Dynojet Power Commander V: Speed and Gear Calibration

This video goes over the optional Speed and Gear Inputs (Connection, Configuration, and Calibration) for the Power Commander V fuel tuner. www.dynojet.co...
For more inspiration and knowledge on maximizing your Power Sports experience, check out our blog: www.dynojet.co...
For more support related articles and videos, please visit our Help Center: dynojet.zendes...
Subscribe to our channel: www.youtube.co...
Instagram: / dynojetresearch
Facebook: / dynojetresearch

[@RodrigoDias-ik4eq]

very helpfull... I ve already tried to send an email for dynojet an it wasn't good explained... Now I understood how to set up maps per gear at my Daytona 675r. thanks!

[@Dragoheli]

Very helpfull.

[@fadzlilie2833]

how adjust max speed for top speed n top gear?

[@DynojetResearch]

Please reach out to our tech support at [e-mail] for help with this!

[@mauro954rr]

the traction control? will be added in the future to the PCV?

[@HalilYenilmez_]

hey, i noticed the Gear Input & Analog input cables were worn out. I took them out to cut a bit and put them back in but now I forgot in what position they were connected. I have put them in according to the fold of cables, but the question is; would it be remarkable if they were wired incorrectly? Thank you.!!

[@balajiinder]

do I need an iginition module to activate launch control, I currently have only the pc5

[@mikeskidmore6754]

There is a lot of confusion as to features from various generations of controllers and for various brands and models of bikes ect..
Flash Tune Brand and DynoJet Power Vision 3 can flash the ECU for miles per hour for example if you change sprocket sizes to re-calibrate your speedometer..

[@DynojetResearch]

Mike, how can we help? What bike do you have and what would you like to do with the Power Vision 3?

[@jerdzo]

Does that mean if my motorcycle doesn't run at 50kmh in 5th gear and I have to downshift every time speed limit is 50kmh. I can chane it ant it will run without downshifting?

[@ScarfaceBikes]

me too my bike when i run from first gear to 4th gear the rpm is 10500 but when i shift the gear to the 5th gear the rpm is to down to the 9000rpm , i can’t open the rev limiter on the 5th gear , i tried to open the rev limiter actuly i open it to 11250 rpm , but still on the 5th gear the rpm down to 9000 rpm

[@kalewatford2282]

So what wire do I tap it into on a Honda rancher

[@DynojetResearch]

Please reach out to our technicians at [e-mail] for help with your specific model vehicle.