For steam deck users that are modding on it : choose to install it as an asi in the setup (when given the installation options like "AMD gpu") Otherwise it will overwrite version.dll wich is required by Cyber Engine Tweaks
@@GrownUpGamingGUG no worries, I banged my head against my deck for hours before realising that it was this file that was overwritten (tried to blame it against redscript red4ext or others before finding the culprit)
Thank you! I just had this issue and by replacing the file "version.dll" with the original that comes with Cyberpunk 2077 fixed my mods (CET stopped working). I've been testing the DLSS mod though but I ended up getting rid of it because I felt like too much input lag... Maybe it's my Steam Deck.
I had delay issues with DLSS on (LCD from microsd card) and its fixed by seperating framerate limit from refresh rate (in deck settings) unlocking frame rate limit, and setting refresh to 60
steamdeck LCD version tested, PROTON experimental ： The visuals appear to experience some lag and occasional instability. During explosive sequences, there seem to be minor inconsistencies in the debris rendering. The OLED version may perform better.
Is this a better FSR 3 frame generation mod than the one you showed a few months back? I'm still running that mod... if this one works better I might be interested. :)
I think it's better to play it at 30/40 fps without the mod than with it. Out of curiosity, I tried it and everything works, everything is explained nicely in the video, but... You say that there is no ghosting, etc., and yet it is very visible in the game. Especially when you're driving :) Even in your video you can see that the rear bumper doubles when you're driving. I don't know why, but after installing the mod, the steam deck fans run at ~6000 from the start of the game in the menu itself. I didn't have this before. The first time, the deck turned off after about a minute oO
hi guys i have figured it out, u need to choose dxgi.dll (4th option) and it works with my cyber engine tweaks (version 1.32.2). it took me an hour to solve that @#$%!
Just tried it on my PC with a RTX 3060 Ti and it worked well for Cyberpunk 2077 and Remnant II but got a black screen when I tried it with A Plague Tale Requiem.
@@GrownUpGamingGUG Ill try to capture a video and post it once i get back from work. what settings do you use for witcher. maybe its cause i use high settings that there is a lag
Hi I've been searching everywhere and can't find the answer you might know. So I took my steam deck out of beta mode ,beta causes proton tricks not to work right now .since I left beta I left family share it says my cyberpunk isn't mine but the store says I own it . Anyways lol If I turn on beta to leave family share the right way do you think that will disturb my cet mods if they are already installed ?
I did this and there's a tearing happening in the lower part of the screen. You won't see it at night time but in day time when you're driving so fast you can see the lower screen tearing apart.
@@GrownUpGamingGUG tbh I panicked after seeing the ghosting I thought I broke my deck. Lol I uninstall it immediately. I didn't know there's a fix to that ghosting.
It runs pretty well natively. I've not tried lossless scaling with cyberpunk 2077. I've tried the FG mod but there's a little bit of ghosting at the bottom so I turned it off.
Thank you for the Video. . Problem is that in Phantom of Liberty the performance goes down to 25 fps . So FG feels laggy. PL DLC was for ps5 only and not for ps4 anymore . I think thats the problem. you should give the game one more chance . The story is fantastic. PL even more amazing
yes lots of people say it's a great game, maybe when i have time. so many good games coming out this year. i'm excited for black myth wukong, and yesterday announced a new 2D Zelda which looks amazing!
@@GrownUpGamingGUG The file you took and copied to the deck home screen on desk top mode because you had to use it for one of the last steps. I didn't have that file.
@@GrownUpGamingGUG I can't find it. I installed it the wrong way. I didn't copy the path like you did. I thought I found the right spot lol . I'm going to try to search for it
@@GrownUpGamingGUG saved this and your other vid about installing the mods to cyber punk gonna do it after works thanks! Can't wait to try it already looks amazing on steam deck really surprising👌 .
@@GrownUpGamingGUGi just tried doing the same exact thing shown here in the video and it’s working perfectly for alan wake 2. thank you so much! completed the game without any mods and can’t believe how much better it runs now.
you can just leave the mod files in and just remove the launch options and the game won't load with the mod. else you need to double check the mod files and delete them.
Hi there, great video. How do you skip the red launcher? When I run cyberpunk it opens the red launcher, which then blocks the launch options you give it I’m assuming because I can’t see the DLSS frame Gen option once cyber punk is running. Any ideas would be greatly appreciated
This mod's prerequisite is the game needs to have dx12 and dlss2/dlss3 natively. Whether it works for all games that meet this requirement I'm not sure, some games still might need to make adjustments.
Because it's easy to install on windows so not much to show 😂 these mods are designed to be installed on windows, it's getting them to run on steamos that's exciting for me.
thanks but I tried with the Heroic GOG version, and it does not work, I do not have DLSS3 in game options ... maybe there is something to add in the command line because, as the heroic launcher is used in my case, there is already a command line "run com.heroicgamslauncher.hgl --no-gui --no-sandbox "heroic ...". I tried writing WINEDLLOVERRODES ... %command at the beginning but no success ... game launches but no DLSS. Any idea ?
@@GrownUpGamingGUG yeah. I figured it out. It was my version of proton. The latest version makes my game crash, so I downloaded ge proton, and that fixed it
I think my game updated, and now Cyberpunk runs at barely a frame per second. Could it be that I need to update DLSS. Or is there a way to downgrade my Cyberpunk game?
I must be using a diffrent frame gen mod I get mad ghosting and horrible frame time with my mod, the frame time is fixed if I lock to 60 fps but then I'm met with unplayable input lag, I have a steam deck oled
@@GrownUpGamingGUG no I downloaded mine about a month ago and I belive the mod was specific for cyberpunk but recently the frame gen has been extremely choppy and I have crazy ghosting effect while driving and around the edges of my screen when I move my camera, I think the mod was "FSR to dlssfg" I could be mistaken but I know I got it from nexus mods
heyy gug, i wanted to download mods for ac unity but i need a mod manager named anviltoolkit, when i try to make it as a non steam game it asks me to download a .Net windows thing, which i dont want to download. is there anyway i can bypass this? i apologize and thank you for your help you’re the best
If you have the non-steam version it should be fine. The steam version, if you change API from vulkan to dx12, the game crashes, I haven't found a way to make it work.
@@GrownUpGamingGUG I tried again and again, nothing worked. However, the mod from luke fz seems to work, I can turn on the Frame Gen, but if I turn on dlss, the game crashes. I have a pirated cyberpunk, maybe that's the case (although it works on a computer)?
Hey there, just wanted to mention Starfield has FSR3 Frame Gen built in already, and gets good frame rates when turned on with the GPU Pinned to 1600 in the Steam Overlay. There is a little visual artefacting but Hope this helps.
@@GrownUpGamingGUG I’ve got 160 hours on the Steam Deck, fantastic game but it‘s definitely a slow burner. I’d recommend trying it again, lots of new updates since launch and lots more coming
@@GrownUpGamingGUG OK, thanks. But it still can't start. But I can start it after selecting the compatibility layer proton9-2. Using this new launch option seems to be more stable, thanks
@@GrownUpGamingGUG I don’t have the information, I don’t know. It’s available on steam and it is supposed to be compatible with the steam deck. Im asking because I’m not knowledgeable when it comes to things like this.
For steam deck users that are modding on it : choose to install it as an asi in the setup (when given the installation options like "AMD gpu") Otherwise it will overwrite version.dll wich is required by Cyber Engine Tweaks
@@Robin.F96 thanks for sharing 👍
@@GrownUpGamingGUG no worries, I banged my head against my deck for hours before realising that it was this file that was overwritten (tried to blame it against redscript red4ext or others before finding the culprit)
@@Robin.F96 👍 the dlss enabler installer has an option for heavily modded version and I used that when I installed CET.
@@GrownUpGamingGUGyes that's the "install as asi" option I commented about,
Thank you! I just had this issue and by replacing the file "version.dll" with the original that comes with Cyberpunk 2077 fixed my mods (CET stopped working).
I've been testing the DLSS mod though but I ended up getting rid of it because I felt like too much input lag... Maybe it's my Steam Deck.
I had delay issues with DLSS on (LCD from microsd card) and its fixed by seperating framerate limit from refresh rate (in deck settings) unlocking frame rate limit, and setting refresh to 60
Yes, don't limit frames and don't set the scaling to fsr on steam deck settings.
steamdeck LCD version tested,
PROTON experimental ：
The visuals appear to experience some lag and occasional instability. During explosive sequences, there seem to be minor inconsistencies in the debris rendering.
The OLED version may perform better.
Thanks for sharing 🙏
Thanks man. It works. :D
Yes it's great 👍
Nice video! Can you make a Wolvenkit tutorial video for Cyberpunk2077? I have been struggling & don’t know how to install Wolvenkit on my Steam Deck
@@syarilshah6462 thanks for the request 👍
Just bought this for 30 lol 😆 I'm gonna download this later today
Great 👍
Thanks a lot for doing this! :)
My pleasure! Thanks for leaving a comment 😁
Is this a better FSR 3 frame generation mod than the one you showed a few months back? I'm still running that mod... if this one works better I might be interested. :)
@@TWISKED there might be differences but I can't notice it. I can only notice one thing, this is free! 😂
I think it's better to play it at 30/40 fps without the mod than with it. Out of curiosity, I tried it and everything works, everything is explained nicely in the video, but... You say that there is no ghosting, etc., and yet it is very visible in the game. Especially when you're driving :) Even in your video you can see that the rear bumper doubles when you're driving. I don't know why, but after installing the mod, the steam deck fans run at ~6000 from the start of the game in the menu itself. I didn't have this before. The first time, the deck turned off after about a minute oO
Yeah I just noticed the bumper when driving, small price to pay I guess. It's a free mod, you can turn it on or off. I like having options 😂
This mod totally kills Cyber Engine Tweaks, causing problems with the 'versions.dll' file. How can I fix that?
If you already using a mod that uses versions.dll then when you do the installation of this mod, select winmm.dll instead.
You can choose to install it as an asi (it's written in the setup asi is recommended for modded games)
bro, try DXGI.DLL option, it worked, now i have dlss and cyber engine tweaks working, im so fckn happy! took damn an hour to fix that shit...
hi guys i have figured it out, u need to choose dxgi.dll (4th option) and it works with my cyber engine tweaks (version 1.32.2). it took me an hour to solve that @#$%!
@@nayman2374 lol 😂
Just tried it on my PC with a RTX 3060 Ti and it worked well for Cyberpunk 2077 and Remnant II but got a black screen when I tried it with A Plague Tale Requiem.
I got it to work with A Plague Tale Requiem on steamOS. But it has hud flickering.
Excellent videos bro. i tried the same for witcher 3, i noticed a very noticeable input lag with Frame Generation ON. do you notice it?
No I don't. Do you have a video you can share?
@@GrownUpGamingGUG Ill try to capture a video and post it once i get back from work. what settings do you use for witcher. maybe its cause i use high settings that there is a lag
I'm using graphic preset high as well. Turned of motion blur.
I have tried on Ratchet and Clank, reduced latency by a lot using Latency Flex
@@CyberEu Whats that? and does it work with other games?>
done everything and when game starts it only appears black screen ? game is steam version ? can anybody help ?
Do you have any other mods that use the version.dll?
Hi I've been searching everywhere and can't find the answer you might know. So I took my steam deck out of beta mode ,beta causes proton tricks not to work right now .since I left beta I left family share it says my cyberpunk isn't mine but the store says I own it . Anyways lol If I turn on beta to leave family share the right way do you think that will disturb my cet mods if they are already installed ?
I think it's fine, try it out.
@@GrownUpGamingGUG haha ok I'm gonna try today thanks 😎
@@koammudo43 you're welcome 😁
Thanks! Youre my favorite channel. I tried this with Horizon Forbidden West but not seeing DLSS as an option. Any advice?
czcams.com/video/8Hpr4StIGYw/video.html I have a video guide for that game, try it out.
@@GrownUpGamingGUG awesome! Thanks for the reply!
@@furypesto you're welcome 😁
Great tutorial. Do you know if increasing the graphics memory to 4 GB also helps?
It should help. I'm mostly on 4gb vram.
I did this and there's a tearing happening in the lower part of the screen. You won't see it at night time but in day time when you're driving so fast you can see the lower screen tearing apart.
Yes I noticed I had a bit of ghosting while I was driving too.
@@GrownUpGamingGUG it's sucks. I have to uninstall the whole thing. And install it again.
You can just remove the launch options command and the mod files.
@@GrownUpGamingGUG tbh I panicked after seeing the ghosting I thought I broke my deck. Lol I uninstall it immediately. I didn't know there's a fix to that ghosting.
Nice video as always.
Thanks for the visit 😊
Is this mod resolution-specific? I remember Witcher 3's mod not working on anything but 800p, with severe stuttering and ghosting on 720p.
@@TrashTalkin I'm not sure if I tried other resolution on the steam deck.
Can you do this kind of mod with Elden ring with the NEW DLC.
Thank you!
czcams.com/video/WGPYaE96-kQ/video.html only PureDark's mod works currently but it's a paid mod.
well well well thank you man so much
Glad I could help :)
Thanks bro. I tried it and got it working.
Does this mod work for BG3 too?
czcams.com/video/CEO9_IAOE28/video.html I think only PureDark's mod works for bg3 currently and it's a paid mod unfortunately.
I wish we can get the Elden ring framegen mod for free.
Elden ring is dx11. Puredark found a way to make it work on dx11 so we need someone else to figure it out and offer it for free.
What would be the best way to play this on the Legion go. With this mos or with lossless scaling x3?
It runs pretty well natively. I've not tried lossless scaling with cyberpunk 2077. I've tried the FG mod but there's a little bit of ghosting at the bottom so I turned it off.
Thank you for the Video. . Problem is that in Phantom of Liberty the performance goes down to 25 fps . So FG feels laggy. PL DLC was for ps5 only and not for ps4 anymore . I think thats the problem.
you should give the game one more chance . The story is fantastic. PL even more amazing
yes lots of people say it's a great game, maybe when i have time. so many good games coming out this year. i'm excited for black myth wukong, and yesterday announced a new 2D Zelda which looks amazing!
So i didn't get that file to go into at the end the disable one to run wine tricks again . There are slot of files thay say error lol 😭
Sorry what?
@@GrownUpGamingGUG The file you took and copied to the deck home screen on desk top mode because you had to use it for one of the last steps. I didn't have that file.
DisableNvidiaSignatureChecks.reg file? It's in the mod files after you install it.
@@GrownUpGamingGUG I can't find it. I installed it the wrong way. I didn't copy the path like you did. I thought I found the right spot lol . I'm going to try to search for it
I have to download this 👌
It's great 😃
@@GrownUpGamingGUG saved this and your other vid about installing the mods to cyber punk gonna do it after works thanks! Can't wait to try it already looks amazing on steam deck really surprising👌 .
Can you please make one for Alan Wake 2? Just re-downloaded it to play the DLCs.
Thanks for the request. I'll try, no promises 🙏
@@GrownUpGamingGUGi just tried doing the same exact thing shown here in the video and it’s working perfectly for alan wake 2. thank you so much!
completed the game without any mods and can’t believe how much better it runs now.
That's great 👍
Does this mod disable achievements? And will it create an issue using a cloud save between deck and PC?
Not that I'm aware of but I'm not using the steam version so don't take my word.
whats the resolution on steam deck ? it looks really blurry, but i have it on a big screen here, i guess u cant tell on the smaller screen ?
@@Shadowclaw25 yes I'm using 800p as i play on steam deck screen mostly and it's better performance obviously.
sadly i screwed my game up doing this, now trying to figure out how to uninstall all the components
you can just leave the mod files in and just remove the launch options and the game won't load with the mod. else you need to double check the mod files and delete them.
Спасибо за информацию, можешь сделать такое видео для Ведьмак 3 ?
Here czcams.com/video/YsrQgbwwdbo/video.html
There a severe audio cracking when there’s a lot of audio sounds going on anyway to fix that?
Not really sure about that
Hi there, great video. How do you skip the red launcher? When I run cyberpunk it opens the red launcher, which then blocks the launch options you give it I’m assuming because I can’t see the DLSS frame Gen option once cyber punk is running. Any ideas would be greatly appreciated
I'm using non-steam version, maybe that's why.
@@GrownUpGamingGUG I added “ -launcher-skip” to the launch options above and now it’s working. Thanks for the quick response!
That's great 👍 thanks for sharing
Thanks💯
Thanks for leaving a comment 😀
horizon forbidden west please
Thanks for the request, I'll try, no promises ☺️
tried it with Spider-Man miles Morales. Dlss worked but Frame gen was still grayed out so i gave up, maybe you can give it a try.
Thanks for the request. I will try it eventually. I'm trying ghost of tsushima and horizon forbidden west now.
@@GrownUpGamingGUG I just finished the game. It was shorter than i expected so no worries.
Thanks for the updates.
Make one for Baldurs gate 3
czcams.com/video/CEO9_IAOE28/video.html I have one but it's not free
Can you try this mod on phantom liberty
This is already the game with phantom liberty.
So this will work in any game that has dlss frame gen?
This mod's prerequisite is the game needs to have dx12 and dlss2/dlss3 natively. Whether it works for all games that meet this requirement I'm not sure, some games still might need to make adjustments.
Thank you and i have a question. Why u dont try it on lenovo legion go? 🤔
Because it's easy to install on windows so not much to show 😂 these mods are designed to be installed on windows, it's getting them to run on steamos that's exciting for me.
@@GrownUpGamingGUG oki ty 🙏
Thank you
You're welcome 😁
Tes Horizon forbidden west please 🙏🏿
Thanks for the request 😊
Is this mod worth swapping for LukeFZ's mod?
Well one is paid and one is free.
thanks but I tried with the Heroic GOG version, and it does not work, I do not have DLSS3 in game options ... maybe there is something to add in the command line because, as the heroic launcher is used in my case, there is already a command line "run com.heroicgamslauncher.hgl --no-gui --no-sandbox "heroic ...". I tried writing WINEDLLOVERRODES ... %command at the beginning but no success ... game launches but no DLSS. Any idea ?
czcams.com/video/YsrQgbwwdbo/video.html this may help you with those launch options :)
@@GrownUpGamingGUG You rock dude ! Thanks :)
@@alucardxs77 you're welcome! happy gaming! :)
what's the difference respect lukefz mod? which one is better and easier to install/configure?
Both are great, but only one is free 😂
I've paid the lukefz patreon but I don't know how to install and configure it, i think i will follow this free method at this point
@@andrea-sr8rw I have many videos for LukeFZ FSR3 FG mods, you can check them out.
So an issue that I am having is the toggle for “DLSS Frame Generation” is grayed out for me. Do you know what this could be? Did I miss something?
Can you toggle dlss?
@@GrownUpGamingGUG yeah. I figured it out. It was my version of proton. The latest version makes my game crash, so I downloaded ge proton, and that fixed it
That's great 👍
I think my game updated, and now Cyberpunk runs at barely a frame per second. Could it be that I need to update DLSS. Or is there a way to downgrade my Cyberpunk game?
Can you do one for Metro Exodus? Can't seem to get it to work.
Thanks for the request 😊
ghost of tsushima next
Thanks for the request ☺️
Hey Dude i got a issue, after doing all your steps, cp wont start, can it be that cp runs over heroic gog launcher?
czcams.com/video/YsrQgbwwdbo/video.html it's a different method if you're game is installed with heroic. Try this video instead.
Where is the command of launch option to copy and paste? I can't find it on video description.... Help me please
WINEDLLOVERRIDES="version,dxgi=n,b" %COMMAND%
Thanks
You're welcome 🤗
I must be using a diffrent frame gen mod I get mad ghosting and horrible frame time with my mod, the frame time is fixed if I lock to 60 fps but then I'm met with unplayable input lag, I have a steam deck oled
Oh? That's strange
@@GrownUpGamingGUG I do have a different mod but I'm going to try this one tomorrow
Oh? You didn't download from the link in my description?
@@GrownUpGamingGUG no I downloaded mine about a month ago and I belive the mod was specific for cyberpunk but recently the frame gen has been extremely choppy and I have crazy ghosting effect while driving and around the edges of my screen when I move my camera, I think the mod was "FSR to dlssfg" I could be mistaken but I know I got it from nexus mods
Lol 🤣
fsr is crashing my game but dlss frame gen works good 110~ to 160fps
Are you on steam deck steamOS? 110-160 FPS?
@@GrownUpGamingGUG PC Nobara 40
@@_BartII_ 👍
I cant get my game to show up in protontricks ive ran it and everything its on heroic launcher too
Only this game or all games have issue when using protontricks on them?
@GrownUpGamingGUG just that one i figured it out for some reason it was reading my sd card not my ssd I took out my sd and it worked
@@oldmanprostte3574 great 👍
i got error when Run uninstaller -> Install -> select .exe file
it says Runtime error 216 at 00405CF
any idea how can i fix this?
It errors after you select the file or before? Maybe try redownloading the mod exe?
@@GrownUpGamingGUG I solved it by just installing the exe file from my desktop and copying it to my steamdeck
it works anyway
Great 👍
I'm having some Frame Gen ghosting issues, any ideas?
It does have a bit at the bottom of the car I noticed.
domo arigato sensei
You're welcome 🤗
i see some ghosting on the side of screen did you manage to remove it?
I didn't notice any ghosting.
heyy gug, i wanted to download mods for ac unity but i need a mod manager named anviltoolkit, when i try to make it as a non steam game it asks me to download a .Net windows thing, which i dont want to download. is there anyway i can bypass this? i apologize and thank you for your help you’re the best
If the mod manager requires .net framework dependencies then it won't work without it.
@@GrownUpGamingGUG can i use lutris or wine to run the mod?
It depends on the mod, read the installation instructions and whether it requires dependency.
Will it work with Palworld?
Yes I'm pretty sure it does 😁
@@GrownUpGamingGUG Thank you for making it clear.
Is this for every game or selective?
Thanks pal
Most games can be installed this way I think.
@@GrownUpGamingGUG if I get stuck.....I'll cry for ya lol
Is this mod working in Banishers: Ghosts of New Eden ?
Haven't tried yet, but I've tried that game with the paid mods 😂
@@GrownUpGamingGUG I tried & its work great, but need resolution 720 or will be artifcts with interface.
Oh cool 😎
Hmm. So i did the same thing but im getting bad ghosting of the car with driving and major input lag
Disable frame limit to avoid input lag. There's a little bit of ghosting at the bottom of the car that's unavoidable.
@@GrownUpGamingGUG Thank you! Always appreciate the help and your content
@@StarTrekBro thanks for supporting 👍
Would you happen to know if this would work for Red dead redemption 2?
If you have the non-steam version it should be fine. The steam version, if you change API from vulkan to dx12, the game crashes, I haven't found a way to make it work.
@@GrownUpGamingGUG Alright, that kinda sucks, thanks for the reply :)
@@lildragon64300 czcams.com/video/AqJa6TlPF_k/video.html here's the paid mod i installed before
The "dlss frame gen" button remains gray, but dlss can be enabled ((
Probably missed something. Maybe try again on a clean game install.
@@GrownUpGamingGUG I tried again and again, nothing worked. However, the mod from luke fz seems to work, I can turn on the Frame Gen, but if I turn on dlss, the game crashes. I have a pirated cyberpunk, maybe that's the case (although it works on a computer)?
@@user-ii5kd7xj2h it works. You should just install on a clean install game.
screen tearing after i install this mod, need to turn on vsync to fix it
On steam deck or Linux pc?
@@GrownUpGamingGUG steam deck
Oh, thanks for sharing 🙏
Im running Cyberpunk with the latest protonGE
Would that matter with the Launch Options Command?
it shouldn't but if it doesn't work then change proton.
not a steam version necessarily?
Works on both versions 😁
Do you have this mod for elden ring?
czcams.com/video/WGPYaE96-kQ/video.html yes but there's a catch
Is this available for every game man?
No the mod works with games that are dx12 and have dlss2/dlss3 natively.
Could you make a tutorial for a teknoparrot game. Called Jurassic Park: Raw Thrills, it would be appreciated.
Thanks for the request, I'll try, no promises 🙂
@@GrownUpGamingGUG Thanks
@@GrownUpGamingGUG Also, one more thing. The rom file is hard to find, it’s on internet archive.
Great job! 👏 wanted to ask a question, can I do this with Starfield on the steam deck?
You should be able to.
Hey there, just wanted to mention Starfield has FSR3 Frame Gen built in already, and gets good frame rates when turned on with the GPU Pinned to 1600 in the Steam Overlay. There is a little visual artefacting but Hope this helps.
@@chumbusthings it might. I might try it later. I didn't finish that game so I want to play it again.
@@GrownUpGamingGUG I’ve got 160 hours on the Steam Deck, fantastic game but it‘s definitely a slow burner. I’d recommend trying it again, lots of new updates since launch and lots more coming
@@chumbusthings I don't know why the cyberpunk theme just feels so unrealistic to me but fighting griffins with a silver sword is fine 😂
Doesn't work on Steam version 😢
Try this launch option:
WINEDLLOVERRIDES="version,dxgi=n,b" SteamDeck=0 %COMMAND%
This works for the steam version of horizon forbidden west.
@@GrownUpGamingGUG OK, thanks. But it still can't start. But I can start it after selecting the compatibility layer proton9-2.
Using this new launch option seems to be more stable, thanks
Glad it helped 😄
To much stutter here with frame generation.
Have an option to turn it on or off 😃
best settings on now??
It might be. There is little ghosting at the bottom of the screen, not really noticeable.
Is this for quacked only?
I think it works for both.
@@GrownUpGamingGUG thanks
Can you try this mod with GTA V?
GTA V is directx 11 so this mod won't work.
I see. What about RDR2? Can you try that please? Thank you!
czcams.com/video/AqJa6TlPF_k/video.html it only works on the non-steam version of rdr2 as the steam version of rdr2 will crash if you switch to dx12.
Thanks for the infos! One last question, will this mod work on RE4?
@@ejay2173 haven't tried re4.
zz
Didn't like it?
@@GrownUpGamingGUG i try 2077 i think it is not good to play for me
@@pkpkpkok I also couldn't get into this game. I tried it twice but just did a few missions and fell out.
Thanks!
No problem! 😁
Can this be used for Ark Survival Evolved and all its Mobs ?
Do you know if the game is dx12 and does it have native dlss2/dlss3 support? I'm not familiar with that game.
@@GrownUpGamingGUG I don’t have the information, I don’t know. It’s available on steam and it is supposed to be compatible with the steam deck. Im asking because I’m not knowledgeable when it comes to things like this.
Ok thanks for the request. I'll take a look when I'm free, no promises 😜
@@GrownUpGamingGUG much appreciated