Complete Engine removal BMW E60 525i/530i
Vložit
- čas přidán 4. 11. 2021
- In 10 minutes, we go step by step showing how to remove the m54 from a 525i/ 530i. This process is similar on a 528i.
These videos take a very long time to produce so if you enjoy this video, Like and subscribe so I know to make more.
Thanks for watching. - Auta a dopravní prostředky
![How To Remove / Swap An N52 Engine From A BMW E90 E92 In Your Driveway [Part 1]](http://i.ytimg.com/vi/1FNF_jCqvx0/mqdefault.jpg)
![How To Remove / Swap An N52 Engine From A BMW E90 E92 In Your Driveway [Part 1]](/img/tr.png)
My E60 has been sitting due to engine problems, this video makes me think about keeping it as a project
Great vid, I leave the trans in when I do these just remove the driver motor mount bracket it helps clear the steering rack, hang the AC and power steering to the side, (the service manual says to evacuate and unbolt lines for ac idk why?) Done. Lots of wiring and hoses to undo. I love it
This video helped really helped me pull a m54b30 out of a e60 for my e46. Thanks for making it
Glad I could help.
Excellent work I enjoyed it
Awesome video bro! Let's see that engine go back in!
Awesome job!👍Let's see the engine reinstalled.
Good video!!
Thanks for infomations...
Great vid…plz show the install of the engine…👍👍👍👍
Yes. Totally agreed
After watching that it's put me off haha! I want to pull the motor out of my 07 bmw but oh my goodness bucket load of bolts screws and clips lol. But ive got plenty time on my hands
The process is slightly different on a 2007 model but should still be doable. I hope this helped. Thanks for watching.
Awesome Video, The transmission have to Go out?, you think is more Work keep the transmission on the Car?
thanks!!
Nice
Is the parts interchangeable for a 2005 525i & 2007 530i ? Can I Used 07 Parts To Rebuild The 05?
Where to hook chains?
Can we fit 525i engine in 530 I
What's your opinion on dropping the subframe, with engine and transmission connected, when replacing the transmission and turbos on a 535d?
In your case, it is likely easier to drop the subframe with engine/ transmission. I found it a little difficult to reinstall everything back in because the header kept getting stuck on the subframe. I assume it would have been even more difficult with the turbos.
@@Rurik_JustCruzn Thanks for your reply. That's exactly what I was afraid of. This is my daily driver, so I think I'll replace one thing at the time to keep the down time low. Also, I don't have a lifting table, and I guess using a two post lift to manuvre everything out and in again, may give me some trouble. Just found your channel. Will check out your other videos too. Big thumbs up.
Nice job and well documented! How long did it take?
Shouldn't take you long. Found inclines have a lot of room and it took me 2 days with no knowledge
@@choricho1941may i ask, did you remove transmission as well? Or left it , and which model
I have a 520i, that might need an engine swap soon. Just curious, if I change to an engine of a 523/525i, would I need to change anything else? (Computer related)?
An engine swap will require numerous other things including but not limited to: engine mounts, accessory drive, wiring, computer, programming, etc.
So easy.....
do u have to reuse the old injector to avoid reprogramming injectors?
Reprogramming injectors is not a concern for vehicles with an m54
Do u think a 4.8 v8 engine from a 2007 550i bmw fits in a 525i ????
It's the same chassis and engine bay, so it will definitely fit. The problem is changing everything over to support the new engine.
was it really that simple?
Just do everything in the right order backwards no need for instal
I gotta 06 530 motor would it fit in my 525?
As long as the engine is an m54b30. It should bolt up just fine. The only problem is that it will require a different tune.
Is e60 a 4-wheel drive car?
They were offered in both rear wheel drive and all wheel drive. The car in this video is rear wheel drive.
How many day it took to remove and install?
It was about a 3 day job for a DIYer to remove and replace the engine
How long did the complete removal take
6-8 hours filming. Without the camera I could probably do it in 4 to 5 hours.
Your job is so good
But you making that very dificult
When i remove engine bmw models
Often i move from under engine and it is very easy
The contitioner, radiators, sterring wheel pump is on the car
Also front parts.
Also i take it gearbox