Video není dostupné.
Omlouváme se.

Mercedes E-Class W212 Water Pump Replacement M272 Engine

Sdílet
Vložit
  • čas přidán 15. 09. 2022
  • This video was performed on a 2011 Mercedes w212 E300 with a M272 Engine.
    Repair Manual: shrsl.com/4ez3t
    20% OFF Sitewide Code: ZAKI20
    Parts used:
    O-RING: amzn.to/3UkM7wW
    Pressure Tester Kit: amzn.to/3BmgRF4
    External Star Impact Socket Set: amzn.to/3qx7Vc4
    Torque Wrench: amzn.to/3LAqT9t
    Drive Impact Socket Set: amzn.to/3HfG5WB
    Bosch Compact Drill: amzn.to/3s0bsgE
    Socket Adapter: amzn.to/3sntZ9H
    Gloves: amzn.to/3Lz50au
    Shop towels: amzn.to/3A5PONi
    MB Pulley: amzn.to/3qPwjGb
    Belt Idler Pulley: amzn.to/3DdMP5W
    Belt Tensioner: amzn.to/3CbUd0f
    Serpentine Drive Belt: amzn.to/2YIQv0y
    Intake Pipe: amzn.to/3tVDoXd
    Some of links above are affiliate links, which means I'll earn a small commission if your make a purchase from my links which will help out this channel! 🙏
    I am not a certified or professional mechanic. This video is for entertainment purposes only. Zaki Garage assumes no liability for any actions performed by the viewer as a result of the information contained in this video.

Komentáře • 71

  • @nv1493
    @nv1493 Před měsícem +2

    Beautifully done video.
    No crazy intro.
    No history of the M272.
    No background muzak.
    Totally to the point with all needed info.
    Why is this so hard for other videos to do?

  • @armandcurti2598
    @armandcurti2598 Před rokem +4

    i cannot believe that this benz water pump is easier to replace than my 2012 fusion. Great labor by the way!

  • @ianactual6364
    @ianactual6364 Před 6 měsíci

    I used Zaki Garage videos to service my entire 2010 W212 E350 4matic with ease.
    I’ve used hundreds of different CZcams videos to repair many different things on many different cars and even motorcycles - and I have to take the time to honestly say Zaki Garage videos are the most high quality, simple, efficient, well thought-out and edited automotive how-to DIY repair videos on CZcams. This guy should seriously be sponsored and given the backing necessary to do many more of these videos.
    Saving people money, time, and headache - and getting vehicles repaired the correct way, the first time.

    • @ZakiGarage
      @ZakiGarage  Před 6 měsíci

      Thanks 🙏 appreciate the kind words. And glade you found the videos helpful. And hopefully will be able to start motorcycle vids one day soon since you mentioned them ✌

  • @mansouralhajimi496
    @mansouralhajimi496 Před rokem +3

    تحياتي لك استاذ العزيز حقيقة لم اجد قناه علئ اليوتيوب متخصصة في ميكانيكي سيارات مثل هذا القناه نها جميله جدا وهادئ وعمل راقي ومبدع شكراً لك
    أنا ميكانيكي سيارات من العراق

    • @ZakiGarage
      @ZakiGarage  Před rokem +1

      تسلم اخي العزيز 🙏🏼

  • @Npua_Peb
    @Npua_Peb Před rokem +4

    Awesome video! Not like other video that talk talk talk but don’t show you how to do

  • @victoriaparkflyer848
    @victoriaparkflyer848 Před rokem +6

    Professional video and professional mechanic. Danke!

  • @sethbracken
    @sethbracken Před 3 měsíci +1

    Dang, best tutorial I’ve seen yet. Thanks a lot.

  • @genti-ndreu
    @genti-ndreu Před 8 měsíci +1

    Great detailed video showing a professionally executed job 👏

  • @dinoferrara7536
    @dinoferrara7536 Před rokem

    Bravissimo sei il migliore.complimenti.fossero tutti come te.

  • @VGTA89
    @VGTA89 Před rokem

    I Drive a M273 and this helped me very much... Thank you 🙏

    • @ZakiGarage
      @ZakiGarage  Před rokem +1

      Glad it helped 👍, had no idea the M273 is very similar to the M272.

    • @VGTA89
      @VGTA89 Před rokem

      @@ZakiGarage yes they're almost the Same🙂

  • @panki2085
    @panki2085 Před rokem +2

    Good work

  • @cesarbojorquez7418
    @cesarbojorquez7418 Před rokem +1

    Great video thanks

  • @jrh86
    @jrh86 Před 14 dny +1

    Excellent 👍👍👍

  • @santangin
    @santangin Před rokem

    Merci pour cette démo ... tout semble facile ...mais, il y a toujours un mais ...reste à savoir lequel ..!!

  • @larrytuccio6609
    @larrytuccio6609 Před rokem +3

    Fantastic video! You did a great job carefully showing each step. Thanks. There is one thing I want ask, I saw in your video you knew where to place the jack without removing the plastic pan. I have 2014 E250 and was hoping there was a spot where the car could be raised without any damage? Thanks and again I appreciate your help.

    • @ZakiGarage
      @ZakiGarage  Před rokem

      Thanks man , There is a front rubber jacking point you should be able to find pics of it searching "w212 front jacking point". Its visible without removing the lower shield like you said. Your 2014 should have the same jacking point as mine since both are under the w212 chassis.

  • @danilolima3138
    @danilolima3138 Před rokem +1

    Excelente!

  • @frankweber5979
    @frankweber5979 Před 4 měsíci

    Simply perfect job . ! Thx

  • @vernongamble1115
    @vernongamble1115 Před 11 měsíci

    Thank you very much, now I think I can do it and save a lot of $$$.

  • @A4nKar
    @A4nKar Před rokem +1

    Thanks for a great video. I assume M276 is the same? I have 2012 and 2014 E350, so this will come handy one day.

    • @ZakiGarage
      @ZakiGarage  Před rokem +1

      Thx 🙏, Never worked on a M276 but looks similar with more parts needed to be removed from the front of the pump.

  • @ArabAmericanActors
    @ArabAmericanActors Před 10 měsíci

    Great job very professional! My 2014 E350 leaks water from the hose that connects to the water pump , should I replace the entire water pump or is there a way to fix it. The water is leaking right from the O ring that’s attached to the water pump.

    • @ZakiGarage
      @ZakiGarage  Před 10 měsíci

      Thanks , You can start with replacing the o-ring on the hose see if it fixes the leak, its cheaper than a water pump. If the hose is the one damaged and leaking that would need replacement. But I would consider replacing the water pump too if it has over 150k km as preventative maintenance.

  • @jairog.flores2731
    @jairog.flores2731 Před rokem +1

    Hi, how essential is it to do the pressure test after replacing the pump. And if it is, how much and where I can get the gauge with the adapters.

    • @ZakiGarage
      @ZakiGarage  Před rokem +1

      It is important to check for any leaks after replacing any cooling system component in case the new part isn't sealing well. And one easy good way is the pressure test. Have listed a link to the pressure tester in the description.

  • @ammarko1000
    @ammarko1000 Před rokem

    Hello, thank you you’re a life saver. What software are you using. Where can I buy it

    • @ZakiGarage
      @ZakiGarage  Před rokem

      Thx, have it linked in the description.

  • @ynte8114
    @ynte8114 Před rokem

    Hello Zaki, do you have any idea how to repair electric seat on W212? I changed the switch on driver side and now success I checked fuses and all of them are good. Any ideas my friend??

    • @ZakiGarage
      @ZakiGarage  Před rokem +1

      Haven't delt with the seats on MBs before but would start with a multimeter and see if the seat moter is getting 12v and good ground, same with the switch. A wiring diagram would be helpful here so you can check where is the issue coming from.

    • @ynte8114
      @ynte8114 Před rokem +1

      @@ZakiGarage okay Zaki thank you very much.

  • @jamesapple1366
    @jamesapple1366 Před měsícem

    Can I use this method for a 2014 E 350?

  • @jrock5995
    @jrock5995 Před rokem

    Was that a oem part? How did it hold up? I used an aftermarket thermostat and it sucks ass and always gets stuck

    • @ZakiGarage
      @ZakiGarage  Před rokem

      Its an OE part but I can't tell what company made it from the box 3:22 . It does have the MB logo scratched out on it so its the same part you'll get from MB dealer. Got it from a local MB OE parts distributor, so can't point where to get it online. The new part holding up well now at 20k km since install.

  • @csixtythree
    @csixtythree Před 7 měsíci

    What size is bolt 3? I’m getting “3” from the torque sequence. Please I need to buy a replacement bolt because the last owner broke it

    • @ZakiGarage
      @ZakiGarage  Před 7 měsíci

      Seems like its M7x28 part number ( A 002 990 72 22).
      If not, the other two bolts are:
      M8x110 (N 910105 008024)
      M8x75 (N 000000 003395)

  • @dzindzibis
    @dzindzibis Před rokem

    At 5.33 time mark there is oil coming out from the pump. Lower left side. The same happened to me yesterday and i freaked out... Where is that oil coming from?

    • @ZakiGarage
      @ZakiGarage  Před rokem

      Don't know 😆 I didn't think much of it. I assumed it was an oil passage that goes behind the oil pump.

    • @glasser2819
      @glasser2819 Před rokem

      most likely your intake track is filled with oil over flowing out.
      (now you know where the missing engine oil went!)

  • @utube521
    @utube521 Před 9 měsíci

    didn't you have to bleed the cooling system?

    • @ZakiGarage
      @ZakiGarage  Před 9 měsíci +1

      just left the engine running for a while with the cap off till it got hot

  • @c.h.r.i.s2253
    @c.h.r.i.s2253 Před 11 měsíci

    I learned long ago, NEVER drain the radiator from the petcock. It's plastic and after a number of years they will break. Just take the hose off or you could end up doing the WP and radiator.
    And always replace the O-ring on the hose end

  • @Icarryrandoms
    @Icarryrandoms Před 4 měsíci

    Where are you located ? I have e350 need to change water pump

    • @ZakiGarage
      @ZakiGarage  Před 4 měsíci

      Sorry I'm not a mechanic, just DIYing my cars on weekends.

  • @jrock5995
    @jrock5995 Před rokem

    I thought there were 2 water pumps on the m272

  • @jaskarankhosa8157
    @jaskarankhosa8157 Před rokem

    what brand water pump did you use

    • @ZakiGarage
      @ZakiGarage  Před rokem

      Good question, I tried looking up the brand from what's on the box 3:22 but couldn't find anything. I'm sure its an OE part from the grinded out MB logo on it and the shop I got it from only sells MB and OE parts.

    • @jaskarankhosa8157
      @jaskarankhosa8157 Před rokem +1

      @@ZakiGarage okay I’ll grab an OEM one aswell. Thanks

  • @maxrasch7953
    @maxrasch7953 Před měsícem

    Ton nach austauschen?

  • @jaskarankhosa8157
    @jaskarankhosa8157 Před 10 měsíci

    Hi what software do you use for the manuals

    • @ZakiGarage
      @ZakiGarage  Před 10 měsíci

      Every manual is different, I believe the MB one is WIS.

    • @jaskarankhosa8157
      @jaskarankhosa8157 Před 10 měsíci

      @@ZakiGarage thanks bro, just did the water pump job yesterday thanks to your video it went super smooth.

    • @ZakiGarage
      @ZakiGarage  Před 10 měsíci

      @@jaskarankhosa8157 sweet , glad it went ok

  • @djrednitro4116
    @djrednitro4116 Před rokem

    what year is this

  • @gunaouioussama5718
    @gunaouioussama5718 Před rokem

    can I work with you. me too repair cars. I have a little experience in Mercedes Benz w204 and w212 ml 164 4matic gear box. w203 w205 and diagnostic ( star )Mercedes Benz

  • @pb39374
    @pb39374 Před rokem +1

    We didn’t see you out the new gasket on. Did you?

    • @ZakiGarage
      @ZakiGarage  Před rokem +1

      Good catch. Yes, new gasket is on there, unfortunately footage of putting it on was lost.

  • @shibud.a5492
    @shibud.a5492 Před rokem

    Petrol model or Diesel ?

    • @ZakiGarage
      @ZakiGarage  Před rokem +1

      It's a m272 engine, a petrol engine.

    • @shibud.a5492
      @shibud.a5492 Před rokem +1

      @@ZakiGarage Thank you so much for the replay dear friend & MAY GOD BLESS YOU ....

  • @benjassenabulya1662
    @benjassenabulya1662 Před rokem

    Thanks sir but for me I repair trailers

    • @ZakiGarage
      @ZakiGarage  Před rokem

      All the best 👍, trailers are hard

  • @sandracoletti9935
    @sandracoletti9935 Před rokem

    🄿🅁🄾🄼🄾🅂🄼 😪

  • @user-wi9vw4yb9o
    @user-wi9vw4yb9o Před měsícem

    i don't know why you have to replace pump these pump are life time stupid