How To Get Android Auto & Apple CarPlay In Your ND MX-5 Miata
Vložit
- čas přidán 7. 09. 2024
- Here's a full guide on how to update your Miata firmware and install the new USB hub so you can get Android Auto & Apple CarPlay in your 2016+ ND Miata. This is for the North American model - USA, Canada, Mexico, Puerto Rico, also known as 'NA N' on your Touch-screen. Be sure to download and read the instructions in the links below.
If your firmware is 29.00.000 or older you must at least update to “31.00.100A” before updating to any newer firmware! Follow the process shown in this video but use the 31.00.100A firmware files instead of the 70.00.100A files.
Firmware 31.00.100A: drive.google.c...
Links to what you need:
USB Retro Fit Kit (Yes this is the correct one):
amzn.to/44pLyWu
EDIT: NEW FIRMWARE RELEASE! If you have the 70.00.100A firmware and have echo problems with phone calls a new firmware has been released for North America as a fix. If your version is 31.00.100A and above you can go straight to this new firmware (Skipping 70.00.100A). This is a single file unlike the two files shown in this video. The new firmware is "cmu150_NA_70.00.335C_update.up" Apply this new firmware just like the firmware installation process shown in this video at 5:43 (This skips the fail-safe step completely):
drive.google.c...
You can see my new 70.00.335C firmware update video here:
• How To Update Mazda Co...
(Old firmware, look above) North America NA_70.00.100A Firmware & Instructions (Put the two firmware files on a formatted USB drive):
drive.google.c...
**** Mazda asks you the disconnect the battery before the USB hub install procedure, I didn't. This is up to you. I also install the new USB cables differently than what the instructions say, you might find it easier to install them as intended in the instructions in the link below ****
USB Hub Install Instructions:
drive.google.c...
Updated Buy Recommended Anker USB-A to USB-C Cable Here:
amzn.to/3REBZht
Buy Recommended Anker USB-C to USB-C Cable Here:
amzn.to/3RBieao
Buy Recommended Anker USB-A to Apple Lightning Cable (Carplay):
amzn.to/3Yymav7
Buy Recommended Anker USB-C to Apple Lightning Cable (Carplay):
amzn.to/3DLmiiW
If you're not in North America
EU N is for all of Europe and UK.
4A N is for Australia, NZ, Southern Hemisphere, South Asia, Oceania.
EU N Requirements:
1. FIRMWARE Version for 'EU N' for CP/AA .up files.
cmu150_EU_70.00.100A_failsafe.up file MUST Install FIRST 6.8MB.
cmu150_EU_70.00.100A_reinstall.up file Install SECOND 2.3GB.
2. C830-V6-60Z New USB Data Cable set of MUST Install THIRD.
3. TK78-66-9U0C New AUX Unit, MUST be Installed LAST.
4A N Requirements:
1. FIRMWARE Version for '4A N' or (ADR) for CP/AA .up files.
cmu150_ADR_70.00.100A_failsafe.up file MUST Install FIRST 6.8MB
cmu150_ADR_70.00.100A_reinstall.up file Install SECOND 1.8GB.
2. C924-V6-605 New USB Data Cable set of MUST Install THIRD.
3. TK78-66-9U0C New AUX Unit, MUST be Installed LAST.
My camera setup:
Sony A7III: amzn.to/2XM1BwF
Rode VideoMic Go: amzn.to/2NVonNY
SanDisk 128GB: amzn.to/2F2Zq0o
This is still relevant 4 years later. Thanks for sharing all the goods! Appreciated.. and just watching it done helps!
Need to give you props. Following your instructions, I was able to install this in less than 2 hours. A+ would buy from again.
This is still relevant 3 years later. Followed this guide last night and replaced my screen while I was at it (it was delaminating). Thanks for the video!
Hey, I have a 2017 Miata. You said you replaced your infotainment screen. Do you know if it's possible to replace it with a 2019+ screen with the black bezel instead of silver? I want to do this on mine but not sure if there will be an issue.
@@DaveSimkus I'm wondering the exact same thing for my 2017 RF. Did you ever find out if the newer black bezel screen is compatible?
Thanks for taking the time to make this video. I was happy to find out through my research that the earlier Mazda 3 which didn't come with Apple Carplay would be upgraded to have it. That's huge. And I appreciate you showing all steps. Many DIY videos skip the crucial details, but you've shown them all.
JUST finished my install after following your video, everything went smooth. 2 things to note, you don't have to take apart the entire center console (command nob, arm rest, etc.) as the shifter boot comes off by itself with the little rubber part. 2nd is showing that the origional connectors for the CMU and bottom USB hub are not used and can just be tucked away in more detail would have been nice.
Great vid though!
This might be the video tutorial to make me jump the fence and do the installation myself on my MX-5 ND. Props man!
@@BK_BT I dont even own and ND yet but I am looking at buying an ND2 tomorrow. The fact they dont have android auto is absurd, so this makes me feel that much better about getting the car.
This tutorial was super! Thanks again, can't say enough good things about the process and the files you made available. I'll subscribe for more good stuff.
Thanks for posting this great video. Upgraded my 2016 today and it took me 3 hours to install the new hub and cables using your video as a guide (already updated the firmware). You saved me hours of effort I am sure. Thanks again.
Did my install yesterday along with the FlyinMiata rear view camera. Everything worked! Your video gave me the confidence that I needed. Thanks for doing this.
This is a great tutorial. If I ever need to do this, I'll get Mazda to do the install and spend a few extra dollars. Crazy how you need to disassemble the whole interior for such a small thing.
I’m kicking myself for not thinking about this before I did the rear camera install, I would have been 75% of the panels out already … nice video
Firmware update performed flawlessly. Thank you for the files and the clear instructions. Kit arrives Friday, can't wait to finish the job!
But why is necessary to change the hub?
@@ilTubodiEliGabri by hub do you mean the usb port? I believe its that the stock USB port does not support the Apple/Android connection.
@@minm0 yeah i mean that, anyway thanks, i even read that if you use the old one you can brick your console so yes, i need to change it
Fantastic walkthrough! Knocked it out in about an hour and half (did most of the disassembly with the help of this video while the firmware updated). Thanks for posting!
Thanks to you and a couple of other content providers for all the info. Combined the knowledge of all of your videos and got the AA module installed today in just about 2 hours. Only 1 small hickup, self induced. Now I have a nav display that I can trust and doesn't drive me insane to use.
This is the best Step-by-Step walkthrough video of how to retro-fit AA on a ND Miata, thank you so much for the video! This helped me a lot in retro-fitting AA on my ND2
Awesome video, I needed to remove some parts for other things and this video make me lose the fear to strip parts of my car and also showed me what I needed, THANKS!
Thank you, thank you, thank you! This video, google drive folders, and newest firmware update made my install a breeze. This has to be the most compressive video out there; well organized too!
Really appreciate this video, manufacturer of the USB ports sent me zero instructions but this made it easy
Definitely appreciate this video. Mostly for the disassembly of the dash. Luckily for my my 19 RF was already on the newest firmware, just needed the box installed. Happy person this fine Sunday morning!
I'm currently updating my Mazda 3 and have you keeping me company 😅 sweating balls man.
😂
@@BK_BT It went well by the way 👌
@@TheLondonCyclist nice!
Thank you so much! I completed this project on a 2019 mx5. It does take about 3 hours. My wife will never drive a manual. So, due to the auto it did add more time and complexity. If you have an auto, the forms do not recommend removing the shift knob. Put it in “N” and remove the negative battery cable and get ready to move the console a lot.
Thank you so much for this great step by step video! With your information the installation of the wireless Apple CarPlay was really easy! 👍🏼
Can you share the link for wireless CarPlay retrofit?
Thank you so much for posting this video, I just did mine and very easy because of you.
Joji at the end is the cherry on top. nice video man.
I don’t have even my ND yet but I was thinking of buying an Android Entertainment Screen and prepare this original one
I just finished with the install and it works perfect! (more important the other stuff still works too heated seats, power roof etc LOL)>. You're the man, I couldn't have done this without you. You've got a fan for life!!!
For the automatic transmission:
You can remove rubber piece without removing the whole armrest area! Even in P (though it would be slightly easier in N). To access and remove rubber mat you just need to pull that metallic circle around your shifter straight up. After pulling it up there is nothing that holds that rubber anymore and you can easily remove it.
Glad I decided to look through the comments before doing this lol You sir will save me a lot of time with this tip. Thank You!
Just got a slightly used 2018 mx5...
thanks for your clear directions! even though they just convinced me to spring for the dealer option (assuming it's about 300....) still, if that doesn't work, then I'll definitely be back....
In regards to the Mac OS.... Just format the usb as MS-DOS (FAT32). I just did that and it worked perfectly.
Thank you for this! I was able to install the hub in about an hour. Thankfully, the OS already was at version 74.
Just done upgrading, works perfect with iOS 14. Great vid, appreciate it!
thank you for this (about to go try the updates and install now), doing it on a CX-3 so the dash tear apart will be a little different but super helpful with the software walk through, I was reading the booklet then searched online for a video and glad yours came up.
Just used this video to help with my install. Although the firmware version is now higher than the one he uses, everything was very helpful. He made taking some of those panels off look easier than it was for me lol
Success! I formatted a lexar usb stick with an old chrome book and that did the trick. Thanks for the inspiration!
Thank you so much for doing this video. It was really helpful you did a video on your first install. Very informative when you would point out things as you came across them. This video made the install I did go smooth
Thanks for this How To ! It really helped me, because I bought a kit with documentation only in japanese, without wiring diagrams ! Besides, I really appreciated the explanations on how to remove the several parts.
i plan on modding my cmu and this doubled as a great tutorial of how to access the head unit!
I had to double check to makw sure i wasn't tripping sweing the sun in the beginning of the video
Thank you so much for doing this tutorial! Saved me a lot of heartache and MONEY!
You certainly earned my subscription buddy. Thanks again man!
This video helped me so much. Thank you
Thank you sincerely for this video, got it done today after work. Everything went well with great explanation. I was out there with my headlamp too lol
Many thanks for the fantastic video!
@888 Werkes Thanks for the video. I installed yesterday, and couldn't have done it without your excellent tutorial. Your video saved me about $400!!! Much appreciated.
Thanks for the video. Where did you find the gloss black surround for your infotainment screen??
Came with my car. I think it might be an ND2 thing?
Did you figure out a way to make yours black? I don't like the silver on mine either.
Great step by step guide, very Matt-esque ;)
Works Flawlessly. Thanks!!!
Thanks for the great video. I did it under and hour. Saved me hundreds $$$!
Very well DIY video. You are awesome!
How ridiculous you have to strip the whole interior for one hub..
exactly! FUCK Mazda!
@@BK_BTso, did you do it again for the wireless version?😂
Thank you for this. Helped me out a lot.
Thanks so much for slowly walking through this.
Good video. Great links. I used it all to do the upgrade to Android auto. Worked like a charm.
You my friend, are a legend. Thank you, from the UK
Great how-to, +1 for papa franku
Awesome video! I just followed your steps along with the PDF for install knocked this out in about an hour and a half!
CarPlay is so much easier to have hands-free infotainment
Zoom zoom
Thanks for the great walkthrough!
What are your thoughts on the USB Unit after using it for some time? Hoping to get mine soon!
Thanks for the awesome video. Finished my install today and it works great.
Thanks for the video, you saved me a lot of time and money with your explanations. Keep up the good work ! :)
Thank you for this video. I used it in my own install and it was very helpful.
Thanks!!! This guide just saved me $500. Honestly thank you!!!
Vielen Dank für das sehr gute Video. Einbau hat innerhalb 1,5 Stunden geklappt.👍🏻
I want to do this but can’t bring myself to trip apart the interior. Great video
@@BK_BT good to know thank you
I just bought a 2019 Miata a little less than a month ago and was sad it didn't have this installed. But its good to know it is a possible DIY project, great video and you're awesome for providing links. But hoooly FAK the piece on amazon costs $162? Not sure I care that much about android auto.. lol Can't imagine what a dealer would want to install this, probably even more outrageous.
I bought a 2019 Club yesterday. They quoted me $320 installed. Didnt learn about this it until after the purchase or else i would have negotiated it into the purchase.
Seeing you tear the car apart I’d rather let dealership install for the money. You tore a lot of panels apart. Did anything break. Seems like the Mazda panels are pretty rugged.
888 WERKES Good call. Actually the physical install doesn’t look complicated just a lot of steps.
Thanks a lot man! Saved me quite some stress & time🙋🏻♂️
Super helpful did the upgrade thanks for posting!!
While you're doing this, you should add Flying Miata's backup camera as well - a must for the RF.
still procrastinating. Can I update the firmaware without installing apple carplay? in other words just have it ready for the add? It is the firmware update than most scares me lol
Thank you for the great video! The files on Google drive and step-by-step tutorial were very helpful!
Bryce, quick question, Have you noticed the new module with the USB C? I have a 2019 model without CarPlay.
Hey man! I’ve heard a lot about it but I sold my ND2 quite a while ago. I wish I could help.
Installed the USB Hub today and it is working! Super excited to be using Google Maps and extra Music functionality with my Miata. You rock dude! Do you know if a future firmware release will support touch for Android Auto? The buttons work great, but it would be nice to be able to touch it as well.
can't you just enable touch via "MZD-AIO-TI" program? I think I had it working if I remember correctly but then I got rid of android auto because the program itself is pretty annoying.
Hi there, I followed all the instructions but now there is appears to be constant low level speaker hiss/ white noise. Can anyone help me on where I might have gone wrong?
Hi, thanks for the info and walkthrough. Does anybody have any information on where I can find the EU compatible firmware for the Mazda 6?
Your amazon link to the retrofit now shows a P3 and P3.2 (the latter being wireless carplay and wireless android). Would you say these would be safe to install assuming we do the latest firmware install as indicated? I'd rather take advantage of the wireless (no wire upgrade) if it indeed works on the 2016 MX5 ND1
Now all you need to do is tell me how it works with Android auto. Not use if I understand how to use AA? Great video.
Thank you
Will this soft version work on CX-3 2016? still don't know what software version it will come, my car is on ship for now on way at home 😀 and what format will need USB to be formatted? Thanks.
Just finished this install, one tip - I couldnt get the connector out for the mazda cmu controls (the knobb). So I realized I was able to pop up just the area around the shifter boot (the fake metal) connected to the plastic matt surface. This was a lot easier.
Somebody left an Amazon review on this usb hub that we're all idiots for ripping the dashboard apart when the radio has 4 tabs on it that can be pushed and it pulled out. But I don't remeber if the guy had a Miata or another mazda. I really want to figure out how to get it out without the dash bs this should be a 5 minute job. I bought a car radio tool kit but haven't found the magic touch yet.
This is how Mazda dealers do it. I really wish there was an easier way when I filmed this. But this is the only way for a Miata.
After doing this will touch screen not work, I'm trying to use it and it's not working
@Bryce Thomas, have you tried any the wireless android auto or apple car play modules and it work?
Thats really Helpful. Thanks for the video. Do you also have USB HUB installation instructions for Mazda CX-5? Thanks
Very courageous to unsnap that interior without cracking anything or winding up with any mysterious extra leftover pieces, so thanks for the heads up. But what does Android Auto do for you above and beyond the Miata's standard Infotainment system?
I see kits that have USB-C now. Should I stick to the one you linked or is there a better version now?
Man, I wish you'd do one for my 2017 CX-5 :)
Hi, your video was quite helpful. Do you have any recommendations or videos regarding the installation of backup cameras? Thanks in advance.
Did you disconnected the battery before hardware installation?
Thanks, it helps me 👍
Hi I following your videos as i have a mazda demio 2015 japan import. Do you know how to convert the cmu from jp to eu please? Thanks
How do I get the EU firmware, please?
I own a 2019 MX-5 Grand Touring RF manual and it doesn't have Android Auto. Why did Mazda even design that module that way, making it difficult to upgrade or update? I don't want to go through all that trouble or even let the dealer do it since I've very picky about scratches, smudges, rattles and what have you. Couldn't they have just design that particular module by a couple of screws and merely pull it out and replace it in a similar fashion?
I'm looking for the step-by-step written directions to remove the trim pieces as shown in your excellent video. Are they available somewhere or am I just missing seeing the link? Thanks!
Can you please help with the 4A.N download
Can I update it to a higher version if I already have the Apple Car Play enabled? I have a CX-5 2018 and I updated it ti the version 70.00.00.100 and installed the Hub. I just want to update it to a higher version, I’m wondering if I can use the same Hub and use the USB Port 2?
Wow...great video but what a lot of work! Any other upgrades you might recommend doing at the same time? Mini glove compartment maybe? hahahahha...but seriously, anything else you've done or think can be done if you take the time to take all of this apart?
I know Mazda dealerships are doing the retrofitting for around $200. By the time you buy the kit off Amazon and the dash tools it may be worth it to have them do it.
backup camera: www.flyinmiata.com/rearview-camera-2016-2018-nd.html
i thought were just gonna have to install some softwares but when i saw him break down the vehicle im like aight i dont need android auto and apply play anyways
Any fix for carplay randomly cutting out and screen says “no audio device found” ? I have a anker cable and still have issues
Hi, Thank you for good videos.
I am about to get Android Auto on my MX-5 ND RF 2018.
I have bought the USB hub but struggle to find the firmware for upgrade from EU N 59.XX to 70.XX.
Does any one know were the files can be found?
Br, Lars
Solved by dealer.
great vid.
The directions say to disconnect battery. Do you really have to?
I don't understand why I get (no new update packages available) even though I put the software in the USB drive
Installed on a CX3 2016 pretty simple, was worried because the engine was off and usually I update cars with engine on. After the reinstall I noticed NOTHING absolutely no difference other then the SW version. So unless you are willing to change out the USB i wouldn't recommend this update.
outstanding video. Thanks so much!