With these Tweaks you can boost your AMD Ryzen 5 5600G upto 4.6Ghz even on a stock cooler, Few things you can apply/try for max performance; 1. You can try PBO scalar options, if your boost clock is dropping frequently (helpful with stock cooler) 2. RAM OC and Tighter Timings are very helpful in pushing max frames specially with the Radeon Vega iGPU. 3. If you are using only iGPU, allocating Fixed amount of VRAM helps those 1% lows. I hope you liked this vid, go try these settings out on your 5600G :)
From the bottom of my heart, I love you, just built my new pc with rx 6700xt and r5 5600 and this was very helpful. Want to see how far the 5600 can be pushed and ram overclocking videos next.❤
I really like people who say: I overclocked the processor, memory and video core and nothing has changed, don’t overclock! (at the same time they leave the built-in video card with 512 megabytes)
if it's an AMD APU, leaving like this is no problem, bcause they have a "tecnology" that auto-alocates vram according to the remaining ram available. it's a mobo feature for amd supported mother boards, so your windows task manager continues to show you that your igpu only have 512mb, but its not like that
well... it's probably a physical problem.. check if you removed the protection plastic off of your cooler, verify the thermal paste as well (ryzen processors usually has pre-applied thermal paste, but idk, sometimes things just go wrong, try replacing it, thermal paste is usually cheap as you don't need the best for this processor).. also this cpu has a low TDP, its normal average operation temperature would not reach 65 degrees (Celsius ºC), there's something wrong with your cooler, for sure. if it didn't work.. try a technician, or do an undervolt on the cpu cores like its shown in the video, undervolt and raise the frequency to compensate it, lower temperatures with the same or higher overall performance
@@chickenmcnugget005 on low TDP processors, not really. I use a r5 5600g overclocked with the stock cooler and it has never reached more than 70°C, just don't push things too much, if you're in doubt, just google how to safely overclock your processor, I'm sure theres plenty of tutorials out there for your needs
If I'm correct, you undervolt the cpu then overclock the igpu right? You also need to tell that you need to test a lot for stability and i stability issues for this to work in the long run. Also not all values in pbo will apply to all 5600g because of silicon lottery.
correct, and m using these settings for more then 3 months now i have done a lot of stability testing. the PBO+CO values are solid stable but yes there is a little bit of luck involved if someone wants to copy 100% of the value.
@@IneffableBenchmarks i tried to undervolt my cpu but i can't get it to work on high negative values. The result is not that great for me so I just stick with stock. But I guess you have a better 5600g than mine.
@@IneffableBenchmarks why does whenever I enable pbo on my asus prime b450m a-ii mobo it doesn't change anything from auto? I test with cinebenchr23 btw.
Is it normal that after igpu OC the gpu clock always stays on 2300mhz, even on desktop when there is no load. When there is no OC set, the clock goes down to 400mhz after couple of seconds with no load. Is there any fix for that, and is it bad for the gpu?
I have a similar problem It repeatedly chrashes extremely frequently I think there may be an issue with the drivers Use stock settings until the next driver
i tried the exact same settings then stress tested it using heaven benchmark the cpu speed can only reach max 4100mhz while the gpu speed cant be shown and the temp is reaching 90°.any solutions?
Use a real benchmark not heaven something like prime95 and reset all of your bios settings and check temps. Apart from that check that your cooler is mounted correctly and check if the fan spins. Check your bios and the temps at idle, if they're above 50 something's wrong unless you live in a really hot environment.
I am facing crash in my pc after using all of your settings,i tried these settings so many times but pc shutdowns as soon as it boots to lock screen. My motherboard is MSI B550 Gaming Edge WiFi.Please help bro
The CPU overclocking thing also works on the Ryzen 5 5600 (the one without iGPU) and thanks to you, my boost clock is now 4.6GHz. (It was 4.4GHz before OC) My system is currently working completely fine but the more you overclock, the higher the CPU's temp. However, I have one question: Is it possible to OC from 4.4GHz to 4.9GHz instead of 4.6GHz?
yup, i recently got my hands on the ryzen 5600 non-x version and i am currently working on OCing it to it limits.i have managed to get around 4.8Ghz all core on 5600, but i like to test it further for stability before i release any guide for it.
Any problem to now overclock the processor and add on gpu later on it like 7-8 months later add a gpu Will overclocking the processor cause any problems with the GPU?
Do you have any reasons for why my 5600g constantly has driver timeouts when playing games or just turning on? It literally kicks me out of games so I can’t even play
Damn man! The only vid that worked for me to overclock it! I got an RTX 3070 and the 5600G and now it is not limited anymore on 4.2. It gets to 4.6 GHZ and its great! Works much better! I have an 850 wats power supply! Is it any other Overclock I can do to get a little extra fps without doing anything wrong? I have 32 gb of ram at 3066HZ. Please let me know if there is any other better and stable!!
Частоту оперативки бы побольше, либо ты опечатался указав 3066. Сейчас условный минимум это 3200, но 3600 или даже 4200 будут гораздо лучше работать. У красных камней есть некая привязка частоты ядер и частоты оперативки - есть в сети инструкции и даже программы рассчёта для этого А вот блок питания у тебя даже избыточен для этой системы, но главное, что его достаточно с запасом
Bro now my pc is restarting automatically randomly. I did the same steps in the video as you said so what should I do? (Note : sometimes auto restarts while in game and also sometimes it doesen't@@IneffableBenchmarks
@@IneffableBenchmarksalso the performance did significantly increase after your OC guide in this vid and it had no issues like crashes or anything else while stress testing it (I used CINEBENCH R23)
@@iemstanmayabehera645 I think I'm better off just replacing it with the non x variant and add a a380 or something like that since they come pretty cheap So I think I'll just start saving for that Still 70° seems quite a lot Won't it affect the lifetime of the CPU?
Not sure but most of the people suggest that you can overclock until the temp reaches 70,its your call man. Your cpu, your pc, now I just applied this video's bios settings and my god of war 3 performance increased by almost 10fps.i have a r5 5600g, 16gb ddr4 ram, rtx 2060s ,500gb nvme m.2 ssd, toshiba 2tb hdd
i really like this overclocking, been using it for months. recently bought a better cooler, even at 100% cpu utilization it stays at 60 to 70*celcius. do you have plans on making a new vid for those who want stronger overlock?
Leaving this incase if i forgot the date 20-4-2024 I overclocked as per video And still the evening after doing the mess My pc is running don't know how long it will not show any problems And I don't feel any major performance change it is same ya for now temperature is controlled or stable but don't know about future anyway it was fun experience Let's see what will happen
@@IneffableBenchmarks ya but it doesn't have any big difference just the completion became first but It was good bcz i didn't touch volt settings so it's ok But I didn't understand the fps u get and I get are very different my fps are unstable up and down not a constant range it can go to 30 to 100 And one more thing I don't know if this problem with me or anybody else My fps comes more in medium if i play on all low 720p then fps are unstable but if i play in low medium 720p or 900p low medium it runs smooth and High fps like yours So pls reply
on gfx voltage 2:00 when i type 1300 and then press enter. it automatically converts to 0.00625V. is that normal? fir now i set it to auto since i'm not sure
Bro after applying your oc my cpu temps is around 85-90 degrees and cpu does not reach over 4Ghz and sometimes my pc restarts randomly. How do I fix this ?
with my settings if the cpu load increase and the temp reaches above 70C, you will notice that freq will start droping from 4.6Ghz, with any after market cooler that's not the case.
Tried it out with deepcool ak400 and it works! 42C standby and 60c under load ( using dedicated GPU ) If ever I wanna try adding 50mhz more so that it will be 4.7 is it fine with the curve settings you used? @@IneffableBenchmarks
probably a problem with your mother board battery. unplug it, clean the contacts and plug it again, then try to save the settings.. if the battery is not well-plugged, the mobo cant save the setrings. thats why removing the batery for a few seconds resets the bios
If i aint wrong u need 8cores 16threads for valorant multithreading. Maybe check ur bios if it does have multithreading support or check if ur device is actually using all cores. Im pretty much a novice on this topic but im sure ryzen 5 5600g has only 6 cores 12threads thats why the option aint there
usually what damagea your cpu is the temperature, if you manage to keep it under idk.. 70 degrees Celsius, everything is ok. but you need to see if it will be stable as well, high overclocks usually get you some blue screens or random crashes
I have 3 options 1. 4,65Ghz (min 4,6ghz) 1,32V, 4133 cl 18 1,4V, 2300 1,275V 82⁰C cpu full load almost 65W igpu max 60⁰C. 2. 4,5Ghz (min 4,47 ghz) 1,28V, 4000 cl 17 1,38V, 2300 1,25V 72⁰C 59W cpu, 50⁰ gpu 3. 4,45Ghz (min 4,375ghz) 1,25v, 3800 cl 17 tras 36 1,35v, 2300 1,1v 55⁰c max cpu with only 55W gpu 38⁰c Test bed 5600g, apacer nox 3600, b450 pro r.2.0 deepcool Ag400. Type negative, gpu + 200 (all setup fclk, mclk 1:1) manual. Tested game uncharted, GOW, rspcx3 gow3, With Ryzen 5700g i can push into 4,7Ghz 4200mhz cl 19 tras 42 note only these can b done with cheaper apacer nox.
@@user-yn4ep9tl5s 12gb ram is still plenty for multitasking unless you really need a lot of apps open in the background or your applications eat a lot of ram.
Please bro make a video about msi motherboard, i tried your settings so many times but it occurrs blue screen. Please help bro. My motherboard is MSI b550 gaming edge WiFi
Good but I think u need to try games like Red dead redemption 2 , Shadow of the tomb raider, Assassin's Creed Valhalla and more games like this not eSports because it depends on CPU and we know that's a perfect one
Bro I'm gonna to build a pc right now I'm gonna with ryzen 5 5600g but in future I'm gonna to buy rtx 4060 can you tell me how mutch fps i got in Very high settings in mordern games and also old gams please tell me❤
With these Tweaks you can boost your AMD Ryzen 5 5600G upto 4.6Ghz even on a stock cooler,
Few things you can apply/try for max performance;
1. You can try PBO scalar options, if your boost clock is dropping frequently (helpful with stock cooler)
2. RAM OC and Tighter Timings are very helpful in pushing max frames specially with the Radeon Vega iGPU.
3. If you are using only iGPU, allocating Fixed amount of VRAM helps those 1% lows.
I hope you liked this vid, go try these settings out on your 5600G :)
PBO Scalar Best settings ???
Does your settings work on 4650G?
@@LuckyYeti Don't know
@@LuckyYeti mine is Ryzen 5 5600g
hey how much should i set pbo scalar for stock cooler bro? please reply
From the bottom of my heart, I love you, just built my new pc with rx 6700xt and r5 5600 and this was very helpful. Want to see how far the 5600 can be pushed and ram overclocking videos next.❤
Glad I could help!
i am currently testing 5600 and 5600x might release a BIOS optimize guide
@@IneffableBenchmarks im using 5600x now, can make a video with that processor? thank u so much!
I really like people who say: I overclocked the processor, memory and video core and nothing has changed, don’t overclock! (at the same time they leave the built-in video card with 512 megabytes)
if it's an AMD APU, leaving like this is no problem, bcause they have a "tecnology" that auto-alocates vram according to the remaining ram available. it's a mobo feature for amd supported mother boards, so your windows task manager continues to show you that your igpu only have 512mb, but its not like that
Dear, thank you so much for that help. 1+ Subscribed. You are AWESOME! My Onboard 5600G are flying right now and very fluid.
really helpful vid
❤
Best guide special thanks❤
i am using the ryzen 5 5600gt with integrated graphics and cpu temp goes up to 80`C on stock settings while playing gta 5 what should i do?
well... it's probably a physical problem.. check if you removed the protection plastic off of your cooler, verify the thermal paste as well (ryzen processors usually has pre-applied thermal paste, but idk, sometimes things just go wrong, try replacing it, thermal paste is usually cheap as you don't need the best for this processor).. also this cpu has a low TDP, its normal average operation temperature would not reach 65 degrees (Celsius ºC), there's something wrong with your cooler, for sure.
if it didn't work.. try a technician, or do an undervolt on the cpu cores like its shown in the video, undervolt and raise the frequency to compensate it, lower temperatures with the same or higher overall performance
@@marvin3942 do you need a good cpu cooler to overclock the processor?
@@chickenmcnugget005 on low TDP processors, not really. I use a r5 5600g overclocked with the stock cooler and it has never reached more than 70°C, just don't push things too much, if you're in doubt, just google how to safely overclock your processor, I'm sure theres plenty of tutorials out there for your needs
Iam using r5 5600g and rtx 2060 i disabled i gpu and want to oc only cpu and this is possible but is it good if i have good cou coller can i oc ?
Bro in my advanced section amd ovecloking not showing i have same motherboar
I can't find
the UMA Buffer on the B450M-HDV R.4 anywhere on the advance settings, any idea?
what did you do in gfx curve optimize? 1:34 was it just a miclick, and should it stay disabled?
It was disabled
It works thanks
awesome
Will this harm the PC?
Coloquei 4650 na core ratio, 1.35 na voltagem override e as config do video e ta ficando no max 55 de temp. Pode dar algum problema?
Can you help??? It’s not showing amd oc and my motherboard is updated to the newest one
If I'm correct, you undervolt the cpu then overclock the igpu right? You also need to tell that you need to test a lot for stability and i stability issues for this to work in the long run. Also not all values in pbo will apply to all 5600g because of silicon lottery.
correct, and m using these settings for more then 3 months now i have done a lot of stability testing. the PBO+CO values are solid stable but yes there is a little bit of luck involved if someone wants to copy 100% of the value.
@@IneffableBenchmarks i tried to undervolt my cpu but i can't get it to work on high negative values. The result is not that great for me so I just stick with stock. But I guess you have a better 5600g than mine.
@@zilverman7820silicon luck man
@@zilverman7820my 5600G can work easily with negative 30 offset on all cores
@@IneffableBenchmarks why does whenever I enable pbo on my asus prime b450m a-ii mobo it doesn't change anything from auto? I test with cinebenchr23 btw.
Why does my r5 5600g with 3200hz 16gb ram only have 120ish fps on valo?
Your gpu is 512mb go to the bios and do it 4gb vram and u will see the change trust me ❤
What was your room temp and system case while testing this? Because 70 c overclocked on stock cooler is unbelievable 🤯
Thanks 😊
ur welcome,
Thanks bro 😎
Any time
overclocking is it reach amd 5600x speed or amd 5600 or low??
my manual igpu overclocking cannot saving the setting, how to fix it? :( . my mobo is gigabyte b550 ds3h
Same but my mobonis b450
Did you fix it?
how to do this on gigabyte aorus elite b550m?
Is it normal that after igpu OC the gpu clock always stays on 2300mhz, even on desktop when there is no load. When there is no OC set, the clock goes down to 400mhz after couple of seconds with no load. Is there any fix for that, and is it bad for the gpu?
ye its good
Why my base clock still 3.9
i tried this then after playing for a while it would randomly shutdown. My mobo is biostar b40mhp
I have a similar problem It repeatedly chrashes extremely frequently
I think there may be an issue with the drivers
Use stock settings until the next driver
Bro i just noticed ur msi burner showing 2300 and 1800
But my MSI Burner showing
400 and 1600mhz
it's good if it was constantly at 2300, you would kill the processor
I'm using b450 plus ii Asus motherboard and curve optimizer is not present in my bios then what should I do
update bios version to latest and then check
get f 13 from amd
i tried the exact same settings then stress tested it using heaven benchmark
the cpu speed can only reach max 4100mhz while the gpu speed cant be shown and the temp is reaching 90°.any solutions?
Use a real benchmark not heaven something like prime95 and reset all of your bios settings and check temps. Apart from that check that your cooler is mounted correctly and check if the fan spins. Check your bios and the temps at idle, if they're above 50 something's wrong unless you live in a really hot environment.
@@BLGDrive okay thanks
What was the Difference in Fan Noise before and After ?
Fan becomes Jet Engine and says I'm death now.
lol but not much cant hear it outside of the cabinet
sholud i leave the vcore volt to stock settings??
How come for me my bios doesn’t have the and overclock thing? How do I turn it in?
check if your cpu supports overclocking first.
I am facing crash in my pc after using all of your settings,i tried these settings so many times but pc shutdowns as soon as it boots to lock screen. My motherboard is MSI B550 Gaming Edge WiFi.Please help bro
And i guess i need to disable Global C -State Control to work as far as i know. Am I right bro ??
The CPU overclocking thing also works on the Ryzen 5 5600 (the one without iGPU) and thanks to you, my boost clock is now 4.6GHz. (It was 4.4GHz before OC) My system is currently working completely fine but the more you overclock, the higher the CPU's temp.
However, I have one question: Is it possible to OC from 4.4GHz to 4.9GHz instead of 4.6GHz?
yup, i recently got my hands on the ryzen 5600 non-x version and i am currently working on OCing it to it limits.i have managed to get around 4.8Ghz all core on 5600, but i like to test it further for stability before i release any guide for it.
Any problem to now overclock the processor and add on gpu later on it like 7-8 months later add a gpu Will overclocking the processor cause any problems with the GPU?
nope, will work fine
If I have a dedicated Gpu should I still change the settings that are for Igpu?
why
Legend
thank u
A question, how your GPU MEM CLK achieves 1800Mhz?
Do you have any reasons for why my 5600g constantly has driver timeouts when playing games or just turning on? It literally kicks me out of games so I can’t even play
There are few CZcams videos regarding this. Might help
Damn man! The only vid that worked for me to overclock it! I got an RTX 3070 and the 5600G and now it is not limited anymore on 4.2. It gets to 4.6 GHZ and its great! Works much better! I have an 850 wats power supply! Is it any other Overclock I can do to get a little extra fps without doing anything wrong? I have 32 gb of ram at 3066HZ. Please let me know if there is any other better and stable!!
Частоту оперативки бы побольше, либо ты опечатался указав 3066. Сейчас условный минимум это 3200, но 3600 или даже 4200 будут гораздо лучше работать. У красных камней есть некая привязка частоты ядер и частоты оперативки - есть в сети инструкции и даже программы рассчёта для этого
А вот блок питания у тебя даже избыточен для этой системы, но главное, что его достаточно с запасом
I did the same as you on a msi mobo. But I am not getting a boost in fps like yours. Why's it?
compare the cinebench or geekbench score, if it get a boost its alright, APU's performance will mainly get boost from high freq ram
Bro now my pc is restarting automatically randomly. I did the same steps in the video as you said so what should I do? (Note : sometimes auto restarts while in game and also sometimes it doesen't@@IneffableBenchmarks
@@IneffableBenchmarksalso the performance did significantly increase after your OC guide in this vid and it had no issues like crashes or anything else while stress testing it (I used CINEBENCH R23)
Bro, my motherboard does not have PBO... If I overclock the iGPU only and change VRAM will I still increase performance?
update bios
Damn..got stablity with the same values as yours
With stock cooler idles around 41°c
Bro you can overclock your cpu as you want until the temp reaches 70°C
@@iemstanmayabehera645 I think I'm better off just replacing it with the non x variant and add a a380 or something like that since they come pretty cheap
So I think I'll just start saving for that
Still 70° seems quite a lot
Won't it affect the lifetime of the CPU?
Not sure but most of the people suggest that you can overclock until the temp reaches 70,its your call man. Your cpu, your pc, now I just applied this video's bios settings and my god of war 3 performance increased by almost 10fps.i have a r5 5600g, 16gb ddr4 ram, rtx 2060s ,500gb nvme m.2 ssd, toshiba 2tb hdd
Which cooler Are you using ?
amd stock
i really like this overclocking, been using it for months. recently bought a better cooler, even at 100% cpu utilization it stays at 60 to 70*celcius. do you have plans on making a new vid for those who want stronger overlock?
yes i am working on it
thats nice to hear
Bro memory still showing 1333mha in afterburner what to do
Leaving this incase if i forgot the date
20-4-2024
I overclocked as per video
And still the evening after doing the mess
My pc is running don't know how long it will not show any problems
And I don't feel any major performance change it is same ya for now temperature is controlled or stable but don't know about future anyway it was fun experience
Let's see what will happen
have your tried any benchmarks compares like cinebench or 3dmark something
@@IneffableBenchmarks ya but it doesn't have any big difference just the completion became first but It was good bcz i didn't touch volt settings so it's ok
But I didn't understand the fps u get and I get are very different my fps are unstable up and down not a constant range it can go to 30 to 100
And one more thing I don't know if this problem with me or anybody else
My fps comes more in medium if i play on all low 720p then fps are unstable but if i play in low medium 720p or 900p low medium it runs smooth and High fps like yours
So pls reply
Should i do it or not i m sacred if anything happens i will have no backup system or anything
You should give it a try; this one is much safer, with no changes in voltages.
bro why does my pc boot loop in restart then shows a blue screen after i overclocked it like yours in the video? any one can help?
my mobo is b450m ds3h wifi
reset bios
Can i do this with the stock cooler?
on gfx voltage 2:00 when i type 1300 and then press enter. it automatically converts to 0.00625V. is that normal? fir now i set it to auto since i'm not sure
put 1.3
my pc randomly restarts for no reason, what seems to be the issue and how couyld i fix it?
@@dskgaming2582
thank you
@@dskgaming2582
I Can Use On Ryzen 5 5600h ?
Bro after applying your oc my cpu temps is around 85-90 degrees and cpu does not reach over 4Ghz and sometimes my pc restarts randomly. How do I fix this ?
that means my settings will not work on ur system! reset or tweak settings
@@IneffableBenchmarksWhich settings should I change ?
Will upgrading the cooler at this oc settings improve performance or should I just stay stock amd?
with my settings if the cpu load increase and the temp reaches above 70C, you will notice that freq will start droping from 4.6Ghz, with any after market cooler that's not the case.
Tried it out with deepcool ak400 and it works! 42C standby and 60c under load ( using dedicated GPU ) If ever I wanna try adding 50mhz more so that it will be 4.7 is it fine with the curve settings you used? @@IneffableBenchmarks
Should I overclock with my stock cooler?
Would it cause any issue?
in this vid, i tuned the processor on stock cooler only, it safe just check your max temp if needed change paste or get a cheap tower cooler
Pls reply bro
My manual igpu is not saving the numbers u showing what to do
probably a problem with your mother board battery. unplug it, clean the contacts and plug it again, then try to save the settings.. if the battery is not well-plugged, the mobo cant save the setrings. thats why removing the batery for a few seconds resets the bios
Can i try same overclock on asus prime b450m-a
Will this harm the PC?
ive did this and my oc keeps shutting off how can i fix it?
reset the bios, you system is unstable with my settings, try reducing freq
does MSI B450M-A PRO MAX support this overclocking things ?
Yes
For me there is no amd overclock menu
I use r5600g + asrock b550m steel. But i dont have multithreaded rendering in setting valorant. You know why?
It will only work if you have a motherboard from the same model that was used in the video
If i aint wrong u need 8cores 16threads for valorant multithreading. Maybe check ur bios if it does have multithreading support or check if ur device is actually using all cores. Im pretty much a novice on this topic but im sure ryzen 5 5600g has only 6 cores 12threads thats why the option aint there
Bro i have gigabyte b450 ds3h everytime i set igpu clocks after restart its automatically reset to default 0 and pc restart again and again
Bhai PC kab liya tha
@@lilboy7989 wdym??
@@DemonSoul1222 ??
@@lilboy7989 last month liya new
Having 70°c up in cpu is quite alarming. Not unless u have good cpu cooler
Bro my clock is stuck at 1600 but not 1800mhz like u and even if i change it in afterburner it stays 1600
thats becuase you have a 3200mhz ram and i have overclock my 3200mhz to 3600mhz that why its showing 1800mhz
Is it safe to oc ram ? @@IneffableBenchmarks
hey , does these settings damage your cpu over time ? (btw great video)
Only if your temps are too high
@@alfonso5177 thx man
usually what damagea your cpu is the temperature, if you manage to keep it under idk.. 70 degrees Celsius, everything is ok. but you need to see if it will be stable as well, high overclocks usually get you some blue screens or random crashes
my pc randomly restarting when i play valorant? whats causing the issue?
overheat issue?
Have the same issue. My temps is only 54°
I have my 5600g for like a year with a 4.65 ghz oc allcore 1.3v maybe i will try more but for now the only bottleneck is the gpu
yeah OCing the 5600g make it too good
bro Can we overclock the cpu cores manually in oc with pbo and co with stock cooler I have a new pc so I am scaed a little bit
Bro after I do this my PC restarts when idle. How can I fix that ?
You need restart the bios
hey, how did you lock your cpu clock speed?
i didnt lock it, undervolting cpu pushes the freqs to the max all the time, ofc you need to be decent temps though
I have 3 options
1. 4,65Ghz (min 4,6ghz) 1,32V, 4133 cl 18 1,4V, 2300 1,275V 82⁰C cpu full load almost 65W igpu max 60⁰C.
2. 4,5Ghz (min 4,47 ghz) 1,28V, 4000 cl 17 1,38V, 2300 1,25V 72⁰C 59W cpu, 50⁰ gpu
3. 4,45Ghz (min 4,375ghz) 1,25v, 3800 cl 17 tras 36 1,35v, 2300 1,1v 55⁰c max cpu with only 55W gpu 38⁰c
Test bed 5600g, apacer nox 3600, b450 pro r.2.0 deepcool Ag400.
Type negative, gpu + 200 (all setup fclk, mclk 1:1) manual.
Tested game uncharted, GOW, rspcx3 gow3,
With Ryzen 5700g i can push into 4,7Ghz 4200mhz cl 19 tras 42 note only these can b done with cheaper apacer nox.
after doing this my PC did not enter windows and keep restarting
thats means it not stable with ur chip, reset bios
bro UMA buffer size 3g is safe for 16gb ram and for 32gb ram 4g is safe and okay. And for 8gb 2g
for 16gb ram 2g is not that bad, i have done the comparison of VRAM here- czcams.com/video/EAM6FhW1KH0/video.html
What if I don't have AMD Overclocking in BIOS?
Check for amd cbs
most am4 boards supports overclocking, check for your mobo, there are different names for the same option like AMD overclocking, AMD CBS etc.
@@GamingTest-cz3mpi found it but isn't the same
I did same as the video and the maximum is 2100mhz and the voltage is 1467 is it good?
2100mhz GFX value? which board u got?
@@IneffableBenchmarks B550 AORUS Elite V2
@@IneffableBenchmarks and ye gfx value
I have 16gb dual stick ram and i had 13.9gb usable ram and after oc i came down to 11.9....is it normal?
the oc made it so that your igpu uses 4gb of vram, it takes the vram from your ram, that's why it's only 12gb now.
@@patricjoachimpino won't it affect the multi tasking performance?
@@user-yn4ep9tl5s you can revert it to 2gb if you want while you're not gaming, just go to uma buffer size and make it 2g
@@user-yn4ep9tl5s 12gb ram is still plenty for multitasking unless you really need a lot of apps open in the background or your applications eat a lot of ram.
@@patricjoachimpino thanks for info bro👊🏻
Is the voltage setting automatic or offset?
Same question here
Please bro make a video about msi motherboard, i tried your settings so many times but it occurrs blue screen. Please help bro. My motherboard is MSI b550 gaming edge WiFi
And also How much will be the best value for PBO Scalar with your settings?????
Btw I am using stock amd cooler
I got a bluescreen after a while of use
Overclocking have any effect?
slight performance gains i guess
does b450m ds3h support overcloclking??
yes
Hello! I have a dedicated GPU, can i disable the vega integrated GPU?
yes you can manually disable it from bios
@@IneffableBenchmarks i disabled some settings in bios, but my ram still 31.8/32..
Hello I copied your settings but my cpu stays at 3.67 at max load
which board
@@IneffableBenchmarks I manged to fix it with adjusting power plan settings but the Oc wasn’t stable
Hey bro please reply
Whats the core voltage?????
dont change any voltage settings, leave them to auto
Is it good for processor and mobo?
yup
What do you use as cooler?
amd stock
Good but I think u need to try games like Red dead redemption 2 , Shadow of the tomb raider, Assassin's Creed Valhalla and more games like this not eSports because it depends on CPU and we know that's a perfect one
these games are not that great on iGPU
@@IneffableBenchmarks
Yes I know so that I ask you to test it and see how the performance changed while the overclock
From gta it looks like kind of 5 to 10 fps
I have done this without the igpi part as i dont need it
Tem still 78
on stock cooler? how the performance gains?
It has any bad effect??😊
nope
Bro I'm gonna to build a pc right now I'm gonna with ryzen 5 5600g but in future I'm gonna to buy rtx 4060 can you tell me how mutch fps i got in Very high settings in mordern games and also old gams please tell me❤
Better amd rx 7900xtx.
safe with stock cooler?
yes, i have done on stock cooler
What cpu cooler are u using?
stock amd cooler
@@IneffableBenchmarks does the b550 motherboard u using effects performance? Or is it the same if i use b450
does it work with an a320m-k?
if your board support overclocking then yes
its not harmful for cpu,?
nope, if done correctly
Faz o do ryzen 7 5700g pfvvvv ou me ensinar, que posso grava para vc e vc postar !!
Any improvement on editting
very little but there is improvement in timiline scratching rather then render itself lol
O gpu em 2300mhz travou todos meus jogos quando inicio eles
we have same processor but in stock i only get 120 fps average...
which game?
@@IneffableBenchmarks valorant
@@botheking4180 how many rams?
Bro, there was a problem during overclocking. Is there any way to contact you? Can you help me
You have two options, reset to default settings or remove the bios battery for 10 seconds which does the same thing.
Sorry for bad english my Native language is portuguese.
Explain nothing in the IGPU memory. After a million different videos of how to overclock.
And so my search continues once again
My pc with stock cooler hitting 60-65 on idle with your settings :( . What do i do ?
power consumption?
@@IneffableBenchmarksidk where do i check that ?