GMC Yukon Denali Rear Disc Brake Pad Replacement
Vložit
- čas přidán 19. 06. 2013
- Watch the proper procedure for replacing rear disc brake pads.
Featured vehicle: 2007 GMC Yukon Denali
Company: AMS Automotive
Website: www.amsautomotive.com
Phone: 800-528-6743 - Auta a dopravní prostředky
You SERIOUSLY need to remake this video from the opposite side. You know, where you're doing all the work.. I can't see what you're doing.
No shit
Thanks for the great video!
Great video and talking points.
Need some Chrisfix angles
What size wrench/socket for the caliper bolts & caliper mount bracket? What's the torque spec for the caliper mount bracket to knuckle? - thanks
what size torque wrench remove, caliper/replace break pads (2005, Yukon..
+Lionnie Hines Hines T55 Torx
So I have a good question that might have been done off camera I have an 2002 Yukon Denali I am planning on replacing my brakes so my question is with doing the decompression of the calipers do I need to still bleed my brakes as well once everything is completed?
No, not unless there's a good reason to bleed the brakes. Just make sure there's plenty of brake fluid in the master cylinder reservoir, sometimes it pushes the level up & can make a mess if they were worn out & fluid topped off.
If its an ABS system you want to open the bleed valve up so its doesn't reverse flow when compressing caliper
Dude you can’t see anything from this side view. Great job at explaining but we can’t see what your talking about!
I have a question for you. When changing the front brake pads Do you always have to change the rotor also with the brake pads? I have a 1998Yukon GMC the step you showed me on the video Do I follow the same steps when change my brakes?
+tmyeshia72 It is always a good idea to replace or turn the brake rotors when replacing brake pads. The steps on all brake pad replacements will be similar to the video.
hi my vehicle is a 2001 Yukon denali I called and ask for some brakes but they want me to take them in to see if the dual calipers or single would you know which one it with be for my suv thanks
Why not show the rotor replacement?
You just don't replace the brake hardware huh?
OMG can't see a damn thing!
Sure would have been useful to have mentioned the torque specs.
He did. 28 ft lbs on the caliper bolts and 40 ft lbs on the lug nuts.
@@timredland1759 140ft Lbs on lug nuts.
Can't see what you're doing from the angle of the camera.
Sa
why all the junk on the screen?
you using things or tools everybody do not have and explaining this
Uses magic to remove bolts... clearly doesn't explain it....
We don't need to look at you we need to look at the job we need to look at the caliper we need to look at the brake pads we need to look at the roederer we don't need to see you and your black shirt
You should of did it with no video because I can’t see a thing anyways. Horrible. Great sound effects though 😂
Huge lack of info on this video. Thumbs down.