Video není dostupné.
Omlouváme se.
How to Program & Machine INCONEL 625 | XL TITAN-1M Tutorial
Vložit
- čas přidán 20. 08. 2018
- MASTER CLASS - Watch as Titan Gilroy takes you step by step through the entire process of CNC Machining an XL Inconel 625 Version of the TITAN-1M Building Block.
Subscribe for daily content and expert knowledge: bit.ly/SUBTITANS
___
___
FREE CNC Machining Academy. Join the Revolution:
academy.titanso...
Follow us on Instagram:
/ titans_of_cnc_academy
Like us on Facebook:
/ titansofcnc
Join the conversation on our Facebook Group:
/ titansofcncacademy
Connect with us on LinkedIn:
/ titansofcnc
Follow our CEO, Titan Gilroy:
/ titan-gilroy
___
___
THANK YOU to our Partners who make this content possible:
Kennametal - bit.ly/TIKennam...
Autodesk - bit.ly/TIAutodesk
Blaser Swisslube - bit.ly/TIBlaser
Mitee-Bite - bit.ly/TIMiteeBite
Royal Products - bit.ly/TIRoyalP...
JobBOSS - bit.ly/TIJobBOSS
#kennametal #machining #inconel
You know, out of all of the CZcams channels that I don't understand, this is my favorite.
@@cameronimajor4810 If CNC machines are anything like manual then I can't wait to learn CNC also.
🤣🤣🤣
You have to start somewhere.. don't be surprised when you end up an engineering professor. Keep watching Keep learning
@@Convolutedtubules have u learnt yet?
@@JAL707 Yes, I am working in the aerospace industry and I like it.
These inserts shall break upon this inconel like water upon rock! True story!
On a serious note, I’ve been in the trade for twenty years, and I’ve rarely seen teachers as clear and focused as you. I’ve recommended your channel to a number of guys on the floor, and we’re all fans! Keep up the outstanding work! 😀
I'm a older Hobby guy in my garage. Although i don't write G or M code, speeds, feeds and technique are everything. Titan and his Team are BOSS! None of my parts go to the Moon.
I know nothing about CNC, but the way you teach I was able to actually understand exactly what was going on..
Get your tale to school
I've been doing this type of work for almost 50 years, and I always say you're never too old to learn. I did today. Good video, and thanks for the tooling insights.
Gilroy, awesome tutorial! I have never machined inconel but you explained the steps, reasoning and tools perfectly. I really hope people understand the time, effort and expense you have invested in these tutorials. Thank you to you and your team.
Titan, You are an outstanding teacher. I am so grateful for guys like you who will take the time to teach the younger generations a trade that will guarantee their success in life. We need more like you. Keep up the outstanding work!!
Agreed. 2 years into the trade and this channel is so valuable
I just retired after 47 years and half a dozen shops. Wish I had found you years ago. I ran CNC intermittently, and the material list was constantly being added to. I used the net to help figure out some tough situations.
You are by far the best I've seen at explaining some of these hard to run materials.
My background in a nutshell. Retired 5 years, 45 years in the trade. Tool and Die maker, prototype R&D machinist manuals. Back to school spent the last 20 years as a manufacturing engineer process planning , programming (mastercam), tool and gage design (solidworks), and onsite with customers doing design for manufacture anyalsis for Boeing and Honeywell Aerospace. I think you are doing a wonderful job that is so needed for todays up and coming machinist and the industry. Keep up the great work. My story is similar to yours way back when, glad your here.
This, for me, was one of the easiest understanding videos. Thank you
Righteous work !!
I’ve looked a lot over CZcams for tips and pointers for running cnc mill and lathe and the vids were horrible
Then I saw this on my thread and I seen a few videos
And holy cow man the level of detail in witch things are explained and the quality and clarity of the work being don’t and drawn out on the software was perfect for learning purposes
Keep up the good work this
industry can be cut throat
Pretty glad I came across this channel
I'm from Germany. Watch your Videos for a while and have learned a lot what I could optimize with me. Great Video🖒
You explain everything n detail and in plain english . Best way to teach. Thanks for sharing your knowledge!
Titan Gilroy , I hope you read these comments, I want to thank you for your building block series. This is the first tutorial that I have seen that made any sense at all. Im on BB 1M and I plan to do them all. I saved my money and bought a Tormach PCNC1100 and discovered that I was on my own with Fusion and really Tormach. I considered selling it until I found your BB series, now I am learning and confident I can utilize this machine......Thanks Man.
Man i so respect you i love howyou take the time to teach the one thing i have been looking for for year but could not find anyone teaching CNC skills until now so thank you and God bless you!
I learned more in that thirty min video than I did in a year of Cnc classes. Would have give anything for a teacher like that
Thank you!!! Watch the Vlogs and Friday’s will also be on speeds and feeds.
A year?...Get your $ back
If I was young. This would be my choice. Thank you Titan, for all you do to educate Americans and others to become CNC Machine programmers and operators.
I've now watched this all the way through twice. I don't do machining. Still I feel I've learned useful stuff. Amazing.
This Dude is blessed. Truly. To give ur knowledge, for free. FOR FREE!!! YOU ARE TRULY BLESSED. And thanks for blessing us.
Dare I say, Machinery’s Handbook, Old Testament.
TITANS Handbook, New Testament!
You’re changing the game T!!
Sure looks that way
Your videos are amazing. Everything is explained greatly, slowly and patiently, thanks a lot!
I machined Inconel for about 15 years. After learning to machine it, stainless cut like butter.
Awesome !!! Making it look so easy does not mean it's easy. So impressed at the way you share your wealth of experience. Gpd bless you indeed !!!
OK, this is amazing. I have spent many many years learning on my own because of 60-year-old "expert" machinists who thought that I would steal the trade or something. Me also having a M.Sc. in engineering made me sort of a double-whammy of dislike for them.
And having experienced what I call "seal-the-trade" mentality, seeing a video like this with so much info on the nuances of Inconel and holding tolerances there...
This is invaluable!!!
To a 60 year old tool and die maker you did steal their job. Being caught in the middle of a craft changing technology like an old school machinist verses a new school CNC operator was a very cruel place to be. Far too old to relearn the trade and becoming worth less by the day. It was and is a very sad situation.
FUCK BOOMERS. Collectively they did so little to pass on knowledge to the next generation.
thx God I'm living in this era, where information are wide open for everyone, not like 60 years ago when I was'nt born yet, and information are very closed
It's called adaptability and pleass spare us of the woe is me mentality. It's never to late to learn something new. Some people make excuses, others learn to pivot and thrive.
Either you want to learn and you tote tools if needed to get there, or you complain about how they aren't spoonfeeding you.
Titan... you are a gangster. Thanks from Missouri. I'm currently working on the lm6000 engine. Your content is priceless..
I've always found that plunging a chamfer or countersink with a chamfer mill problematic, I prefer circular interpolation. Titan Gilroy can speak to the Common Man in a easy to understand straightforward kind of way, great teacher!
Thanks so much for being willing to share this knowledge , I have worked in shops were people wont teach or shiw. Anyone anything for fear of not being needed or whatever , I call it the old school of thought .
Titan, such passion, innovation, spirit and heart.
Love what you do, do what you love! God bless from Sydney/ Australia.
Technology is truly amazing, with the right knowledge and access you can literally make anything you could ever want.
The production quality of these videos is top tier, fantastic work!
the work you are doing is amazing. a revolution in teaching and approach in cnc is long overdue :)
Hi I used to be a top grade aerospace cnc miller and turner your videos really interested me.
Sadly now I have a neurological condition I cannot do this any more
Thank You Titnan . I did learn a lot. Please keep the videos coming for machining tough materials used in the stamping die field. Such as D-2, CPM 10V and Stainless steel. All soft and heat-treated.
I have never used a CNC, I’m also not a machinist but this channel and quality of work fascinates me
I thought nyccnc was good. But you guys are on a completely different level. Bravo!
Just different experience... I love what they are doing for the makers movement.
This guys deserves a medal
Hi Titans, Thank you so much for sharing such a nice and precise lecture videos. Everyday I learn new things which I never heard of during my machinist classes. I am working as Machinist I and your videos are much helpful to me. Boom!
I so love watching your teaching videos, but right now I have fallen on hard times and have had to put my dreams on hold for a while. Keep up the great work over there as you bring hope to us all.
simply you are the best teacher
I like how slow you speak. I find myself putting your videos on 1.25x speed because It sorta drives me nuts but I understand that some people absorb knowledge much better if you give it to them slow and with emphasis. Good teacher.
I do wood machining so this all meant nothing to me, but the quality of video, the way it was done is still actually fantastic, I watched the entire thing. Keep this up!
Currently in my final session of Machinist trades school up here in Alberta, Canada. We are focusing on CNC Milling (something I have very little experience with as a lathe guy), so this video has helped me understand a bit better what I am not quite understanding in the classroom (it helps to get a couple perspectives). Also, recently dealt with inconel, so maybe I can machine it better next time the job comes up.
I used to work in a machine shup back in the 80's, this stuff is great. Miss those days.
OMG 😱 I would cry for weeks!!! Treat every machine as if it were your own.
This show makes me want to be a machinist God bless you brother wish I was younger
I could pick your brain for knowledge all day long! 👍👍
I know you cop a lot of shit, mainly from ignorant people I'd say but that was a pretty good tutorial and the best part is you're sharing your knowledge 😊
you can hate his style but he does explain it short and to the point and actually shows whats going on as well and provides it free for everyone
I cut cast inconel every day at work. That stuff is so frustrating to cut consistently. The feeds and speeds we use are so much slower than what you just showed. Thank you for the informative vids, keep it up I'm learning alot!
Thanks Titans everyday you are giving something to my brain to workout
Thanks a lot
Keep doing the best teaching always
Hearty wishes
Amazing. I enjoy watching these tutorials!
I am machining inconel on a manual lathe. Had problem with melting the corners off a 3/4" drill running at 200RPM...
I found drilling further with a 1/2" drill at the same speed was much easier. I'm finding this stuff easier to machine if you go much slower than nornal. It's a bit like drilling into a very tough stainless steel, like a piece of Cutlery. Sometimes if I accidentally work harden doing a 1/8" hole I have had success breaking through it using some little single flute carbide router bits...
I've even had success grinding a masonry drill into the shape of the tip of a normal drill to get through something that's work hardened
Through this great video I've got more information and learned more (only theory, unfortunately) than from any other vid on CZcams.
Thank You so much for sharing experience and showing manufacturing, machining in so professional and mesmerising way!
I wish I could join Your Academy and learn more!
Cheers from Georgia (Caucasus :) )
I haven't machined Inconel in 40 years... might have had a little PTSD moment watching this!! :-) This channel is amazing - you are so clear in your explanations and the videos are great to watch. But it still didn't make me want to machine Inconel again!! :-)
I always enjoy watching your video clips.Thank you,highly educational.
Dude said, " I just want it to be beautiful." Lol. Me too dude. Me too.
Two strangers have invested genuinely in my betterment. Bob Ross and Titan Gilroy
that is an awesome way on how to get deep into machining,thanks Titan keep it up.
I have too say by far the best walk through video I've seen on feeds and speeds and not taking for granted your audience are all experts and taking your time to explain yourself and the reason why . just so refreshing to watch well worth hitting the subscribe button . as a newbie to fusion 360 and CNC at a late er time in life :) you make learning it so much more intresting .ps bit the bullet and got a brand new mini mill . why sit there thinking about it get out there and do it you never whats around the corner
thanks Titans everyday you are giving something to my brain to workout
thanks a lot.
28:00 and on... blew me away. like from me. subbed. love the detail! 30:50 is such a crucial step in that process..
So this is what you get when you cross an NFL line backer and a machinist .
Man, you're good at explaining the process.
Excellent video my friend. I have a part to make at work ( inconel ). And this video it had been perfect
My starting point from here
Thanks
Speeds and feeds with the proper tools and a machine rigid enough for the material. Simple!
Best explanation I've seen/ Keep up the Great work.
Beautifully explained, Titan!
I smarter after watching this video !!! Awesome tutorial. Love it.
Your video shows me how little I know. Tons of technical know how on display here.
I became addicted to this channel :D
I learned something new from this video thanks for sharing
This type of intelligence is the type that we in the U.S. need badly. I believe we still have the heart to make the world a better place. We can't do that without this type of genius though. Smaller societies with much less population are doing better and that's a shame.
Design a ship to go to Mars? Or a vehicle that lasts forever and runs on a "universal energy?" Who do YOU think will build the parts? Not even pandering here, honestly. Think and then think again about the process, our accomplishments and what we have to do to get back to working on the goal. THE goal actually.
You are Great ! What would America be like if schools had teachers like you?
We would then be competing with China
I like this CNC machining program
Mr. Gilroy your a great teacher!
Thanks Brother
Sure glade you and your team moved to Texas,,I would love to bring over my bride of 48 yrs to see the new Academy and explain to her why I setting 6 plus hrs watching machining and manufacturing new tech-knowledge tips at 68,,,(@@) Oh yea,,Boom,,Boom,,Boom, Lov it! Bear
Awesome video. I love this TITANS of CNC: Academy program, any questions I can think of are answered later in the video. Thanks so much for the free content!
Inconal is in the superalloy class.keep them videos comming.
Greetings from Germany love this type of Videos you‘re doing! Didnt know inconel before...
After watching your'e video, I realized that I work with idiots .
Great explanation 👍🏼👍🏼...I work with 718 we make turbine discs!!! I work in production so at times it can get repetitive
Thank you for choosing love over hate 👓
Cool stuff Titan. I've been running VTLs (w/out live tooling) since 2006 and am looking for a new job with VTLs with live tooling so I can up my game. Been watching your mill videos to learn more about milling. Thank you.
Absolutely loved this video! Well done.
Wow. Interesting to see Inconel is mostly comprised of Nickel. I had always assumed it was a type of steel or stainless steel (iron) based metal alloy.
its a nickel chrome alloy, small percentage of other metals but like 90% nickel/chrome. highly temperature and corrosion resistant
Coolest tool changes i've ever seen
Hi! I currently work as a CNC machinist in the glass industry, but I am looking to find a job in metal machining as the pay is a lot better (Here in Belgium at least). Have you ever worked with glass?
Your videos are very helpful and informative. Keep up the good work!
Really good technical explanation.
Those Go drills are awesome. I used a 9/32 diameter to drill 400 air hammer bits made of s-7 tool steel. The last hole was the same diameter as the first.
Just got through peeling Inconel 625 rods at work today on a bar peeler.
Love you talking in freedom units.
Jeez, Then you ask why everything is made overseas.
@@albert-uj8ci cheep slave labor.
@@johntitor7600 What? in Europe?
But hey keep King Georges inches.
im from germany but i love your Videos :D because i love maschining :D
Thanks a lot for sharing the love .
I like this video the videos was very helpful in my cnc loning
Damn good class Titan.
Somewhere around her I have video of 32 ton inconel castings being machined. Two get bolted together to make the first stage of GE's gas turbines.
I've also machined those same parts.
Am a mechanical inspector I love the quality of the parts
This guy is a perfectionist!
But I guess nothing less will do...
dear sir I learned how to use a thread mill and the strategy of inserting end mill for making pocket. many thanks
you do a better job then my lecturer ever did
Titan, thanks for sharing this information with us! Keep it coming!
I made these comments over a year ago, circling the bowl like all of us. But I was looking down, only seeing the bad. I'm trying to look up more, dreaming of how to climb out and do better. I would ask for forgiveness. The preceding comment helps no one. Machine the stock sides parallel before going into the vice. It reduces the amount of stress introduced from clamping and reduces some of the finished part twist. Only machine what goes into the vice. The Chip Load is defined at the point perpendicular to the vector of the cutter, not where the cutting face meets the material. The amount of "real" material being cut is called Estimated Chip Thickness (ECT) and is FAR less. It would be prudent to ask Kennametal how they find their recommended chip load before adjusting to the ECT. (and the chip load should be) You will find that you can quadruple the feed rate. The biggest killer of this is double cutting chips. Chip evac is CRITTICAL. I left what is below so that you know I read it.
C'mon, a master class should include tips on how to work under .0005". Was the raw stock pre-machined? Know why it is important? The feed rate is too slow for that roughing W.O.C, the tool will dull after a short M.R.R. It will also give the chips more weight and will therefore fly farther. The pile of chips need cleaned out during production. Ask Kennametal for an EM with thru coolant, and run a mist like a Bridgeport Mister. Use that roughing tool path on the pocket floor. Stay .005" away from finish and use a 75-80 percent W.O.C. It will reduce the finish time, remove the Flex from the roughing op, ergo removing double the flex deviation during the first finish pass possibly eliminating the spring pass, which rubs a carbide tool dull sooner.