avoid the same mistake
Fair play- the majority of us would have deleted the video and pretended it never happened. Thanks for putting this on here so we can all learn from it.
Thanks for posting this. People tend to forget that in any job, it’s the mistakes that you learn from the most.
I’ve been researching PDR for a bit now in the hopes of fixing a couple dents in a used truck I just purchased. All the videos I’ve watched so far show what to do. This video opened my eyes a little to make sure I have the tool in the proper position before attempting the repair.
Just have a pdr guy fix it lol. You will just mess it up.
I have watched this a few times, I have a hard time owning up to my mistakes I do it, but it's hard, u teach more than PDR, u show "quality character", KEEP IT UP,
great video,
i like to watch people learning from their mistakes , , , that makes you a successful person in what you do .
zuss physique agree
zuss physique
knjbhbhgu
What?
Manny old PEOPLE have a lot of mistakes on their lives..
And no one learning about it.
You are a just like everyone human.
Big MOUTH.
Have u a solution u would like to demonstrate ???? I'm all ears as well
I like the fact that your ego is not too big to admit a mistake. Great lesson for all of us!
The wrong way is just as important as the right way when learning, thanks for the videos and including the mistakes.
Hey Mike, question about removing a dent on a 04 sierra ext cab on the rear door. The dent isn't that bad (couldn't see it when I bought the truck) but it is there. It's almost like someone closed the door too hard and creased the center when closing it. Can this be fixed with hot water or easily with the glue pull or am I likely to cause more damage (paint, new dents) by not bringing it to a professional?
I have the same looking dent on my car. How would u recommend removing it properly? (seeing as this made it worse).
This is the kind of video that needs to be on youtube more often-- the real life stuff which is how everyone learned pretty much... everything.
I roasted somebody below for you (I'm sure by now they've given me a real good comeback because these days, nobody can be wrong). I can't believe some of the comments. Pure idiocy. It makes me weep for the future.
Thanks for posting.
VERY GOOD VIDEO I ASK PERMISSION TO POST ON HIS PAGE
where can i purchase the pink glue?
What type of spray do you use to remove stick pad?
Very informative PDR Pull tab video. Where do you buy your tools? Have you had a dent you couldn't fix?
I was kind of irritated that the repair wasn't shown. THE GOOD NEWS IS... You did show the results of your error in judgement. This I learned from. Thanks.
I’ve done that on a big dent with a few sharp creases in an Accord sail panel. It actually worked out because it helped spread the metal out lol
what kind of glue do u use?
Hola amigo muy bueno tu vídeos yo pintor de automóvil muy bueno tú trabajo
What glue sticks do you use please
May I ask you . What about if the paint was scratched and there is a small dent also . Do you recommend me to fix the dent first or the paint? I don't know actually. Can I send you the picture of the dent ?
Never showed the result..
What glue is that?
Man I'm trying to do a pull to paint from large hail on a rail and it sucks . I can fix just about anything . Has anyone figured out how too take out deep sharp stuff... I'm on a Ford excursion the front rail cap is skinny and crushed ... My body shop is stumped and so am I.. any advice Mike.
I have a few of them tabs but didn't understand how they work
Great display of placement of the tab. Thank u.. mike
Great video, thanx for sharing!!!
By the way, what is the liquid used to remove the glue?
Paint stripper
Wats the srripey thing called that enhances were dents are
Great video, thank you for having the self confidence to post your mistake to help us all not make the same. Appreciate it.
Thanks for the education. How do you get those graphic "stress lines" to show up please? They seem to be a great aid.
It's OK. I saw on another youtube that they shine on the dent area with light panel that has parallel dark lines on it.
When the teacher makes mistakes in front of the students, it just shows that no matter how much experience u have those bad decisions come along , good lesson for the students.
Mr. Mike Toledo first I want to thank you for your videos secondly was nice meeting you at the Orlando Convention Center PDR and great video you have your with the tutorial on glue pulling
What German brand do you use?
Thank you for this tutorial!
Thank you for sharing
do you guys sell glue, lifters, sliding hammers, etc? where is a good place to buy? are they expensive?
Ebay
and amazon
Is Isopropyl Alcohol 100% good to remove the glue from the car?
TRusty394
91% is the one that you need.
Thank you for making this video i have a dent in a similar spot im about to work on and would have made the same mistake
Appreciate your honesty. This is amazing information thanks
is there a specific type of hot glue you use?
Jonathan
@@TheMf51y where can I get this Jonathan brand glue?
:37 , 1:10 and 2:00.....So on and so forth...lol....Perfection comes with practice ... The best teacher's are the one's that learn from their mistakes and are humble... Sounds like you, from this vid... Any student who is taught by you is lucky.. Much success in the future my man.
Mark Griego thank you. Finally someone understood this video :)
Honesty is the best policy
Thank u Mike .....for your demonstration . Of . ying n yang. I learned a lot .. and will utilize it for sure ..⚡
2:08 "ohh my godd!!" priceless.
Exact dent that i hv in same place n car.
everyday is a school day and its good to know ways around the problems. its extra content
“Dent trainer” More like “Dent maker”
Don’t be so quick to judge watch the video for free and then tell me if your comment still makes sense 😉
www.denttrainer.com/courses/deep-glue-pull-don-t-do-this
I’ve done the same thing. I think at some point we all have.
Sir what price of this equipment
Dent Mini Lifter can be expensive. The highest I've seen is $150+. That's from quality brand product though. There's one from Keko going for $110 at amazon.. Some are much cheaper with poor quality for $35 or less.
Hi, are these types of glue any different from the commercialy available at any supermarket?
Yes, many of these glues are made for the PDR industry. They are made just for glue pulling dents on cars. There are different strengths and ones for different outside temps.
Thanks for showing the mistake. It's educational.
that looked like a good candidate for the hot box
Now will have to have a professional push it out from beneath.
what chemical spay to release the glue
91% alcohol
Wow... that's exactly why I don't try this stuff myself... what a mess...
Applying a little heat with a heating gun would help shrink the metal
He stopped the video right before he did the real damage..
what did you spray on there to peel that glue and stuff off so easily
rubbing alcohol
+datstocklyfe aceton he use
time to invent a puller with curved feet
I think you should of at least run the feet along the hood/trunk seam instead. There is way more surface area for the feet to disperse the counter force.
Parece un techo de corsa jaja
Part 2?
ZANGETSUxPR definitely. On dent trainer.
What kind of magic glue is this, is full adhered in seconds and comes off instantly with some spray? Crazy
Its hot glue dawg
Pink glue sticks? Why did you call them "the good stuff" or something like that? I thought the "good stuff" was the yellow glue sticks? BTW great video...
roasted that import son
ОЧЕНЬ ХОРОШЕЕ ВИДЕО ПРОШУ РАЗРЕШЕНИЯ НА РАЗМЕЩЕНИЕ НА СВОЕЙ СТРАНИЧКЕ
Александр Капусткин
i have done the same thing thanks for showing this to remind me not to do that agine..lol
if i was the customer id be pissed
square glue puller for a circle dent...hmmm
Good FYI!
Take it to a real panelbeater an get it fixed properly!
There’s some duct tape that color somewhere
Is written on my You Tube channel'm learning golden hammer with videos'm from Brazil
wtf a trainer make from one dent three dents
+Ray Titselaar Thanks for pointing that out. I guess the title "PDR Glue Pull Gone Bad" didn't ring a bell?
Ray Titselaar Trainers can fcuk up too. The difference is they can remedy the fcuk up.
Find out how good it really did come out on denttrainer.com
The best teachers teach you how to avoid mistakes in the classroom. Otherwise how is that teaching. LOL
DSM Dallas actually the best teachers aren’t embarrassed to show mistakes to help others learn not to do it. And then to be able to fix it like I mentioned in this video and did on denttrainer.
I can't stand lifters but some people swear by em. #SLIDEHAMMERS
Hey man use the smaller tabs, not that big lol
How do u get the glue off without messing up the paint
nothing WD40 can't fix, lol
Slamdoxicalz lol you lol'd your own comment lol that's pretty lol
I drink WD40 instead of energy drinks. It gives me wing....cancer, but who cares
Rails are veryyy sensitive.
Can I do this myself? How much would it cost? I know who did it thinking they were slick, so I pour Coca Cola down their gas tank.
هههههههههه جهاز مخيس جاء بيكحلها اعماها
used wrong tool in the first place!
Rookie...
If you have a 250,000 dollar car I could understand being anal about a dent of that size .. but 95% of use drive 10,000 dollar and lower
I thought you were going to show us how you got out of this mess. At the end of the video, it's still worse than at the beginning.
BrightBlueJim that’s the point. Why would I want to show you how I got it out? This is a subscription site. It takes many hours to film and edit. I can’t show everything for free. Join Dent Trainer and you’ll see how it was done and what you can do from making the same mistakes.
Okay, so your idea of how to sell your expertise is to just show the part where you do it wrong. Good luck with that.
BrightBlueJim Yep you’re right. I’ll never be successful teaching this online.
Omg are you serious man .... easy dent man if your not ready for rails leave it to a pro !
your tap downs didn't do a damn thing...and you're training people?
Fucknuts good point lol thought I was seeing things
He was actually driving more small dents into it, if you look closely.
Using a slide drops the edges as well @ the 4 corners these guys aren't fixing them perhaps small stuff lol deep n sharp all u hear are crickets cherpping... aluminum rails aernt a joke
So the slider hammer has lesser pulling power than the mini dent lifter? Cheez didn't know that
IamAnoobiecheez No. The sliding hammer would not have been resting on the radius of the panel and caused the two dents.
Oh ffs 😂😂😂
I didn't show the final end result for a reason. Go to denttrainer.com if you're going to be serious about learning pdr. My time and techniques won't always be given away for free on CZcams. Thanks for watching though.
Great video, thanx for sharing!!!
May I ask what is the liquid you use to remove the glue?
So you baited folks into watching this shit ? Great job ..... Guarantee I won't buy your snake oil videos ....
Parking lot bully Tell that to the thousand members on Dent Trainer.
Random randomness Lmao
Günstige Werkzeuge www.cars-body.com/collections/frontpage/products/pont-de-debosselage
do you have any more that aren't worth watching?
I think you will give people schizophrenia by having that faint background talking. It's seriously driving me crazy.
Da 1 sono 3
really? why bother, just put up a single pic saying I FIXED THIS.
Lmfao
Why are there so many dislikes?
Tommy Gun because most didn’t pay attention about the real lesson and it was actually fixed but not shown. People here get upset if they don’t always get completely free tutorial.
Tommy Gun Because it was like watching a film only for the end to be clipped off.
Perfect. I did my job right then.
Why would you start your video by saying "whats up" why do poeople say that ?
What's up with that?
clickbait ...
Mdr tu la niqué plus que ce que tu la redressée