Skoda Yeti vw audi Instrument cluster light led repair ASMR :)

Hello guys ! This is another video with another quick fix for vw skoda yeti audi instrument cluster lights, be aware that instrument cluster it’s a very sensitive piece of hardware, don’t hurry and be very cautious. The cluster/dash didn’t have any backround lights , so.. first just resolder any dry joints of cluster connector and check for fried led’s and signs of moisture.. this is what i call an easy repair. If you have problems with power supply or any piece of hardware .. well.. maybe later i will cover this subject also.. Consider subscribing to my channel , thanks for watching !
Contact: [e-mail]

[@Brazylizsek]

This is exactly what I needed. Thanks dude, wish you and your family well!

[@amperugarage]

Thank you!

[@SuperRaduRO]

Beautiful,Good Job!

[@AM-Training-Kennels]

Thanks great video

[@amperugarage]

Thanks !!

[@sara78130]

Thanks 😊

[@filipesilva1395]

I would like to replace the dashboard lamps for a Octavia 2006,how I find which type of lamps I need?

[@user-kn6wu1xn9p]

Hi, can you point me in the right direction for the led so i can buy some. Great video by the way

[@user-nu4nq7sg3f]

I have my left turning indicator fading and appearing, could it be rather bad grounding than led fault?

[@capitanandy2535]

Its not simple eh😅.....but....in the first yeti model 2009 is the same ???...or normal lamp inside?

[@jcerna111]

Hi! Great video! Could you help me? I'm trying to repair VW GOLF 6 instrument cluster. In my case, rpm counter Illumination and central display Illumination did not work. I replaced 3 LEDs on rpm counter side and now all rpm counter LEDs work good, but central display LEDs still don't work. I tested them and all work fine. What could be the problem? Do I have to resolder main connector like you did? Thanks!

[@amperugarage]

Check polarity and dry solder joints with microscope

[@boukharitemessek2596]

Very clear and instructive video but you don't explain why you turn the needles counterclockwise to get them out and how to put them in place correctly a little more explanation would be helpful

[@eddydar]

What about the needle illumination my rev counter has gone off completely and my speedo is flickering onnand off.

[@amperugarage]

There are two for each needle, chenge the led’s

[@ryanh3285]

Can you test and diagnosis this before removing with a scan tool i have glow olug issues and I don't see the symbol at all just thinking it could be the bulb that's faulty and leading me down the wrong path

[@amperugarage]

Test all warning lights with vcds, enter instrument cluster

[@PanayiotisMavrokefalos]

Hello! Exactly the video i was looking for. Already have the leds on the way. What type of resistor and external power you used to bench test the leds? is it 5v or 3.3v?

[@amperugarage]

It’s an 12v power supply with 1k resistor (1000ohm’s)

[@PanayiotisMavrokefalos]

@@amperugarage lovely. And one last question. Will the gauges need any type of calibration when i install them back in?

[@amperugarage]

@@PanayiotisMavrokefalos they need to stay in initial position , remove them anti clockwise, if not, trey test with vcds

[@PanayiotisMavrokefalos]

@@amperugarage Okay thank you so much you just saved me a dashboard replacement

[@amperugarage]

@@PanayiotisMavrokefalos i will try to make a video for vag, i get this question a lot. How do you put them in the same position, i am sure that you find a video for that on youtube.. it s the same on skoda, vw

[@sallywareham5787]

Any chance you know what size smd lights are on skoda octavia dashlights ?

[@gabrieliftime3179]

smd 3528

[@BharathBalan63]

Thank you for this awesome video. What's the part number / spec for those replacement LEDs ?

[@amperugarage]

Search for smd led 3528

[@vaseks1675]

@@amperugarage please what brightness mcd or Lumens??

[@ibrahimyahya2639]

Can you share the link to buy this light as i have same issue with my seat Ibiza

[@amperugarage]

I don’t have a link, most of led’s are from faulty instruments, but try on google smd led 3528.. see if they fit on your cluster

[@Steve-ob2zg]

How do I test LED’s? What battery or voltage are you using when connecting the wires?

[@amperugarage]

3 volt

[@Steve-ob2zg]

Spot on thanks, so I can just use a 3v battery. If the cathode / anode are accidentally reversed will it damage the LED?

[@amperugarage]

@@Steve-ob2zgyes/no

[@Steve-ob2zg]

@@amperugaragegreat thank you for your help 👍🏼👍🏼

[@rajko666]

My dash light is flickers in some moments and blinkers are working ok but out of sync. Does someone know a reason?

[@YoIkBenNielsEnIkFaal]

Same problem I had. For me it were broken wires at the front door hinges. This causes the can bus to have intermittent faults, causing the issue. It is a common problem apparently and can be fixed by prying back the rubber boots between the door and repairing or replacing the affected wires.

[@christiansiezenis8093]

Ou trouver led led quel voltage moi ça n éclaire plus compte tour skoda yéti
Cordialement

[@amperugarage]

Try 3528 smd

[@christiansiezenis8093]

Je n ai pas compris désolé

[@amperugarage]

@@christiansiezenis8093 search with google : smd 3528

[@christiansiezenis8093]

Ai ok merci 👌🏻👌🏻👌🏻👌🏻