Sennheiser Momentum 3 Ear Pad Replacement
Vložit
- čas přidán 27. 08. 2024
- Pretty easy task, carefully pull off ear pads, remove ring, slide ring onto replacement earpad, snap back on headphones.
Products used in this video:
Aftermarket Ear Pads ~$20: amzn.to/2uShSq6
Blue Repair Mat: amzn.to/2QXTSKA
Repair Tools: amzn.to/2tZNWaS
Music from: incompetech.fi...
"like a little ring that comes off" I was losing my mind trying to do this. Thank you, sir!
Couldn't thank you enough man. One of my earpads fell off and I was afraid that I had to replace my entire headphones. Good job!
truly the best of us, saved me from having to go on a flight without noise cancelling headphones 🙏
Holy shit you da man dawg, I was going insane trying to fit them back into that fucking gap
Me too man. Worst part is, I got a part of it to fit a couple of times, which made me think it was doable
Snapping that part back isn't working for me. How did you manage do it?
@@rvke3763 try putting the ring the other side up
@@MarkWithoutName it worked!! thank you very much!
@@rvke3763 oh nice! No problem, glad it helped
Oh my god!!!! You actually saved me from having to take it in cuz I was worried I’d break something. Thanks so so much.
If anyone is struggeling to get it back into the rig. Check the orientation of the ring. Maybe its facing the wrong side (inside instead of outside). It has a small border that needs to face inside!
thank you mate, v helpful!
Champion
worked perfectly. thanks so much, i thought it was a much bigger issue but you saved my headphones! thank you
same here
Thanks - I had a pair of Momentum 1s and was going crazy trying to put the pads back on these 3s the old way, trying to thread the leather in the tiny crack without removing that ring. It was so easy after watching your video!
Don't actually need a pry tool. When you're pulling the pads off, you will notice it pulls the plastic piece just a little bit, if you go slow enough, you can catch it with your nails, simply pry up that way (and stop pulling on the earpads at that point)
Credit card would do lol
Thanks for the vid man!
With this I was able to remove the stock pads and put some HM5s on them for my big ears.
What are "HM5s"?
Thank you for the fix. My pad was sliding off one but i was worried about just tearing it off
Mines need to be replaced soon, thanks for providing this replacement instruction manual. Top job! 👍🏻
Thanks so much for making this video! You saved me a lot of frustration.
You really saved me,my god !
I found very useful your viedeo, but I would have found still more useful if you had explained with more detail how to put the earpad back in. I finally managed, but I struggled a bit. Anyway, the video really helped, thank you very much.
Thank you, I was having trouble getting the pads back on after replacing the battery.
Thanks man, mine came lose and this helped me fix it!
Thanks for the directions!
Thanks for that! My dog removed the ear pads from my momentum 3, and I didn't know how to put it back on!
This saved me time and money thank you really a life saver cause I was either bout to buy new headphones or pay someone to fix these thank u thank u thank u 😊💗😊💗😊💗😊💗
How did you clip it back on?
Thanks it works good just be carful to put the ring in the right way
Thank you I was trying to do what some other videos showed for the 2nd version it was driving me crazy
This helped a lot thanks man, here have my like!
"the plastic comes off" Lifesaving tip
You are a HERO. Thank you so much for this.
Vielen dank! Dachte schon sie sind jetzt kaputt!❤️
Thanks man, didn't know it was quite so simple
Its a tragedy that Microsoft has let halo fall so far from grace, Martin O'donnel is still the greatest game composer of all time in my opinion and I will listen to the sweet jazz of odst till the end of my days
omg LIFE SAVER!!!!!! i thought i ruined my favourite headphones
thank u man u saved my life
you saved my life dude :D
you make it look so easy XD
Thanks, that was very helpful. I used a stiff guitar plectrum as a plastic tool, worked perfect
Workes amazing! Thanks so much!!
very helpful, thanks a bunch!
muchas gracias
Thanks so much for this video!
that was very helpful. Thank you so much!
tfs that camera work dude
"Here, let me just pry this part of the headphone off and show you how to get the earpad around it."
*proceeds to do the entire repair out of camera-frame, only coming back into frame once it's done.*
"And there you have it, it's done!"
I'm so sorry you don't understand how clips work, possibly examine where they are and rotate it to the approximate location and press to click it into place.
@@tkf6449 And I'm so sorry you failed at reading comprehension in grade school.
Notice how I'm talking about getting the earpad around the piece you pried off, not getting the piece back onto the headphones.
I'm well aware of how clips work. Perhaps if you understood better how camera frames worked...
@@anonymousskunk Agreed, Utterly useless video.
Thanks a lot ! You saved me a lot of time
Спасибо, а то не знал, как на место вернуть. Thank you!
Thank you!
Thanks bro, you're a legend
It worked! Thanks!
thank you king
honestly, you are a life savor bro. Cheers.
thanks so much, very helpful :D
Saved my time!
thanks, very helpful👍
My noise canceling on the right side is a bit less bassy and doesn’t feel very stereo if you know what I mean will buying replacement ear pads work? Thanks
Essentially the right side is more quiet than the left and all the bass is over on the left as well
Earpads wont help, probably need to replace speaker
thank you!!
Thanks mate
Thanks
What are the big bumps under the padding? Is it normal?
Every unit has them, its not a flaw. They are the NC microphones or something
There is no way I can re-attached my ear pads, after I re-fitted the cushions. Where and how does it snap back on?
Feel it out and keep trying to find the snap points
@@tkf6449 that ain't the problem. They do align up nicely, but they won't snap into place. I even tried with just the oval plastic frame, and I can't fit that on there either. I wonder if they changed some tolerances down the line. My fingers hurt - that is how much and hard I have tried to squeeze these into place. Weird. Right not I feel like I have no other choice, than visit the local Sennheiser distributor and have their repair guy give it a try.
Thankyou
Perfect
My existing M3 pad start to have bad smell that I have to clean it with shoe shampoo regularly. My M2 never has bad smell problem anymore since replacement with PU pad. I replaced it at the same time I got M3 and I use M2 longer due to battery duration is better. I think something to do with PU leather is unbreathable, oil cannot penetrate. I'm considering to replace M3 with PU pad soon to get rid of bad smell.
With the original part you don’t need to fit the plastic into the ear pads but can just switch it
this needs to be further up! i struggled a lot getting the old ring onto the new earpads. when I finally succeeded I realized that I now have two rings on both new earpads :facepalm:
THanks I was stairing at the goddam things for ever
Thanks . video very helpful
does this work for the right side (the side with buttons?) I cant seem to snap it loose. I also dont see a ring there, but only the whole side as one plastic piece
It's same for both sides
Do you think the Momentum 3 pads would fit on the Momentum 2? its getting hard to find replacements for M2 and I can get some M3 replacement pads. Thanks
I've just bought some momentum 3 pads for my M2's as can't find replacement black M2 pads anywhere. The store I bought them from claims they will fit, however the M2s don't have a removable clip like in the video so it's gonna be a pain in the ass getting them on..
@@fourdam Ah nice, let us know how it goes. Thanks
@@kitman8 Got them on! Gave up a couple times as it was so frustrating, but once i realised how to do it was pretty simple. First one took me about 45 mins, second one about 2 mins! Would definitely recommend, they feel so much better with the larger cups, and I think they sound better too.
@@fourdam Aww nice! Just ordered them. Thanks for the recommend!
@@fourdam what? I can't find M3 ear pads anywhere but M2 ear pads are everywhere. But you're saying the opposite. Where did you get your M3 pads?
Thanks mate!
I wish you could make a video doing a battery replacement for this model too
Sorry, I no long have these headphones
What would you suggest to do if the ear touches the inner part of the speaker? I had that happening on the left speaker after three weeks. Could the cushion be stuffed up with more foam to make it slightly thicker? Is the foam accessible or sewn in?
It would be pretty tough to slit the current ear pads and stuff more foam inside because it is sewn in. I would suggest trying out the Brainwavz replacement earpads link: amzn.to/2uShSq6 and giving that a shot since it seems that the earpads are thicker than the original. Only drawback is that it is PU leather and not real leather like the original. Thanks
Your could buy some bigger pads.
I've fit mine with Brainwavez angled HM5s because I got headaches with the stock pads.
I didn't notice an acoustic degredation either so that's a bonus. The sound stage mayve be a little wider, and the noise cancelling doesn't work as well.
If they do become an issue I can switch them out easy enough.
Sound stage is a little wider
I have the same problem with my left earpad as well. Keeps on falling
Cannot fit the new earpads on if my life depended on it. Tried the Brainwavs oval Velour and Hybrid Velours.
the transparent plastic cone/diaphragm behind is pop out, how can I open the headphone to fix it>?
Thank you.😇
THANK YOU….
Здоровья. Спасибо!
thanks!!!!!!!!!!!
Do you have any recommendations for extra large earpads? My ears are kinda too big for the stock ones.
Should have some for sale on amazon if u search
dude u really saved me
Thanks a looot
Is it possible to use the 3.0 earpads om the 2.0? Will they fit well?
It will fit but it will be a little bigger on the 2.0, should hold though
Someone can measure outer dimensions of earpads for M3 ?
Damn. I was worried I would crack the thing in half. Jeez.
Can i use m3 pads to m2?
No
It’s almost all off camera 🫥
I was searching for a shop address
I can't snap it back on
Line it up to the snap points and press down on those areas
@@tkf6449 you're a legend for replying. I can get it on without the muffs. Clicks in easily. But with the muffs on I'm just struggling. Can hear a click or 2 from the north south positions but can't get the other little snaps in. So sad
@@simon824 Did you finally achieve to do it ?
Had same problem. I'd put the plastic ring into the ear pad back to front (the Z axis). Flipped it over and job done.
Fucking hero
What a peace of crap who on earth decided to work it in that way
a
bu kadar kolaymıymış
The camera is not pointed to what you are doing man. I see only small piece of details that I am interested in! Pls pay attention to what people see in your videos.
The most stupid design ever.
Very helpful thanks.😉
Thankyou