Busting Concrete with skid steer hydraulic breaker

Kubota svl75 standard flow (18.8 gpm) and Paladin SFB500 hydraulic breaker. The breaker is from a local rental company. Concrete slabs were roughly 15 inches thick with a couple rods of rebar.
Worked incredibly well!

[@Ambidextrousinc]

Seems like a point on the bit would have helped a lot.

[@Rprecision]

That has to be hard on machines running a breaker

[@JerichoRally]

Sure is. But the pins and bushings at the hitch are brand new and I greased it well prior to operating. Only ran it about 3-4 hours. If I did this often, I'd have a beater machine dedicated to the hammer.