Before you do this, use a chain or strap around the arms so you don't spread the arms apart. I've also been told that using a co2 fire extinguisher works quite well. czcams.com/video/5SZIiPe0k-A/video.html
@@JerichoRally Thanks. I bought a new fitting hoping it would do it, but it still wouldn't take grease. I'm hoping I can pull the pin, clean it, and it will be good again.
Can’t get mine out! Stuck like Chuck! Going to try a 20 ton ram
czcams.com/video/5SZIiPe0k-A/video.htmlsi=qF0r4m-eRt8ATyL9
How did you remove the loader arm pin? Mine aren't taking grease.
Before you do this, use a chain or strap around the arms so you don't spread the arms apart. I've also been told that using a co2 fire extinguisher works quite well.
czcams.com/video/5SZIiPe0k-A/video.html
The pin.... would help to read! Sorry. Use heat if you have to and just beat the thing out.
And check the zerk fitting. It might be bad.
@@JerichoRally Thanks. I bought a new fitting hoping it would do it, but it still wouldn't take grease. I'm hoping I can pull the pin, clean it, and it will be good again.
@@JerichoRally Have you ever used a hydraulic gear puller?