Dude, I just got one of these, and your video is the only one who helped me set it up. Gotta say, mine worked via USB C too but you need to use a 2.0 USB port for it to recognize it
So, it wouldn't work with windows 11.. but I figured it out after some research!. When you go to add the mvave chocolate, before adding as a bluetooth device, change the pairing from default to advanced. It will take a few minutes every time you pair it again, but it definitely works!
Hello @wrathofthegravis, we’re happy you found the video useful. Feel free to check out our channel as we have other videos showing how to use the Chocolate controller to control most popular amp sims and software. Also, we have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released. 🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1 Keep Jammin’ Guitar School Live
Hello @bigjalapeno5347, we’re glad you found the video useful. We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released. 🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1 Keep Jammin’ Guitar School Live
Man, thank you very much. My PC is a surface 7 with only one USB port. A hub wouldnt help with the audio interface. This was the solution. I am using the Petrucci Neural DSP.
@@ekapastrawan4946 absolutely yes! A B C D pedals for the pedal effects on DSP. Keep pressed A to transpose down half tones and keep pressed B C D to toggle delay, rever and all those post effects.
Hello @j_add_9, you are welcome. We’re happy you found the video useful. We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released. 🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1 Keep Jammin’ Guitar School Live
Hello @chazmanda, we’re happy you found the video useful. Many users have more than one controller connected via USB. We’re not sure if you can have multiple controllers with Bluetooth. If you decide to give it a try please give an update on the page so others can see your results. We’re curious to know what you are controlling with the Chocolate controller. We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released. 🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1 Keep Jammin’ Guitar School Live
Hello punxtian, nice to hear from you. Unfortunately no one here owns a Mac. However I was under the impression that Macs have built in bluetooth capabilities like the Ipad (the Chocolate connects to my Ipad). Guitar School Live
thanks for this video, all works fine BUT th3 doesn't receive the midi signal, i use th3 in the daw, i do a midi track with loopmidi in the input and th3 in the output, midi is enabled in th3, but it does not receive the signal, have you an idea ??? i have also an audio track with TH3 in the FX, thank you for your suggestions
Hello @matiasmoulin2126, thank you for your comment. Windows does not work natively with many Bluetooth controllers and requires an additional app. The wireless capability of any controller is fine if you’re just using it in your studio, however if you plan on performing live using Bluetooth instead of a cable is not a good option because of the added latency. Latency will be present regardless of any wireless controller you purchase. We hope this helps. We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released. 🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1 Keep Jammin’ Guitar School Live
Quick couple of questions if I may. Not new to guitars or computers, but new to MIDI, and just bought one of these today to provide some hands free functions. Not looking to be spoon fed. Just a couple of pointers if you dont mind. Why is loopMIDI and MIDIberry required to get this working wirelessly with windows? What is the function that Windows is unable to provide, or the manufacturers dont mention? Ive installed both and its detected by my ampsim, S-Gear. Im assuming your setup is similar. PC - Audio Interface - Amp Sim suite. What is the function of the Cubesuite software? Still looking for some documentation etc online to guide me a bit, as I cant get the device working at all in S-Gear. Any pointers much appreciated.
I`m trying to use the M-VAVE CHOCOLATE to arm and disarm tracks in REAPER and can`t find anything on how to program the device accordingly. I`ve downloaded all the proper software (cube suite, etc) and spent hours so far watching and reading everything I could find, but nothing seems to work. There`s a youtube video by REAPER mania doing exactly what I`m looking for but with the iRig BlueBoard, but this footswitch seems to come already programmed for sending proper signal to DAW. If you have any idea on how to make this work, your help would be very much appreciated and maybe a good video for other clueless midi noobs like me! Thanks for all your work and in hopes this reaches you!
Hello @k.y.e.6807, thank you for reaching out to us with your question. Programming the Chocolate controller to arm and disarm tracks in Reaper can be done in 3 easy steps: 1. In Cubesuite set the controller to ‘Program Change mode C’. 2. Close Cubesuite and go to ‘Actions’ in Reaper. Type ‘Track: Toggle Record Arm for Selected Tracks’ in the search box and select the action. 3. Click ‘Add’ in the shortcut box and press a button on the Chocolate and you’re done Feel free to reach out to us again if you need any further assistance with the Chocolate controller. We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released. 🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1 Keep Jammin’ Guitar School Live
@@guitarschoollive I wasn`t expecting such a fast response - thank you!! I tried your suggestion right away but It still doesn`t seem to work! I`ve followed all the steps - cubesuite program change mode C - made sure USB-midi was enabled in reaper - track toggle record arm and clicked add, but the pedal isn`t sending out any signal. Reaper clearly recognizes the hardware but it`s not responding for some reason. I`ve restarted the software and even my computer but to no avail. I use a midi keyboard with no issue but this pedal has been a major headache lol If I`m missing anything or if you have any other suggestions, I`d appreciate it. Thank you again for your time!
@@guitarschoollive Tried it but nothing`s happening - no signal. I downloaded & installed Bt Midi Connector & loopMIDI software along with cubesuite at the beginning, are the software interfering somehow? It`s the only thing I can think of other then maybe I just got a defective footswitch.
Let's try and troubleshoot the problem by starting from scratch to make sure the controller is working. Connect the controller with a usb cord and enable 'USB-Midi in Reaper. See if the 'Add' procedure works. This will let you know if the problem is with the controller and the Reaper setup or the wireless function. Let me know your results.
Hello @stormer268, we’re happy you found the video helpful. We’re curious to know what software you’re controlling with the Chocolate controller. Guitar School Live
I use it for StudioOne6,recording guitar. I can't use keyboard or midi controller when I playing guitar. So the Chocolate is best choice! I wish the CubeSuite more support at Windows.Until now, CubeSuite not work on my PC. Thanks again for this video . @@guitarschoollive
It doesn't work, it does show input midi signal&massage in Midiberry and have the loopmidi port inside DAW but it didn't show any input signal in the DAW.
Hello @redcomn, thank you for reaching out to us with your question. It is possible to control CZcams with the Chocolate controller by simply selecting ‘Video Model’ in CubeSuite. • Pressing ‘Pedal A’ will rewind 5 seconds. • Pressing ‘Pedal B’ will fast forward 5 seconds. • Pressing and holding either pedal will rewind until you release it. • Pressing ‘Pedal C’ will activate Play/Pause. • ‘Pedal D’ will loop the video. We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released. 🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1 Guitar School Live
This one works but it's inconsistent. I tried it yesterday and it worked. But now, I followed everything to the letter but it doesn't work. I think it's with Reaper.
so, the mwave chocolate has bluetooth capabilities, and it is recognized by my bluetooth devices section on windows, but it doesnt work as a midi controller via bluetooth unless you use those programs? Then what is the bluetooth for?
Hello @joserp888, thank you for reaching out to us with your question. The Chocolate controller will work with Ipads and Androids natively via Bluetooth. Some newer Windows machines may connect, however it is reported that the connections are not consistent. We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released. 🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1 Keep Jammin’ Guitar School Live
Hello @donjanithu, thank you for reaching out to us for assistance. If you have a PC and it has Bluetooth capabilities you will not need an adapter. Just make sure you close Cubesuite completely or it will not connect to the PC. We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released. 🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1 Guitar School Live
Hello @@muhammaddzulfikrihaidlahai3204, thank you for reaching out to us. At this time the only way to download MIDIberry is through the Microsoft store. We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released. 🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1 Guitar School Live
hello! I tried to follow these steps; however, I never was able to see the pedal in my available bluetooth devices, do you have any idea why that would be? Thanks!
I have the same problem, I have windows 11 and I can´t see the pedal, but there is a setting under device configuration, something like bluetooth device detection (I have it in spanish) that is set to default, I change it to advanced and now I can see the controller in the available devices
My pc won't detect foot control as a Bluetooth device when searching for a device. It detects my smart phone, but not the foot control. Any tips? And also when I'm trying to use it in Ableton to control the looper it assigns all stomp buttons as "pitch bend 1" so I can only use one button, and even then the button doesn't work. Disappointed in this device so far
Hello @johncanavan111, thank you for reaching out to us for assistance. Let’s tackle the first issue of getting your PC to recognize your device wirelessly. The usual culprit is leaving the Cubesuite editor open. You must close all Cubesuite screens after you perform any edit. The PC gives complete control to the first app that is using it (ex. If you use the controller in Ableton then attempt to make an edit, Cubesuite won’t open). If that doesn’t solve your issue try using it wired via USB to make sure you don’t have a faulty unit. Once you get it working we will move on to Ableton setup. Guitar School Live
I followed these instructions and it wont pair to my pc but will my phone. I have wasted so much time with this device I downloaded programe files off the m-vave website and there is no installer. wtf?
Hello gogo maniac, thank you for reaching out to us for assistance. In order to troubleshoot your issue we need to know is the Chocolate connected in the Bluetooth menu. Does the blue light on the controller flash if you turn Bluetooth off on your computer? Guitar School Live
@@guitarschoollive yes it is connected by bluetooth. The blue light was not flashing. I was using advanced custom mode for it too, as you set it from ur previous video on neural dsp to reaper.
If the light is not flashing when you turn Bluetooth off on your computer then it is connected to another device. Check to make sure it is not connected to a phone or tablet (If you have an Ipad that was charging it will connect to the Chocolate when the charge is complete). Once you get a flashing blue light repeat the setup. Let us know your results Guitar School Live
Hello @vinsrenardeaudouce5286, thank you for reaching out to us for assistance. The Cubesuite software can be downloaded here: www.cuvave.com We have many videos that may be of interest to you. Be sure to subscribe so you will be notified when new content is released. 🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1 Feel free to reach out to us again if your need any further assistance. Guitar School Live
Hello @tigerrat8, thank you for reaching out to us. In the video at the 01:55 mark it states that Midiberry must be loaded from the Microsoft store. We are not aware of a link for the app but perhaps if you do a Google search you may find one. Guitar School Live
@@guitarschoollive thanks for your reply i have been crawling the net for 2 days and can not find another software other than midiberry do you know of another PLEASE
Dude, I just got one of these, and your video is the only one who helped me set it up.
Gotta say, mine worked via USB C too but you need to use a 2.0 USB port for it to recognize it
So, it wouldn't work with windows 11.. but I figured it out after some research!. When you go to add the mvave chocolate, before adding as a bluetooth device, change the pairing from default to advanced. It will take a few minutes every time you pair it again, but it definitely works!
You are the best, solved my problem!!!
how I can do that?
@Need_more_beer it's in the advanced settings in your Bluetooth settings in windows 11.
Thank you! It works flawless.🙏.
These videos should be on the manufacturer's website. They should be grateful to you. I am...
Thank you so much ! this helped me to break free from cables !
Hello @wrathofthegravis, we’re happy you found the video useful. Feel free to check out our channel as we have other videos showing how to use the Chocolate controller to control most popular amp sims and software.
Also, we have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released.
🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1
Keep Jammin’
Guitar School Live
Oh my fucking god. For months I couldn't figure out. Thanks you very much
Hello @bigjalapeno5347, we’re glad you found the video useful.
We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released.
🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1
Keep Jammin’
Guitar School Live
Hey guys. It all worked fine until the midiberry. It does not recognise the Bluetooth on the input list. So frustrating. Any tips?
Thank you, suscribed after solved.
Man, thank you very much. My PC is a surface 7 with only one USB port. A hub wouldnt help with the audio interface. This was the solution. I am using the Petrucci Neural DSP.
Is it working on petruci ?
@@ekapastrawan4946 absolutely yes! A B C D pedals for the pedal effects on DSP. Keep pressed A to transpose down half tones and keep pressed B C D to toggle delay, rever and all those post effects.
Thank you so much !
Hello @j_add_9, you are welcome. We’re happy you found the video useful.
We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released.
🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1
Keep Jammin’
Guitar School Live
I've purchased one. Can I connect this to a MAC wirelessly ? If Yes, is there a tutorial ?
Thanks for the video!! Is it possible to get a second and third chocolate to expand even further?
Hello @chazmanda, we’re happy you found the video useful. Many users have more than one controller connected via USB. We’re not sure if you can have multiple controllers with Bluetooth. If you decide to give it a try please give an update on the page so others can see your results.
We’re curious to know what you are controlling with the Chocolate controller.
We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released.
🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1
Keep Jammin’
Guitar School Live
Another amazing guide! I was wondering if this process is applicable for Macbook aswell. Thanks in advance🙏
Hello punxtian, nice to hear from you. Unfortunately no one here owns a Mac. However I was under the impression that Macs have built in bluetooth capabilities like the Ipad (the Chocolate connects to my Ipad).
Guitar School Live
thanks for this video, all works fine BUT th3 doesn't receive the midi signal, i use th3 in the daw, i do a midi track with loopmidi in the input and th3 in the output, midi is enabled in th3, but it does not receive the signal, have you an idea ??? i have also an audio track with TH3 in the FX, thank you for your suggestions
Thanks for the video! please tell me if it is possible to connect this pedal to the Yamaha thr ii?
Can't get midiberyy to see my foot cntrl, but it is connected in windows
Thanks for the "nothing works until you installed the app"-hint. This ruled the product out for me immediately.
Hello @matiasmoulin2126, thank you for your comment. Windows does not work natively with many Bluetooth controllers and requires an additional app. The wireless capability of any controller is fine if you’re just using it in your studio, however if you plan on performing live using Bluetooth instead of a cable is not a good option because of the added latency. Latency will be present regardless of any wireless controller you purchase. We hope this helps.
We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released.
🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1
Keep Jammin’
Guitar School Live
Help, not showing for me even if I have used advanced bluetooth option
Quick couple of questions if I may. Not new to guitars or computers, but new to MIDI, and just bought one of these today to provide some hands free functions. Not looking to be spoon fed. Just a couple of pointers if you dont mind.
Why is loopMIDI and MIDIberry required to get this working wirelessly with windows? What is the function that Windows is unable to provide, or the manufacturers dont mention?
Ive installed both and its detected by my ampsim, S-Gear.
Im assuming your setup is similar. PC - Audio Interface - Amp Sim suite.
What is the function of the Cubesuite software? Still looking for some documentation etc online to guide me a bit, as I cant get the device working at all in S-Gear.
Any pointers much appreciated.
I`m trying to use the M-VAVE CHOCOLATE to arm and disarm tracks in REAPER and can`t find anything on how to program the device accordingly. I`ve downloaded all the proper software (cube suite, etc) and spent hours so far watching and reading everything I could find, but nothing seems to work. There`s a youtube video by REAPER mania doing exactly what I`m looking for but with the iRig BlueBoard, but this footswitch seems to come already programmed for sending proper signal to DAW. If you have any idea on how to make this work, your help would be very much appreciated and maybe a good video for other clueless midi noobs like me! Thanks for all your work and in hopes this reaches you!
Hello @k.y.e.6807, thank you for reaching out to us with your question. Programming the Chocolate controller to arm and disarm tracks in Reaper can be done in 3 easy steps:
1. In Cubesuite set the controller to ‘Program Change mode C’.
2. Close Cubesuite and go to ‘Actions’ in Reaper. Type ‘Track: Toggle Record Arm for Selected Tracks’ in the search box and select the action.
3. Click ‘Add’ in the shortcut box and press a button on the Chocolate and you’re done
Feel free to reach out to us again if you need any further assistance with the Chocolate controller.
We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released.
🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1
Keep Jammin’
Guitar School Live
@@guitarschoollive I wasn`t expecting such a fast response - thank you!! I tried your suggestion right away but It still doesn`t seem to work! I`ve followed all the steps - cubesuite program change mode C - made sure USB-midi was enabled in reaper - track toggle record arm and clicked add, but the pedal isn`t sending out any signal. Reaper clearly recognizes the hardware but it`s not responding for some reason. I`ve restarted the software and even my computer but to no avail. I use a midi keyboard with no issue but this pedal has been a major headache lol
If I`m missing anything or if you have any other suggestions, I`d appreciate it. Thank you again for your time!
That's odd. Try using 'Program Change Mode A" and click 'Add' in the actions pane to see if it recognizes data from the pedal.
@@guitarschoollive Tried it but nothing`s happening - no signal. I downloaded & installed Bt Midi Connector & loopMIDI software along with cubesuite at the beginning, are the software interfering somehow? It`s the only thing I can think of other then maybe I just got a defective footswitch.
Let's try and troubleshoot the problem by starting from scratch to make sure the controller is working. Connect the controller with a usb cord and enable 'USB-Midi in Reaper. See if the 'Add' procedure works. This will let you know if the problem is with the controller and the Reaper setup or the wireless function. Let me know your results.
Does anyone know if this thing can also connect to macbooks via bluetooth?
Thank you! It works for me.
Hello @stormer268, we’re happy you found the video helpful. We’re curious to know what software you’re controlling with the Chocolate controller.
Guitar School Live
I use it for StudioOne6,recording guitar. I can't use keyboard or midi controller when I playing guitar. So the Chocolate is best choice! I wish the CubeSuite more support at Windows.Until now, CubeSuite not work on my PC. Thanks again for this video . @@guitarschoollive
It doesn't work, it does show input midi signal&massage in Midiberry and have the loopmidi port inside DAW but it didn't show any input signal in the DAW.
Does it have delay when it’s on bluetooth?
can two mvave be combined on one computer?


You're a genius
Thank you for the compliment Claudio! We're happy to see you're still finding our videos useful.
Keep Jammin'
Guitar School Live
@@guitarschoollive is it there a MIDIberry like app compatible with Win 8.1? . I'm a little bit out of date with my OS
Can you Control CZcams with this?
Hello @redcomn, thank you for reaching out to us with your question. It is possible to control CZcams with the Chocolate controller by simply selecting ‘Video Model’ in CubeSuite.
• Pressing ‘Pedal A’ will rewind 5 seconds.
• Pressing ‘Pedal B’ will fast forward 5 seconds.
• Pressing and holding either pedal will rewind until you release it.
• Pressing ‘Pedal C’ will activate Play/Pause.
• ‘Pedal D’ will loop the video.
We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released.
🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1
Guitar School Live
This one works but it's inconsistent. I tried it yesterday and it worked. But now, I followed everything to the letter but it doesn't work. I think it's with Reaper.
It works, but midi berry constantly fails. Can anyone recommend an alternative program?
so, the mwave chocolate has bluetooth capabilities, and it is recognized by my bluetooth devices section on windows, but it doesnt work as a midi controller via bluetooth unless you use those programs? Then what is the bluetooth for?
Hello @joserp888, thank you for reaching out to us with your question. The Chocolate controller will work with Ipads and Androids natively via Bluetooth. Some newer Windows machines may connect, however it is reported that the connections are not consistent.
We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released.
🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1
Keep Jammin’
Guitar School Live
For Amplitube setting help me Bluetooth
mine is not pairing anymore after a supposed firmware update.... any ideas?
Hi,
Is a wireless adaptor need to connect to the computer. Its a bit urgent
Hello @donjanithu, thank you for reaching out to us for assistance. If you have a PC and it has Bluetooth capabilities you will not need an adapter. Just make sure you close Cubesuite completely or it will not connect to the PC.
We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released.
🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1
Guitar School Live
Help!! Pls you have a video using FCB1010 with the Axe Fx2?
Hello Euller Pereira, thank you for reaching out to us. Unfortunately we do not have access to the Axe Fx2.
@ 1:55 strange....1 month later, the MIDIBerry app now only has 3 reviews and a rating of 3.0?
do you have midi berry programe ....because i cant download from microsoft store
Hello @@muhammaddzulfikrihaidlahai3204, thank you for reaching out to us. At this time the only way to download MIDIberry is through the Microsoft store.
We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released.
🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1
Guitar School Live
hello!
I tried to follow these steps; however, I never was able to see the pedal in my available bluetooth devices, do you have any idea why that would be?
Thanks!
I have the same problem, I have windows 11 and I can´t see the pedal, but there is a setting under device configuration, something like bluetooth device detection (I have it in spanish) that is set to default, I change it to advanced and now I can see the controller in the available devices
in Bluetooth & devices setting
Go to > More Bluetooth setting > check Allow Bluetooth devices to find this PC
It solved my problem . i using Win 11.
YOU ARE THE MAN! THANKS A LOT!!!!!
@@alejandrodgalli
@@alejandrodgalli Thank u so much bro, that helps me to connect my M-VAVE SMK25, eres el mejor :D
@@ConfusionXIII Thanks, this helped my problem too. You are the man !!!
My pc won't detect foot control as a Bluetooth device when searching for a device. It detects my smart phone, but not the foot control. Any tips? And also when I'm trying to use it in Ableton to control the looper it assigns all stomp buttons as "pitch bend 1" so I can only use one button, and even then the button doesn't work. Disappointed in this device so far
Hello @johncanavan111, thank you for reaching out to us for assistance. Let’s tackle the first issue of getting your PC to recognize your device wirelessly.
The usual culprit is leaving the Cubesuite editor open. You must close all Cubesuite screens after you perform any edit. The PC gives complete control to the first app that is using it (ex. If you use the controller in Ableton then attempt to make an edit, Cubesuite won’t open). If that doesn’t solve your issue try using it wired via USB to make sure you don’t have a faulty unit. Once you get it working we will move on to Ableton setup.
Guitar School Live
I followed these instructions and it wont pair to my pc but will my phone. I have wasted so much time with this device
I downloaded programe files off the m-vave website and there is no installer. wtf?
They've changed their address since the video was posted. Go to: www.cuvave.com/appdownload from there select 'PC Software' or 'Mobile App'.
Nothing seems to show up in my input monitor after i did the first few steps:((
Hello gogo maniac, thank you for reaching out to us for assistance. In order to troubleshoot your issue we need to know is the Chocolate connected in the Bluetooth menu. Does the blue light on the controller flash if you turn Bluetooth off on your computer?
Guitar School Live
@@guitarschoollive yes it is connected by bluetooth. The blue light was not flashing. I was using advanced custom mode for it too, as you set it from ur previous video on neural dsp to reaper.
I also do not have that mwave midi blueyooyh device(i had forgotten its name) that is supposed to connect to the laptop/pc. Do i need it for this?
If the light is not flashing when you turn Bluetooth off on your computer then it is connected to another device. Check to make sure it is not connected to a phone or tablet (If you have an Ipad that was charging it will connect to the Chocolate when the charge is complete). Once you get a flashing blue light repeat the setup.
Let us know your results
Guitar School Live
Hi ! Cool ! But there is a problem, Cube suite can't bé download from the website... , maybe do you have the install filesn?
Hello @vinsrenardeaudouce5286, thank you for reaching out to us for assistance. The Cubesuite software can be downloaded here: www.cuvave.com
We have many videos that may be of interest to you. Be sure to subscribe so you will be notified when new content is released. 🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1
Feel free to reach out to us again if your need any further assistance.
Guitar School Live
The company updated their website. You can download the software now. www.cuvave.com/
Guitar School Live
везде все подключено, все видит но только ни в одном daw не принимает сигналы
"How to Wirelessly Connect Your M Vave...." Does this mean that it is also connected to the computer via USB?
cant download midiberry NO LINK, looks and feels great just be perpard to deal with Microsoft
Hello @tigerrat8, thank you for reaching out to us. In the video at the 01:55 mark it states that Midiberry must be loaded from the Microsoft store. We are not aware of a link for the app but perhaps if you do a Google search you may find one.
Guitar School Live
@@guitarschoollive thanks for your reply i have been crawling the net for 2 days and can not find another software other than midiberry do you know of another PLEASE
cubesuit not working
@@tigerrat8 If you're using the Chrome browser, the Microsoft Store fails. I switched to Edge and was able to download and install no problem.