Maytag Washing Machine Leaking Oil - The Transmission Oil Seal
Vložit
- čas přidán 4. 09. 2024
- Maytag Washing Machine Leaking Oil - The Transmission Oil Seal
Replacement parts amzn.to/42FGHAV - paypal.me/Ange...
Warning: Use the information in this video at your own risk
Very clear and informative video. Thank you for helping me keep my 35 year old washing machine running
I got the brake off with out a tool; just clamped a vise-grip on it and wailed away at it with a big hammer! One note: be sure to lock down the shaft somehow, because I broke the plastic gear in the transmission during all the wailing! That fact changed the operation from a repair job to a scrap job.
Sorry to hear that. these old washer could be fixed but you need the tools and the break tool is hard to get and is expensive too,
This dude is the man, I hope he's still making videos
That wrench seems impossible to find
the best instruc to fix any washers thanks for your help!
Thank You For Watching My Videos
Click on the link below to check my website
www.do-it-yourself-washing-machine-and-dryer-repair-help.com/
Angel theapplianceman
El jefe! Eres buen trabajadoro!
Thank you so much, your videos are excellent!
(Hope my Spanish is good).
Good instructions but you can also use pipe wrench on transmission side to hold from spinning. Wedge on the barrel legs it works
Thank you. I believe that I can do this myself after watching this video.
Visit my website for more free videos in order according to the washer or dryer problem
www.do-it-yourself-washing-machine-and-dryer-repair-help.com/
Thank You
Angeltheapplianceman
This guy is a Saint.
Excellent video. Thank you.
gracias por tu explicacion, me ha servido de mucho. exelent explications. thank for you video. congratulations ,hi from venezuela.
Me ha servido de gran ayuda con tan buena explicación y procedimiento!
While doing this repair, are their other parts that should be replaced after 20 years of use?
What about the older ones that have the brass bushing there and an O-Ring in the transmission hosuing?
i am having trouble starting the lip seal. The OD of the seal seems too large for the bore that the it is being pressed into. I have part number 207843. The OD is .835 . the ID of the bore is .770. That is a tight press fit. Is there another seal part number that may exist for my Maytag LAT3500AAE? Thanks
Is there anything you can try if you don’t have the brake tool?
Thank you for these excellent videos! Can I replace the oil without taking the cover off? Is the other side of the transmission (the pointed side) a fill plug?
I won't weary about oil unless it has lost a lot of oil
My old washer has leaked out its oil over the years, 19 to be exact. Instead of taking the cover of the transmission off I myself will put a small hole into the cover, towards the top end of the tranny and fill my tranny with enough oil to keep it going strong.. The hole will be sealed with a tire patch for a tube or tire. Very sticky are most tire/patches. I will also cover the patch with a small amount of automotive grade silicone to make sure my patch job' doesn't pull away or leak. If by a rare change my idea fails I'll pull the cover and weld up the hole and replace the lost oil again the proper way. I'm doing this due to being disabled and I dont want to disassemble the whole machine after replacing the motor with a new one. Clean the cover extra good with brake cleaner or a product that cleans off oil residue before applying patch. Try this fix at your own risk folks! I'm a mechanic so I can fix just about anything. Since there was no fill point on the tranny I knew there must be a way to add oil and this man just taught me how to do it, I thank him very much sir. for that info..
nice video and very well done. thanks! Are there any work arounds for not having the spanner wrench tool 038315 ? can i use my air hammer to tap the brake package free?
I did use a flat punch and a hammer to tap it around. Spray some penetrating fluid on the threads and give it some time. You can get it off.
Are you still doing appliance work? we have not seen new uploads for a while.
Our maytag washer transmission is leaking... they said they have to replace it for 500.00 are they just going to repart it? Where to get the brake tool.. and how much.. if your going to use it once... does it work with just maytag.. is it worth getting for future repairs?
Break tool is no longer available. Some one said they used a brass punch and a hammer.
The oil you are using is a spur gear oil. Can i use a good qulity SAE 90 gear oil.?
Yes.
The brake tool is no longer available anywhere on line. Any suggestions? Make one?
eBay!
@@mcw0530 Did not see one on eBay 3 weeks ago.
davekintz Set a search to email you alerts. Be sure to sell yours on eBay after to pass on the luck to others!
It is not available any longer
strap wrench possibly?
oil leak இருக்கும் போது machine ஓடலாமா
Yes, but get it repaired soon before the transmission oil fluid gets to low and destroys your gears.
"to remove this seal you'll need this tool but it costs about $90" 😢🤬👎
"now lemme show you how to save $90 by removing it with a screwdriver and a knife" 🎉🕺🤙
And the brake tool is $180+Tax. Look for a used washer for same price.
What is th as t part number 038315 called
What is it called