Oil Pressure Test - How to check Engine Oil Pressure - Diesel or Gas
Vložit
- čas přidán 6. 07. 2024
- I check the engine oil pressure on my New Holland LB75B Backhoe to see why the light is on. Oil pressure test kit: amzn.to/3Kaxi9W
#oilpressure #pressuretest #testkit #howto #diy #amazon #cheap #fix
Oil Pressure Test - How to check Engine Oil Pressure - Diesel or Gas
About the test kit:
JIFETOR Oil Pressure Tester Kit, Professional Engine Diagnostic Test, 100PSI Pressure Gauge Tool with Hose Adapter for Truck Car ATV
OIL PRESSURE TEST AND DIAGNOSTIC: JIFETOR engine oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc.
FITMENT TYPE: The oil pressure test tool includes 3 sizes (1/8" NPT, 1/4" NPT, 3/8" NPT) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100psi.
PRESSURE GAUGE AND HOSE: Pressure gauge adopts rubber cover protected 3" large dial. 0-100psi and 0-7bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter, can be connected to 1/4" NPT and 3/8" NPT adapters directly. Max working pressure: 300psi
EASY TO OPERATE: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disassemble the oil pressure sensor first, then screw on the oil pressure gauge, start the vehicle to operate it at a specified speed, the reading in the pressure gauge is the oil pressure of lubrication system. Please refer to equipment manufacturer's operation instruction and compare to the manufacturer's recommended readings
SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR engine oil pressure test gauge. Any quality related problem in 1 year, we will replace the fittings for free or refund.
Disclaimers:
As an Amazon Affiliate Associate I earn from qualifying purchases at no cost to you. This Video is for entertainment purposes only. SeidelRanch videos may contain paid sponsorships. - Jak na to + styl
Testing oil pressure is pretty easy to do as long as you can get to the sensor. Test kits are pretty cheap ( amzn.to/3rGv6k6 ). Once you find out your true oil pressure, you can start troubleshooting the real issue. Hope this helps. Like and Subscribe! Thanks.
That's a good overview of how to test oil pressure on a diesel engine.
Thank you.
First thing I said to myself was get rid of that orange filter. Everywhere says fram is junk. I hope that’s all your problems
Thanks, I hope so. And I agree, I am not a FRAM fan but I had a hard time finding the Motorcraft filter at the time. I have some now and am going to change it this week. I hope that is all it is, but I feel its probably the by-pass valve.
Thanks!
Welcome!
I have heard you can do a 50% diesel mix with the oil and use it as a flush. Run it for a little while to let it get hot and then drain it. That suppose to help remove sludge and blockages. Don't blame me though if you try it and something goes wrong.
Yeah, I have been thinking about a flush. I have a new video coming online that is the part 2 to this.
I was thinking it was the sensor. Those sensors go bad as much or more than the actual oil pressure issues happen.
I was so hoping it was that. No luck for me.
Were you able to get your oil pressure down? If so, what was it?
I have not been able to yet. New video coming online soon.
Did you figure out senor problem
No. I have plans to drop the oil pan and see what I find. I will update when I do.
Yep. The higher pressure looks like a crap filter. The first thing to replace.
Sadly, I replaced the filter and it had no affect. I plan to pull the oil pan and check the screens next, but I have to get the time to do that.