Absolutely this. Tesla glass is already hard to align properly after removal, you definitely don't want to make that even harder or impossible by getting the wrong cut line! They need to be as symmetrical as possible.
At first this looked like a janky build but I've been following along and I was way too quick to judge. Looking mean man, you're doing a great job! Can't wait to see the finished product.
A huge congratulations for getting this far in the build its looking amazing. I love the fog lights really cool. I can't wait for you to enjoy this beast.
I found out the tip about getting the high position windows when I did my video about replacing the puddle lamps. Glad you found it! Looking SOOO sick!
I had all most thought you had given up on this ! But Ma man came back SUPER STRONG looks amazing!!! This car should be satin black and some extra shinny black on the trim and super white seats
The rear glass looks great, but you should add some sort of drain port so water doesn't pool. Also, can you just modify to turn the bulbs/projector 90 degrees inside the fog light housing?
Just incredible… Regarding the door glass-have you checked with a hot glass studio to see if the can make it? They would create a mold and form it to the curvature you need. Just not sure how perfect they can get it.
Use the busted one for them to practice on I know there’s not much left of it but still, at least you’ll know if it doesn’t break it anymore than you’re probably good to go
I know you just primed but you need to add some seams to the rear. Those sharp coroners and flat decks covered in bondo will flex. The bondo will eventually crack and ruin the paint.
that is not your only option... you make the glass template out of the same thinkness aluiminum... then you can bend it to the proper shape as well as cut the correct shape.... then you can send you aluminum template in to have a mold made and then they make the glass... this process has been done for years....
What about taking a diamond glass blade and put it on the angle grinder and cut the glass with that had a little bit extra so you can use sandpaper and smooth the edge
The windows are laminated glass so if yu go to a class company and talk to them they have the right cutters that will cut it down and heat the lami between the glass and then cut it that should work
Looking great. Might be worth making a fiberboard template for window glass to check fit while you figure out how to get cut/shaped.
Absolutely this. Tesla glass is already hard to align properly after removal, you definitely don't want to make that even harder or impossible by getting the wrong cut line! They need to be as symmetrical as possible.
Парни, вы лучшие! Безумно красивый проект, судя по всему еще и сделанный с умом
At first this looked like a janky build but I've been following along and I was way too quick to judge. Looking mean man, you're doing a great job! Can't wait to see the finished product.
A huge congratulations for getting this far in the build its looking amazing. I love the fog lights really cool. I can't wait for you to enjoy this beast.
Man I loveeee this build! One of the best of CZcams, wish you had sponsors for weekly uploads and to get this out to everyone! Sema winner!!
Single handedly changing the automotive world
Idk who u are but your my biggest supporter 🫡😄
@@cyber_hooligan And you are the hardest working CZcamsr in the business.
Amazing, the patience that you have is out of this word!
I found out the tip about getting the high position windows when I did my video about replacing the puddle lamps. Glad you found it!
Looking SOOO sick!
Wow well done . So happy to see this project nearly finished and can see pride in your face. great job pal!.. 🙂
Can't wait to see what it looks like with all it's glass in place!!
Those little lights are in the perfect position! Nice job
I have no idea how many times you have removed each panel to put it back on. That alone is impressive. Keep up the excellent work. 👏 😮
Great work!! Thank you for the update. Can't wait to see the end results!
This is looking so slick. Keep up the awesome work dude!
That design looks crazy.......Whoa!
This car is looking great. I am looking forward to the finished product.
Keep doing your thing bro. It looks sick!!
Love what you are doing.
Super cool original and hard work. chop top model 3 and metal aero design is quite rad.
I had all most thought you had given up on this ! But Ma man came back SUPER STRONG looks amazing!!! This car should be satin black and some extra shinny black on the trim and super white seats
Keep at it! Its so cool.
I love this build ☝️✌️
Looks awesome!!!
Looking good now, actually looks good in matt pink primer ha
Keep up the great work
wow nice design and project bro... looks like games car
man, that looks sick!
Crushing it!
Can't wait for the final results
looking good
sick design
So awesome
Well Done!
Eddie at Kotto Auto Glass cut down a huge Impala windshield to fit a little 1973 Saab 96 for the TV show Wheeler Dealers.
yo that's looking dope
Nice job
That’s sick! You need to mass produce that kit.
Everything except the center of the front bumper cutout in the middle of the bottom of the bumper looks good.
Wonder if you can present it to elon when your finished
The rear glass looks great, but you should add some sort of drain port so water doesn't pool.
Also, can you just modify to turn the bulbs/projector 90 degrees inside the fog light housing?
The side windows will fit if you limit the travel to to the top, then you will not need to cut it.
cant wait to see it driving around, :O
Just incredible…
Regarding the door glass-have you checked with a hot glass studio to see if the can make it? They would create a mold and form it to the curvature you need. Just not sure how perfect they can get it.
On the rear glass, are you adding protective weather stripping? Just thinking how it would be affected by rain.
You deserve to be recognized by Tesla bro
IMO, in the near future people will design their own cars and spec them and have them built and delivered
Little question, are you gonna do a resume of the build? I would like to see how it’s started and how it ends :)
Nice
Not a Tesla dude at all. But holy fuck. This is incredible.
Use the busted one for them to practice on I know there’s not much left of it but still, at least you’ll know if it doesn’t break it anymore than you’re probably good to go
I know you just primed but you need to add some seams to the rear. Those sharp coroners and flat decks covered in bondo will flex. The bondo will eventually crack and ruin the paint.
The foglights look amazing! No way that would get approved herein europe!
Was about to comment the same. Do they not have to comply to any regs out there?
that is not your only option... you make the glass template out of the same thinkness aluiminum... then you can bend it to the proper shape as well as cut the correct shape.... then you can send you aluminum template in to have a mold made and then they make the glass... this process has been done for years....
Can you not crack those fogs open and rotate the light assembly 90 degrees?
Have you tried a oem factory that can manufacture the glass to spec i know some factories in india that can do that you can look something up
🔥🔥🔥
🔥🔥🔥🔥
What about taking a diamond glass blade and put it on the angle grinder and cut the glass with that had a little bit extra so you can use sandpaper and smooth the edge
🔥🔥
The windows are laminated glass so if yu go to a class company and talk to them they have the right cutters that will cut it down and heat the lami between the glass and then cut it that should work
👍🏻
I hope you succeed in cutting the glass with water jet
Glass cutters professional glass cutters
Damn that’s almost $1000
U have to pt alcohol on where u want to cut it. Then lignht it up and then cut it
I've cut glass for years with a wet tile saw.... consider that
definitely the water jet would be better
You could have used CAD, Cardboard Aided Drafting.
do half glass in the back like a v8
Might want to check Your States DOT regs concerning those lights just to be on the safe side.
Elon gonna hit you with copyright and take the cat when you’re done, watch
Or hire him
CarTube is getting caught slippin on this. Not got the views or recognition it deserves
rigghhttt? i don't understand howww, someone needs to plug this on their channel so it get's some attentionnn
Cut the glass under water so it wont shatter.
Urine would be better for the procedure overall.
I don't think you can have lights facing outward!
Why not just taking the base glass and put it on the new one and sign on the old one.
Calibrate the window so it rolls up only half way? Naaah, let's just cut the glass.
Ever heard of 3D printing?
Figure it out man what is wrong with you
афигеть я в шоке от проекта ! привет из далекого Казахстана