Video není dostupné.
Omlouváme se.
NEW Atlas N Scale GP38-2 with ESU Loksound
Vložit
- čas přidán 13. 08. 2024
- In this video I unbox and review the new Atlas N scale GP38-2 with ESU Loksound decoder factory installed. See how this locomotive compares to an Atlas GP38 of twenty years ago.
✅ Visit our sponsor, Midwest Model Railroad: www.midwestmod...
✅ Want to get more RTNT? Consider becoming a channel member. Click the “Join” button or use this link to learn more: / @ronstrainsnthings
🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽
✅ RTNT Amazon Page: www.amazon.com...
✅ Amazon Pick of the Week: amzn.to/2TKHT4g
(NOTE: The above are Amazon affiliate links: I make a small commission from any purchased made through these links.)
✅ Save 10% on all regularly priced items from Micro-Mark: The Small Tool Specialists. Use promo code RTRAINS upon checkout. www.micromark....
(NOTE: The above link is an affiliate link. I receive a commission from all purchases made through this link. Exclusions: This offer cannot be combined with any other offers, not applicable to Pre-Orders, Digitrax, SoundTraxx, or 3D items, applicable to merchandise price only, shipping and handling fees not included, gift cards, or eGift certificates.)
✅ Find fantastic foam cutting tools and adhesives from Hot Wire Foam Factory at: hotwirefoamfac...
(NOTE: The above link is an affiliate link. I make a small commission from any purchases made through this link.)
✅ Get RTNT merch at the RTNT Company Store: teespring.com/...
🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽
✅Take advantage of the rewards for your support of Ron's Trains N Things through Patreon:
/ ronstrainnthings
✅ You can also invest in this channel through PayPal:
www.paypal.me/...
Your support is greatly appreciated. Thank You.
🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽
🔸 Contact me via email: ronstrainsnthings@gmail.com
🔸 Join the Ron's Railfans community on Facebook: / ronsrailfans
🔸 Connect on Instagram: / rtrains
🔸 For more about my layout, the Texas Colorado & Western Railway, check out / tcwry
If you like what you see give it a "like" 👍, subscribe 🔔, comment 💬 below, and share it on your social media and model railroad forums.
🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽
Credits:
🤘 Theme Song: "Extremes" by the Lemming Shepherds
Exzel Music Publishing (freemusicpublicdomain.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons...
🎵 CGI Snake by Chris Zabriskie is licensed under a Creative Commons Attribution license (creativecommon...)
Source: chriszabriskie....
Artist: chriszabriskie....
👂 Sound E ffects: LoudTVStatice.wav from Freesound.org by 18hiltc / @rc_swift1772
Licensed under Creative Commons Attribution 3.0
creativecommons...
TVStaticSound by KLEBER KGF from Freesound.org
Public Domain
Equipment:
🔷 Canon Rebel T6i DSLR--amzn.to/2EEGYeO
🔷 Canon Rebel T7i DSLR--amzn.to/32SeFDp
🔷 MX-2000 tripod
🔷 Logitech C922x Pro Stream Webcam--amzn.to/2CaBzfd
🔷 Excelvan 2kW Lighting Kit--amzn.to/2EcHZrH
🔷 Blue Snowball Ice Microphone--amzn.to/2Cb1raG
🔷 HitFilm 4 Express--hitfilm.com/ex...
🔷 Audacity--www.audacitytea...
🔷 The Sun--en.wikipedia.o...
Want to install your own sound decoder in a locomotive? Here is how I did on a couple of mine: czcams.com/video/-tu3eKb31BU/video.html
I wasn't into sound and then a friend showed me his HO Athearn GP40P with it and now I'm hooked!
The new Atlas frame design is a vast improvement over the old style .
Thanks Ron , Mike
Yes it is, Mike. As always, thanks for watching. Lol.
The factory momentum is to enhance the "Drive Hold" feature. You want the loco to accelerate and decelerate slowly when toggling it on and off.
Nice evaluation video Ron. Great sound from a little locomotive. It's amazing what has been accomplished in the past few years working within the confines of such a small space. Stay well Brother. Tom
Thanks, Tom. I hope you are well also.
Ron, you missed one important difference: The electrical pick-up from the wheels is hard wired instead of the phosphor-brass springs. This is a good advance and I am trying to do the same with my older GP 38-2s. Good show.
You are correct. I did not mention that specifically but that is part of the redesign for the ESU decoders as ESU designs to be hard wired.
Hello from Pennsylvania. I own 4 of the 38-2's for 15 years. I will have to buy a few of these sound units. I'm pleased that you opened them to show the frame differences. Wow, no phosphor bronze pick-ups. Fantastic! I love all your videos. Thank you much, Ed
Yes, one of the huge improvements ESU has brought to N scale is direct-wired pickup connections.
These 38-2’s and the other new locos are a nice advancement for N Scale. I recently purchased a C630 with LokSound and I am impressed. Very nice. Thanks for the review.
I plan to get one of these this year.
looks like fun pulling those hoppers!!😄
Nice review Ron, n scale has gotten a lot better in the past few years and with sound making a great impression on it too. We can expect even better things to come as manufacturers stepping up to more challenges form each other....thanks for sharing....Jack 👍
A worthy switcher loco! I have three in Santa Fe livery.
I really don't like Lenz decoders. When I was first getting into the hobby atlas locomotives with LENZ decoders were on the cheaper side. I have since removed them and replaced them with Tsunami 2. Great video and beautiful locomotive.
Yes, the economy Lenz decoders that Atlas used to use in factory installs were terrible.
I have the Indiana Harbor Belt version of this model, and I can say that it is a very high quality model with outstanding sound and control.
My childhood dreams in N scale have come true 😹😹
Great sounds for n scale
Great review of a great model.
They're nice locos, bought both of the Indiana Harbor Belt road numbers and each had unique features based on individual prototypes.
Worth noting that one of the copies I received did not run out of the box (sound only, no movement) and required a quick disassembly, removal of the chip and re-adjustment of the motor contacts to seat correctly up against the contact points on the chip. The contacts are of a different (and I think superior) design relative to the old frame.
The hard wired pickups from the trucks are an NCE requirement and a big improvement as well.
These Gold Series Locos are so hard to find! I live in Austin, TX and we don't have a dedicated Train Shop, I don't see any on eBay either - Do you recommend an online hobby shop? Thank you!
You forgot to mention that the Trucks are wired vs metal spring strips.... I would liked to have seen how well it consists with a non sound equipped locomotive. I would consist it in the middle as a grouping of 3 units. 2 non sounded DCC equipped engines on either side (DCC)(SOUND)(DCC)
My experience is that sound decoders don't play nice with non sound of different mfgrs. Thus, in you case you mentioned, I think your best bet would be to consist with 2 ESU non soound decoders.
Why was the sound cutting off slightly towards the end while pulling the BNSF hoppers?
Without going back and rewatching, if I remember correctly, I think it hit a patch of dirty track.
@@RonsTrainsNThings oh ok, I noticed on ESU the sound didnt fully restart unlike Soundtraxx that resets all the way! Thanks Ron, I'm loving this N scale stuff it's very nice!
Im always amazed at how far N scale has come. If they were this good when i was starting, i would have went with N scale.
Its not too late. LOL
Thanks Ron. How wide and long is the bench work for this yard?
Excellent review. I have a newer GP38 Atlas Gold Series in C&O #4823 and it is one of my favorite engines. I actually have a second one on order. Quick Question for you, when you refer to speed steps what exactly do you mean? I have a Digitrax Zephyr DCC system and my throttle goes from 0-100%. Is speed step 5 actually 5% or are you referring to the CV's? It seems that I read that 0-100% on my system actually equates to several hundred CV's.....
That was interesting!
Howdy Mr Ron wanted to pass on i did get My BNSF 2256 and Wow what Darn cool little Engine and like my GP39-2 Santa Fe's in Koda and Santa Fe Blue Livery and one more my U.P. GP30 U.P. they all have the Better Wire I think hook up to the Frame,
MY Question i wanna Ask and maybe a Project you could Do and Try if you haven't already is take a Kato Engine with a Lok Sound Decoder and set it up basically the same way.. I myself at this time I don't have a Good work Bench to work on any projects or tasks but I'm wondering if a Kato Frame could have small holes drilled then tapped in it to where a small flat screw could be then screwed into the frame & then a solder wire from the Trucks could be solder to the screw thats in the Frame.. if you could do this Ron could please do it on your Regular Channel at this time I have no way to pay for premium channels but maybe next year I can possibly do it I imagine that I could possibly use some kind of card to take care of the Charge i know my Dad would really like one of your Cups he a Coffee Guy all the way..
Thanks and Continue Staying Safe..
What is the MSRP of these? Any idea what road names they offer and do they come in different road numbers? Thanks!
Here is a link to what is available at Midwest Model Railroad. These are about 20% off MSRP.
midwestmodelrr.com/?s=atlas+n+gp38-2&post_type=product
Hi ya Ron, nice little review. Thanks. One question, are the shells of the two locos interchangeable?
YOu know, I didn't try. I'll get back to you...
Very nice video 👍 Thank you
W.O.W.
i want one in wisconsin southern bad, gotta wait till i get my stimulus cash lol
Stimulating the economy through model railroading. 👍👍
How are the couplers? I've heard the best thing to do is change them to MicroTrains right out of the box?
My suggestion is try them. They are accu make couplers. That said, my experience is that usually accu make couplers work fine, but sometimes they can be problematic. On this locomotive they seemed to be fine. If you want all of your couplers to match esthetically than I would suggest changing them to micro trains. The fact is The upgrade to micro trains is inexpensive and easy.
Nice engine, Thankyou for the video. I'm loving this sound for Nscale, brings the layout to life
What dcc system do you use?
Hi, Tony. I am using the MRC Prodigy Advance² wireless that I've had for about 15 years.
Thanks for sharing. The pulling power seems good. How does it compare to the old unit? TMRCI.
I would say they pull equally well, but the new one runs more reliably and is less susceptible to stoppage on a minimally dirty spot on the rails.
@@RonsTrainsNThings Thanks for the info.
Hey Ron! Im a new modeller and cutrently working on my 4x8 layout. This is my first layout. Electrical work and anything to do with wires and power is overwhelming for me. Is there a video that actually breaks down the meanings of different things like buswire or other terms. Also im looking at using digtrax for my layout is there a video that actually shows and describes the purpose for the digitrax or any other brand of electronics for my layout. Im looking at going big now because in 2 years i will be starting on a very larger layout.
Hi, Jeff. It just so happens that my latest video deals with installing feeder wires, and I have a short playlist dealing with various aspects of wiring and DCC. Here is a link. I hope it helps: czcams.com/video/6e6IecGiNtM/video.html
As this engine is a part of the Master range, I feel the detail is a bit of a miss, as it’s Atlas’s top level with road name and number specific detail. This would fit nicely into their Trainman range though
While the detail does not approach that of say a ScaleTrains loco, it is MUCH better than the Trainman line. Those are extremely chunky and unrealistic.
Hey Ron this is Ron I wanted to pass along that Engine Does look & Sound Good I'm hoping get mine Soon and Hopefully I can Team it up with my Atlas GP39-2 Santa Fe I was wondering it is said there are Quit a few features in the Decoder your Horn, Bell, Dynamic Brake Sound the Air Spitters and I've heard these Engine have Brake Squeal if they Do what function turns that sound on n' off or is there such a function or does it have to be Manually switched on through a programmed CV was just wondering it would be neat to also hear some Rail Squeal or as the Engine passes By the Rails being pressed by the weight of the Engine I guess them sounds we'll soon see as these Decoders become a more demanding desire..
I Wanted to add: I heard the Engine Cut out more than once I know I'd be Gritting my Teeth if I was Trying to do a Review and the New Engine I was showing everyone wanted to take a powder on Running Smoothly but I guess that happens to all of us and with my New GP39-2 and my GP30 U.P. both Engines had Quite a Build up of Black Gunk on the Wheels which got Removed rather Quickly before I even Ran the Engines Break in Laps..
Take Care Ron Of Ron's Trains n' Things😏 we look to see some more Great Videos Allen D.
Was the sound from the engine cutting out or was it my 15 year old computer? Great video especially during these times, thanks
On the one clip is cut out a bit due to some slightly dirty track. I had actually recorded that clip first.
Hello
What's with the lack of underframe detaii - even Kaso does this!!
A GP38-2 BNSF Atlas N scale .
I gonna buy a GP38-2 BNSF Atlas N scale with the SD70MAC BNSF Kato and SD40-2 undecorated Kato N scale DC analoges .
I gonna buy a B23-7 Atlas undecorated analoge DC .
That was not smooth slow speet start.