Definitely something I want to try, but the new update blocks the Speedbox and bricks your motor until you strip it all out and wipe it on a diagnostic! A few people are reporting this at the moment, and it voids your warranty immediately, as it leaves a trace on the system that can't be removed! However, the Speedi seems more straightforward; unfortunately, it doesn't have an app or anything like that, but it doesn't connect to the motor to leave a trace if you need anything from the warranty. Kinda puts you off with the warranty void and system trace sure there would be a way around this 🤔
My (Canadian purchased) 2022 SCOTT Strike eRIDE 920 has the BOSCH Performance Line CX GEN-4 , which has 5 plugs all with wires going into them . Is there some other product or adapter that I'd require to make this work?
Do you use it with the navigation running? Without errors. I will install mine next week and want to know it I can use it with the navigation GPS on phone. Or don't have a phone connected? Thanks.
So sad, it killed my bike again - the "February" onwards batch was recommened but I only managed 171KM before it went into limp mode again. I follow the usage instructions to the letter, and to be fair it's been much better behaved (no crashes, speed freezes, reboots etc.) but it didn't take very long for it to be detected by the latest Bosch firmware.
Hi, in the comments below one of speedbox's 1.b video, there is a guy (Filip) who claims after limp mode took the bike to the dealer who uploaded a new version of the firmware, then clicked on a selection to tell the program that the bike is manipulated and since he has no issues with errors. I don't know how true that is so I asked him if things are still ok after 8 months, I'm still waiting for his answer. Will let you know if he answers.
Please tell us if this is a real thing. I asked my dealer when i had 2 limp modes with 1.0b. They said to succesfully installed many 1.0 kits without anyone complaining.. thats why i think they could manipulate it by software.
@@fubar1075 I heard that not every dealer has access to that function in the diagnostic tool, you need a special dongle for that and probably a password from Bosch directly. Not sure yet if that's the case cause I asked Bosch dealers but they hadn't heard about it or didn't have the dongle.
@fubar1075 Of course they can. They just don't want to. They don't sell you products they basically have leasing agreement since consumers are not supposed to have the right to repair our own purchases.
Definitely something I want to try, but the new update blocks the Speedbox and bricks your motor until you strip it all out and wipe it on a diagnostic! A few people are reporting this at the moment, and it voids your warranty immediately, as it leaves a trace on the system that can't be removed! However, the Speedi seems more straightforward; unfortunately, it doesn't have an app or anything like that, but it doesn't connect to the motor to leave a trace if you need anything from the warranty. Kinda puts you off with the warranty void and system trace sure there would be a way around this 🤔
My (Canadian purchased) 2022 SCOTT Strike eRIDE 920 has the BOSCH Performance Line CX GEN-4 , which has 5 plugs all with wires going into them . Is there some other product or adapter that I'd require to make this work?
Do you use it with the navigation running? Without errors. I will install mine next week and want to know it I can use it with the navigation GPS on phone. Or don't have a phone connected? Thanks.
and what bike / fenders do you have and where can you buy them i want those fenders too they look good
SKS
Baddest tuning ever seen.
Yes! It makes problems!
So sad, it killed my bike again - the "February" onwards batch was recommened but I only managed 171KM before it went into limp mode again. I follow the usage instructions to the letter, and to be fair it's been much better behaved (no crashes, speed freezes, reboots etc.) but it didn't take very long for it to be detected by the latest Bosch firmware.
Hi, in the comments below one of speedbox's 1.b video, there is a guy (Filip) who claims after limp mode took the bike to the dealer who uploaded a new version of the firmware, then clicked on a selection to tell the program that the bike is manipulated and since he has no issues with errors. I don't know how true that is so I asked him if things are still ok after 8 months, I'm still waiting for his answer. Will let you know if he answers.
Please tell us if this is a real thing. I asked my dealer when i had 2 limp modes with 1.0b. They said to succesfully installed many 1.0 kits without anyone complaining.. thats why i think they could manipulate it by software.
@@fubar1075 I heard that not every dealer has access to that function in the diagnostic tool, you need a special dongle for that and probably a password from Bosch directly. Not sure yet if that's the case cause I asked Bosch dealers but they hadn't heard about it or didn't have the dongle.
@fubar1075 Of course they can. They just don't want to. They don't sell you products they basically have leasing agreement since consumers are not supposed to have the right to repair our own purchases.
I'm writing a comment in Korea.
I have a question and if I install this, is there any problem with the warranty on the motor at Bosch?
Yes you will loose ist
Anyway, connecting apps/platforms and (GPS) manufacturers is an important thing for all bike (e-bike) manufacturers .
still working without problems? After reading the reviews, many of them stopped working.
Just use Volspeed or Speed Fun
Hey can i use it with a Rim-Magnet?
hello, When updating by the flow app, can we leave the speedbox or should we remove it, update and put the speedbox back. THANKS
Remove the FLOW completely, I just removed the speedboat as not compatible with "SMART SYSTEM"
don't do any updates .. it will crash .. like I did !
@@paulgriffiths8153 ok thank you vers much
Better do not do updates or use Volspeed or Speed Fun
what's the top speed with the speedbox 1.0? systems without smart system easily reaches 45km/u. Is this also with smart system?
50 km.h. The video is for the Smart System and the bike is equiped with such engine!
@@powerbikesbg thx for your update 👌
Did you do todays new flow software update?
HOW
Does this still work if you havent got a display ?
Yes, it works!
Hola cuál es el chip más nuevo? Y cuál es el que sube par motor ?
The torque is the same 85 Nm. The top speed is 45 km.h.
Where can I buy this.i went to their website but they don't reply.
ebikespartsandaccessories_com
Hi are u still able to reply ?
does the speed box also works if i dont have that bosch display?
Yes but only smart system
So you only need a smart system?
Yes it works!
Can i do this without the display
Yes, you can!
Geht aber nicht , wenn du am E Bike am Hinterrad ein Magnetventiel hast .
Da ist am Motor eine Fehlstelle und kein Kabel. Schade.
Got an error code twice within 2 weeks. Riding 35km/h. Its not worth it to me. I even got the error code while riding.
Have to wait after every ride for the countdown! Just put a diferent tuning by VolSpeed or Speed Fun
pas de code erreur depuis l'installation?
No, may be after time