Plastic Carburetor Cleaning on 450E Briggs & Stratton E-Series Engine on Bolens Lawn Mower
Vložit
- čas přidán 29. 06. 2024
- Mower hard to start? Sputters or difficult to keep running? How to remove and clean plastic carburetor on a Bolens lawn mower with a Briggs & Stratton 450E-Series engine. You'll find these on other makes like Craftsman, Poulan, Troy-bilt.
Complete gasket kit: amzn.to/3zaSCYC
Replacement air filter: amzn.to/2SdQlLq
Here's some tip cleaners amzn.to/3ppKa39
Complete replacement carburetor (in this video-no choke spring): amzn.to/3x2d8sl
Replacement carb (not shown in video) with the choke return spring: amzn.to/3ishrcB
Skip ahead or go back to review:
00:00 I'm not The Dan Band
01:15 carburettor removal
05:45 clean carb exterior
08:10 clean internal jets and parts
12:37 carburettor re-assembly
15:12 re-attach carb to engine intake
17:16 carb air box and filter re-assembly
The tools I like and use most often:
Magnetic spark plug socket set: amzn.to/3CzmpvO
Tachometer: amzn.to/3sHibiH
Vessel Megadora JIS screwdriver set: amzn.to/363RFqO
Channellock Bent Needle-nose pliers: amzn.to/3I5DbnA
Long 1/4 Quick-connect Torx Driver Bits: amzn.to/3HUNgnm
Spark Tester: amzn.to/3CxW2qi
OTC Leak-down Test Kit: amzn.to/3CyUhJn
Compression Tester: amzn.to/3IWd6sp
Wear your safety glasses, or you'll put your eye out. Try on some gloves. Take off that spark plug boot. Clean your room. Open the windows, those fumes are nasty. Just 'cause I do it, don't think it's the end all, be all solution. There's plenty more ideas out there, I can't take responsibility if you slice off a few fingers after watching my videos. And don't just pour that toxic stuff down the sewer or in the ditch, dispose of waste responsibly. Just be safe, OK?
Follow along with me elsewhere:
/ thelawnmowerlady
the-lawnmower-lady.blogspot.com/
Titles, opening graphics, and music by AbleVFX.
Any links to products are likely affiliate links, and I may earn a small commission from qualifying purchases (Thank You!), with no additional costs to you.
Disclaimer: The content of this video is purely for my entertainment, and is available to you for informational and educational purposes only. It's not substitute advice from small engine mechanics with professional training and certifications, nor does it create any kind of relationship between the The Lawnmower Lady and you. Your situation may be different, and the The Lawnmower Lady makes no warranties, express or implied, as to the fit, accuracy, or applicability of the information shown in this video, and implies no guarantee of results. The Lawnmower Lady and any sponsors of this video are not liable for any damages of personal injury, property damage or loss of any kind that may result from the use or reliance on this video and/or any parts and procedures represented in this video. You are using the information presented in this video solely at your own risk.
#lawnmower #smallenginerepair #Bolens #carburetor #briggsandstratton #450E #DIY - Jak na to + styl
If this video helped you, please consider clicking on the THANKS button above 🙌
Check out some more repairs on Briggs & Stratton E-Series engines just like this one: czcams.com/play/PLscwXOlCLzlyjkXser6A6cEbKe0CLP117.html
I was given a brand new lawnmower that was 3 years old and only ran once, couldn't get it to crank because of old gas, followed your instructions, literally took me 15 minutes from start to finish and it cranks every pull on the first try. 👍🏻🙏👍🏻🙏👍🏻🙏❤️🙏
@@greauxdevil9270 You comment is music to my ears! Glad I could help. Thanks for watching. Cheers!
High lawn mower lady, I am hoping you can help me. I am looking for what carburetor to buy for a Briggs and Stratton 190CC indeed CC professional professional series 600 Briggs and Stratton is no help And all my searching on the Internet does not does not help me find the correct carburetor to purchase. This is actually for a brute22" trimmer. The model number is BS1022H. Are you able to help me find the correct carburetor to purchase? Thank you very much
@@katkat1693 The model number of the trimmer won't help you. Find your engine model number: www.briggsandstratton.com/na/en_us/support/faqs/browse/engine-codes-model-numbers.html and plug that number into parts houses search engines to get your correct carburetor.
@@TheLawnmowerLady Thank you very much for that information and the website. Unfortunately I have looked all over this engine for some type of identifying number. I am unable to locate it Anywhere. I have torn this trimmer apart And tried to clean the carburetor Following your instructions. By the way they were very clear instructions and it was a great job in your video. I will try again To locate the model number. Unfortunately nobody at Briggs and Stratton Is available to get that information. Thank you again for your quick response and I will let you know What happens
You did a much better job than all the other "guys" who explained how to do this. Very thorough, thank you!
Wow, thanks! I appreciate you watching Mr Jason. Cheers!
Yeah except for cleaning the water out of the fuel tank
Exactly! And I could nvr find a video with the plastic carbs! Dad keeps letting my mower get rained on😒
Very nice work! Clear and concise. The only thing I would have done differently is drained the tank and started with fresh fuel, since there was so much water in the carb previously and you were not sure where it came from. I definite learned a couple of things from this video! Liked and subbed!
Thank you Mr. Eric for the sub and the suggestion. I did indeed drain the tank, but I figured the video was getting a little long.
I drill out the bottom main jet with a # 72 drill bit .025 works great , starts first pull ,,,,even the ones without the auto choke . Been working on mowers for over 50 years ,,,I'm a 74 year old machinist and I'm like you " Old School " !
I like to think of it as Old School Cool! I've not modded my lawnmower carbs yet, Thank you Mr. Barry for the tip!
Great video,, what is the white nipple sticking out the side of the carb,, nothing plugs in to it??
@@JoseGomez-yv5vt It's a plug covering up a passage in the carburettor not used on this particular model.
Hey @barryestell6324 is it just the middle bottom inlet that you drill to .025
By far, one of the best videos on how to clean these little plastic carbs. Followed it step by step. Lawnmower fired right up. Thank you.
Happy to help
I appreciate you watching!
Best carb video so far. You are clear and concise. I especially like the fact that you show the whole process without all the chatter and filler.
I'll definitely check your videos first. Great job.
Wow, thank you!
Thanks for the instructional video. Just picked up a Craftsman mower someone was throwing out. Cleaned the carburetor with your video direction and runs like a champ! Thanks again.
Glad it helped Mr. Jim! hope you subscribe and stick around. Cheers!
I’ve fixed a lot of things with CZcams videos, and yours is the best. No skipped steps, no dumb product placement, clear AF, and really good editing and production. I’m going to see if you have one on chainsaws after I mow my lawn
Thanks for your kind comments. Cheers!
Just wanted to say Thank You for ur videos! I've never had anyone to help teach me how to do repairs on my equipment before so when I came across ur videos, it was a tremendous help! You have the best details and information, where other videos just rush thru... I was successfully able to do the repair I needed to get little mower going again!
Thanks a bunch! Hope u stay blessed and happy!
Happy to help. I appreciate you watching. Cheers!
Thanks a bunch, ma'am! My mower is back up and running, saving me both the diagnostic fee and the labor, which was going to be more than my mower was even worth at this point. You're amazing, and the instructions were clear enough my child could have done this. Really appreciate it!
I'm so happy to help. I appreciate you watching. Cheers!
Thank you so much for this video!! First time working on this type of carb. Your delivery on instructions is clear and precise. I was able to repair my son’s lawnmower.
Glad it was helpful!
It would be nice to hear it running after you were done fixing it. Other than that you did one heck of a good job of explaining how to clean that carburetor. Keep up the good work and I'll keep watching. Thank you and God bless.
I appreciate that. I thought that video was getting on the long side, and chose to edit that. Many other viewers said the same thing. Most all my newer vids include start ups. Thanks for watching. Cheers!
You just gave me two answers to a problem I had with this carb ! Bless you !!! Henry sent me . 👍
Thanks Bill, glad I could help. Hope you stick around!
Thank you so much! I have never taken my carburetor out before but following your video I did that and discovered lots of water in my gas so I emptied out all the gas and put it all back together as you showed and voila, it started up first try. You saved me a lot of money and boosted my self confidence so much!!!
Yay! Your comments are music to my ears. So happy to help. Cheers Ms Iana!
Water contamination is the number 1 culprit I see that plagues all small engines. The ethanol fuel draws in moisture. Every mower I service, I completely drain all fuel from the tank and carb and leave it out in the sun or dry it bone dry with paper towels. Some models require taking things apart to get out any trapped water. Just a few drops of water can act like a check valve and prevent the gas from getting picked up.
I would like to take a moment to thank you so much for your how to step by step video. It was Christmas Eve 2022 and our lawn mower began losing power and stalling on sloping surfaces ran fine on even ground. I disambled the carbureator and found it full of water also found the breather hose not connected to the air filter. After performing all the steps in this video our lawn mower is back up and running and no longer losing power or stalling when mowing on a gradient/slope. Your video has saved us time, money and a whole of stress as we were about to give up and send mower for repair. Thanks agin so much!!!!!!
Glad to help! Cheers!
I watched half a dozen of these videos on this carburetor cleaning, and this one was a stand out. She walks you through the relatively easy (once she shows how) method to remove the linkages from the unit (I messed it up the first time I tried doing the clean). Further she did another breakdown of the nylon stack which no other video showed and all I can say after doing this, was able to finally get my lawnmower to run. Don't waste your time on the other videos; start and end with this one. Nicely done "Lawnmower Lady"!
Thank you! I appreciate that. Cheers!
Just discovered your videos here in UK. Found to be very informative simple and clear and concise. Thank you
Glad you like them Mr Richard! Cheers!
Wow! Even my favorite small engine repair channel did not show that you could separate the atomizer out to clean it. Glad I stumbled across your video.
Glad I could help. Thanks for watching. Cheers!
Thanks for the detailed directions on the rebuild. I spent all day trying to put this thing back together. I watched your video and you mentioned the white ring inside and that’s what was off on mine.
Glad I could help. Vey easy to miss that. Cheers!
Thankyou.. been working on small engines for 40yrs and I just couldn't figure out this plastic carb.. you made it easy to figure out how to clean it and now it works like new again! You ROCK!
Glad it helped. As much hate as there is out there for these carbs, they really are pretty simple. They are more prone to getting clogged up with debris that gets sucked into the carb throat. I appreciate you watching. Cheers!
Your video helped me so much, thank you! I’ve used a lawn mower but never fixed one until today.
So glad I could help. I appreciate you watching. Cheers!
Thank you soooo much!!
I doubted that this would be my issue because I maintain my power equipment the best I can but I guess I still have a lot to learn. I took your advice and removed the carb…cleaned it out but didn’t find anything substantially wrong (no dirt that I could see and no water), reassembled and BAM….IT’S ALIVE!!!
Glad I could help!
wow, i can't believe it worked for you. I just did the EXACT same thing and my piece of shit will not start. this is the third time ive tried. fuck this mower
Wow! Fantastic video. I tried to repair my Briggs & Stratton pressure washer engine with no help or video. I did most of what she said (it turns out) BUT, I learned three critical things from this vid that I never would have found on my own. Great advice, great quality video, very clear and VERY Helpful. Started the machine on the first pull and it runs like a dream, after sitting dead for two years. Thank you, Lawnmower Lady!
Glad to help. Thanks for watching!
Thankyou maam your the first person I ve seen on the internet clean a plastic carb correctly I m a small engine mechanic in N.C they never take the main jet apart thankyou again for showing the proper way
You are most welcome. I appreciate you watching!
Replaced the entire filter box & primer assembly & it started up ran for about 30 sec & cut off. Definitely thankful for your disassembly vid of this carb cause I suspect water is trapped in carb preventing fuel from reaching combustion chamber. Great vid. Thanks a bunch.
Glad to help. Thanks for watching. Cheers!
You always make a great video! I just did one of these carbs today on a craftsman pressure washer. I also use a guitar string, works perfect on idle jets!
Right on Mr Wicked ! Thanks for watching. Cheers!
thank you for the breakdown on the plastic carbs lawnmower lady. it was the atomizer dissasembly that solved my riddle. you rock.
Thanks Mr Mike! Glad I could help. Cheers!
Excellent DIY video. Thanks a million, dear lady.
Thank you! 😊
Wow. You're a phenomenal instructor. Subscribed!
Thanks and welcome. Cheers!
Thank you, Lawnmower Lady! Every year, it's the same thing - my lawnmower won't start, so I pull out the carburetor, clean it out, then it starts right up. This year, I repeated the process, but it wouldn't start. I was scratching my head and after enough wasted time, I pretty much decided I was going to go buy a battery-powered lawnmower after work, that is, until your video popped up in my feed. I saw the problem at 8:00, the white donut ring had popped out of my carburetor when I had removed it from the lawnmower. I had no idea it had gone missing (and didn't even know to look for it as everything looked ok inside there once I popped the fuel stack back in). I went back out to the garage and found it camouflaged with lots of junk on the floor, put it back in, and the lawnmower started right up! Thank you for your detailed instructions, just enough info to get right to it and point out all of the important parts, but not too much like some others can do. I especially appreciate that you showed how to pull the carb off of the lawnmower (I had figured that out on my own previously, but it helps to see the whole process - and...pulling off the cover is super simple and makes removing the carb easier) - other folks just start their videos after they've pulled the carb out. Looks like the ole' gas-powered lawnmower will survive another summer.
Thanks! Your comments are music to my ears. I'm so glad I could help. Some of those have a black donut ring collar,, and those are nearly impossible to find in the dark recesses of the garage. Cheers!
I cleaned my carb with no success, now I'm going to look around my garage for a donut ring LoL
Madam, thank you very much. With the help of this video, I just removed and cleaned the carburetor on my 450E for the first time ever.
Yay! Happy to help. Cheers!
I've watch several videos and yours is by far the best. Thanks my lady!
Yay! Thank you!
This is the most detailed video that I have found on this subject. Now I know where that large black O ring came from that fell out when I pulled the carb off. And i didn't know that the white hard plastic O ring snaps in on top of it. Thanks.
Thanks for watching Mr Gary! I'm happy my video helped you. Cheers!
Me too! Found an o ring had no idea where it fell from. White plastic ring was still inside the carburetor. Thank you so much!
First time I’ve seen inside the plastic carb. Very simplistic. Thanks
Glad to help. Cheers!
Thank you so much. I figured there was water in there but wasn't sure how to get the whole thing apart. Sure enough, a small swimming pool of water. Drained, cleaned up, and viola ... started up on the first pull!
Glad to help. Thanks for watching. Cheers!
Best job I’ve seen for this model by far, keep up that Excelent work.
I appreciate you watching!
Great video as always! Engines with the plastic carb has a tendency to surge due to the small jet. According to Briggs they run very lean due to emission regulations in different states. They surge a lot here in Europe too. A tip here for all if your carb is clean and it still surges - is to upgrade to a bigger jet - Briggs part no 596524. That often fixes the problem. Personally I prefer to old carbs where you could adjust the mixture. :) Cheers!
Great tip Mr. Anders! Thanks again for watching :)
just think abt this for a minute.. briggs uses the same exact carb , with same exact jets, throat size, ect for 4.5. 5. 5. 5 , 5.75 hp mowers... how are they achieving this wide difference in hp, with the same carb? I dont think they are., I think its a scam. most of the new generation has never used a real 5 hp engine so they dont realize the difference.. they jets are way too small to pass enough fuel for the hp they claim., also the throat of the carb is restricted by a plastic ring .. why did they do this? I think its to restrict air. the engine operates under vacuum, and can only pull so much fuel out of the jets under a specific vacuum and volume.
another problem with the plastic carb design is the 90 degree bend in the white jet chamber.
anytime a fluid or vapor has to make a 90 degree turn, it causes resistance by a factor of 5.
example.. if you put a 90 degree fitting in a garden hose, it is equal to 5 extra feet of hose that the water has to travel thru..
its amazing that these mowers run at All.
Interesting & thanks for the part number. Mine's what I call 'hunting' quite badly.. think that's the same thing as 'surging'.. Might give the different jet a go if cleaning the plug doesn't help. EDIT nice one - you set me on the right path to getting it sorted, using the old original jet (totally blocked, but once cleaned, turned out to be way bigger than the jet that came with the replacement carb I ordered off Ebay)
If jets are not available, you can use a .020" pin vise or drill bit, whatever you like to call it & drill the jet out. I have had a 100% success rate so far.
@@jackwarren3882 A video by Steve's Small Engine Saloon also mentions drilling out the jet to prevent it from clogging again. I noticed the "High Speed Steel Micro Drill Bit Set, 30 Piece" for $3 from Harbor Frieght has a bit this size. It's .5mm (same as .020").
But I'm wondering instead if just installing a fuel filter will also prevent it?
Great video, I'm a 2 stroke mechanic, and of course my own equipment is a mess! First time encountering a plastic carb so needed help with my mower!
Glad to help! Thanks for watching. Cheers!
Excellent job showing every step necessary.
I appreciate you watching. Cheers!
Awsome job there, I look forward to more of your videos
More to come!
What a fantastic video!!! Great job taking your time and explaining everything thoroughly and speeding up the non-educational pieces.
Glad it was helpful!
Super helpful, thank you! Engine now working beautifully!
Glad it helped!
Great Video ! If I may, blow off the carb. / air cleaner backing and cover with compressed air, this removes 80% of the crud. . then use a longer, soft bristle detail brush with your cleaner. The longer bristles work down in the small areas. I live in Indiana, water is definitely a problem, mostly because folk s believe their 2 car garage is made to store old sewing machines, tread mills and endless non labeled boxes, while leaving the car's and mower outside ! Thank you for the video !
Thanks Mr. Toon for watching. Hope you subscribe and stick around!
Thanks to you, I JUST FIXED MY MOWER. THANK YOU
Yay! I appreciate you watching. Cheers!
This is a good video showing some details about the tier 4 jetting and the prime and start Briggs. My buddy gave me a 2015 ready start version of the 550EX that uses paper element, but can probably be converted to foam by removing one linkage. Thanks!
I appreciate you watching. cheers!
Excellent video, you went step by step on each rubber gasket. Thank you very much. 🥰🥰🥰
I appreciate you watching. Cheers!
my dear, best video on carb clean on you tube, sooo concise.
Thank you Mr Greg! I appreciate you watching. Cheers!
This video was very helpful and helped me get my two lawnmowers back started
Happy to help.
This is the best video on cleaning the plastic carb, the only thing I would do is I would drain the tank because of how much water was in the carb. Please keep doing these videos.
Thank you Mr zoomboy for watching! I did indeed drain it, but edited it out as the video was getting a bit long. Cheers!
I’m so glad I stumbled across this. It was extremely helpful !
Glad it was helpful! Thanks for watching.
Nice job on the video and I think. What made it so good? It was the fact that you explained things before you did them, And then fast forward anytime you torqued down attachment points. It's the first time i've seen one of these plastic carburetors disassembled in all of your special attention to detail and cautionary explanations were extremely valuable. Again really nice job!
Awesome! Thank you!
You did great!! Thank you for making this video for all of us to see you do this task.
You are so welcome!
Awesome, very easy to follow, video. I followed the video and my non cranking Troy Bilt pressure washer cranked on the first pull and purred like a kitten. 👍👏😃
Great to hear!
Thank you for your video, It worked first pull after this videos repair! Avoided spending 600 on a new "modern" electric mower
Glad it helped. Cheers!
I am working on right a carb and this was very helpful to me. Thanks
Glad it helped
ms LLL - i enjoy watching you disassemble & clean plastic carbs so much, that i've ordered a plastic carb so i can kinda follow along. i'm a manual, rather than visual, learner. this purchase will be difficult to justify, as i don't own a lawn mower. take care. - regards, dLL
Right on!
Nicely done and very well explained! 🛠️👍
Thank you Mr. Don. Glad you liked it!
Awesome video, explained well, precise, and very helpful one of the best vids on youtube big ups to you.
I appreciate you watching. Cheers!
Very good video with plenty of handy tips,thank you very much. A true professional.Keep well.
So nice of you to say that Mr Frank. Thank you for watching. Cheers!
Very good video. Well done and right to the point. Thank you.
Glad it was helpful Mr. William!
Great video! Thank you for explaining everything the way you do. You're a great teacher!
Glad it was helpful! Cheers!
Thank you so much for your excellent tutorial ,all sorted running like a good one,all the best from the U.K.
You're welcome!
Excellent tutorial! Thank you.
Great video, I’m having issues with my mower surging and I think I have to clean it so this video helped me out some on how to take them apart. I am not mechanically inclined in the least but I have to do something about the surging because it’s extremely annoying lol. Anyways thanks for the video and wish me luck that I don’t mess the mower up even more
Take your time, and take pictures to help you reassemble. You’ll be fine. Check that air filter is clean too. Thanks for watching.
@@myvicariouslife4012 Glad you got it fixed. Hopefully next time it won't be so blazing hot. Cheers!
Wow - you were born to teach, thank you so much
My pleasure!
I just came down here to thank you for making and posting this video. I was researching my carburetor issue on my mower when I found iy. Now that I liked and subscribed, I have only one question left to ask: can you adopt me? You are the coolest grandma ever. I wish, I’d had somebody like you in my life growing up. I bet, I could pick up a lot just watching you loitering around your workbench. Thank you again!
Awww. That's so nice of you. Thanks for watching. Cheers!
Thanks for making this video it's very helpful
Great video. Now you've helped getting a lawn mowed in Ireland!
Happy to help. Cheers! Or I guess I should say Sláinte!
Köszönöm a precíz bemutatást! Dadogva járás után leállt; gondoltam kipucolom a karburátort, de ilyet még nem szedtem szét . . . Szerencse, hogy rátaláltam - bár majd' az összes szerszámom megvan hozzá - biztosan eltartott volna fél napig amire megcsinálom! Külön köszönet a viszonylag (kis műszaki tudással!) "érthető", MAGYARRA állítható automatikus fordítást ;-) Viszem a szervizbe . . .!
Köszönöm, hogy megnézted a videómat. Remélem, ezzel időt és pénzt takaríthat meg. Egészségére!
Hot Damn Thank You Ma'am 😁
I really appreciate how you showed the process, from start to finish.
Maybe in my younger days, Just Do It videos would been fine, but now, with Pugalustica Dementia, I like slower, well explained videos when it comes to taking anything apart!!
Thank You Much Ma'am
Subscribed From Iowa 😊
I appreciate you watching. Cheers!
So far you the best one I found on here youre brilliant
I appreciate you watching. Cheers!
Thank you so much for your help! Just about have the carburetor out; will finish the rest in the a.m.
Fantastic!
@@TheLawnmowerLady It is fantastic 4sure...thanks to you!
Thank you for making this video, it was a huge help for me!
Glad to help. Cheers!
Very good video stella lots of step by step information keep up the good work
More confident when I have one to do from just watching your CZcams video
Glad it was helpful Mr Vince! I appreciate you watching. Cheers!
This person will go to CZcams heaven for this in-depth video
I hope so! LOL. I appreciate you watching!
thank you so much, exactly what I needed ! Cheers from France!
Great to hear. Cheers! or I guess I should say Votre santé!
Thank you this was the best video for this repair I have seen 👍👍👍
Wow, thanks!
Thanks, just repaired and works like a charm.
Nice work Mr John ! I'm glad to help. Cheers!
Wonderful instructional video. Great job!
Thanks for watching!
You da man,,Sorry Woman,,,this is one of the best videos i have seen,so easy to watch and understand how to clean the carby,,,,,you go girly,and thx heaps for the help
I appreciate that! Cheers!
@@TheLawnmowerLady yaaaaa,,,cleaned the carby with eas and full of confridence,thx to you the lawnmowerLady..starts 1st pull ,never ran so good,,,,thankyou,,,,,,you de-woman,,cheers take care
Great video, I didn't know the plastic carburetor could be serviced. Thanks
Glad to help. Cheers!
Loved video. Learnt how to be brave and disasemble main jet!
You can do it! Cheers Mr Tony!
Excellent!!!! I have a lawn mower that needs to be turned up and you answered all of my questions. Great video.
Glad I could help! Cheers!
Watched this video and it covered a big gap in how to….! Thanks
Happy to help!
Thank you! This is exactly what I needed!!
You're so welcome!
Merci pour ce tuto complet et précis 👍👏 ça va m'aider à réparer ma tondeuse
je suis heureux d'aider. je vous remercie de regarder ma vidéo.
Great video. I do these alot. One thing I do that I didn't see you do was check for water in the gas tank. I just always take the tank off and clean it out. Clean carb, clean tank. Just a thought for you. Thank you
Thanks for watching.
tks you saved my life, tks for sharing knowledge, experience and helpful videos!!!
Glad to hear that!
Thank you so much. My lawnmower its back again. 😊😊☺️☺️
Wonderful! I'm glad I could help you. Cheers!
Wonderful video, the best ,very informative and helped me a lot. Thank you,
I'm happy to help. Thanks for watching. Cheers!
I learned something. Good job.
I do appreciate you watching. Cheers!
Thank's fixed my problem, greetings from Germany.
Glad it helped. Thanks for watching. Cheers! or I guess I should say Prost!
Great job!👍 very informative 👏 👌 👍
Glad it was helpful!
I hate to say it, I saw a woman, and thought, oh no here we go. But you completely made me have to rethink my attitude. Your very thorough and clear. ❤️ thank you for a great video.
Thank you Mr. John. You comment makes me smile! I hope you stick around.
Here is an idea that helped me. I added an inline round disc fuel filter between the tank and carb. The type with the 150 micron metal mesh in it. Doing that has helped prevent the clogged carb jet issue. These are great mower engines.
Good idea.
Thank you.
Really useful video. Thank you.
I appreciate you watching. Cheers!
LOL…going through your back catalog. This thing with all the different men’s shirts is a real hoot!
I really appreciate you watching my channel!
very clear instructions thankyou :).
Happy to help!
Thank you so much! You saved me alot of money.
So glad to hear that. Thanks for watching. Cheers!
Appreciate the video!
Glad it was helpful!