How to Replace Headlight Bulbs 14-19 Chevy Silverado LT

SdĂ­let
VloĆŸit
  • čas pƙidĂĄn 6. 09. 2024
  • For More Info visit us at: 1aau.to/h/aPy/
    1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded high and low beam and turn signal bulbs. This video is applicable to the 15 Chevy Silverado
    This process should be similar on the following vehicles:
    2014 Chevrolet Silverado 1500
    2015 Chevrolet Silverado 1500
    2016 Chevrolet Silverado 1500
    2017 Chevrolet Silverado 1500
    2018 Chevrolet Silverado 1500
    🔧 List of tools used:
    ‱ Flat Blade Screwdriver 1aau.to/oaoH/1A...
    ‱ Needle nose pliers 1aau.to/ooX/1AX...
    ‱ Needle nose pliers 1aau.to/ooX/1AX...
    Subscribe: / @1aauto
    Check out our playlist:
    Chevy Silverado 2014-2019 3rd Generation: ‱ Chevy Silverado 2014-2...
    Chevy Auto Repair Videos: ‱ Chevy Auto Repair Videos
    For More Info visit us at 1aau.to/h/aPy/
    ⚠ DISCLAIMER:
    While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Komentáƙe • 149

  • @1AAuto
    @1AAuto  Pƙed 4 lety +10

    √ *Watch the Video*
    √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
    √ *Do it Yourself*
    √ *Save Money*

  • @jlogsdon3779
    @jlogsdon3779 Pƙed 3 lety +160

    Theres a special place in hell for the Chevy engineers that designed this mess.

    • @sirjer73
      @sirjer73 Pƙed 2 lety +10

      No doubt I have owned a 2002, 2006, and now a 2015 Silverado. The old ones had the pullout pins for access to the headlight housing. So much easier!!!!

    • @GrouchoTM
      @GrouchoTM Pƙed 2 lety +2

      @@sirjer73 yep! I ain't liking it now!

  • @randomthoughtstoday
    @randomthoughtstoday Pƙed 5 lety +56

    I own a 2014 Chevy Silverado and years before it was much easier to do a small light bulb change they made it so difficult nowadays it's horrible and I want to thank you sir for this video

    • @1AAuto
      @1AAuto  Pƙed 5 lety +1

      +Ch Ha Thank you for your feedback! We are happy we could help.

    • @TheBucktrot1
      @TheBucktrot1 Pƙed 3 lety +10

      They made it where the dealership They can charge an hour to replace a simple lightbulb! Just another way to separate the owners from their money. Makes me angry at Chevrolet.

  • @Marty48034
    @Marty48034 Pƙed 4 lety +18

    Well done. The airbox side headlight is why I'm here. Very good camera angles. Very easy to follow. Best I've seen. Thank you.

    • @1AAuto
      @1AAuto  Pƙed 4 lety +1

      +Marty Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

    • @Marty48034
      @Marty48034 Pƙed 4 lety +1

      @@1AAuto My dust covers were a beast to get off. About 30 minutes for the passenger side. About 5-10 for the driver's side. 2015 Silverado. Thanks again!

  • @jackl.j5197
    @jackl.j5197 Pƙed 3 lety +7

    Awesome tutorial, I just changed mine only took a half hour, the dealer wanted $180.00. Thank you!

  • @davidfromtexas9681
    @davidfromtexas9681 Pƙed 5 lety +20

    Brilliant! My headlight went out in my 2015 Silverado and I followed along and was able to change it out in under 30 minutes. Much appreciated!!!

    • @chuckearp9034
      @chuckearp9034 Pƙed 2 lety +3

      Before all this BS, it took less then a minute

    • @phillippaiz3479
      @phillippaiz3479 Pƙed 2 lety +1

      They post the passenger side. What about the drivers side. That’s the b one

    • @safwsu639
      @safwsu639 Pƙed 2 lety

      @@phillippaiz3479 Driver sure is easier but not by much. Don’t have to remove anything.

  • @clives6197
    @clives6197 Pƙed 5 měsĂ­ci +1

    I know it’s just a lightbulb essentially but I really felt a great of accomplishment when I changed them out. Thank you bro. Sincerely.

  • @TryMyMartini
    @TryMyMartini Pƙed 3 lety +8

    You rock so much! I'm a girl with no tools (I will fix that situation) and by following your video, I did the whole thing with the Leatherman that my brother gave me.
    Edit: By the way, the radiator shroud was missing. Is that something I need to replace soon? I didn't even know it existed until I needed a headlight bulb replacement and watched this video.

  • @MindfulMusic
    @MindfulMusic Pƙed 3 lety +3

    Replaced mine with 6500K white LED bulbs. Way better than factory.

  • @wurly164
    @wurly164 Pƙed 5 lety +10

    Great video, don’t touch the halogen builds with bare fingers the oil from your hand will shorten the life of the bulb.

  • @bigednycles
    @bigednycles Pƙed 8 lety +56

    all that for a bulb wow!!

    • @yodadysmom
      @yodadysmom Pƙed 2 lety +1

      Really not much compared to a lot of vehicles now...

    • @MrBob2212
      @MrBob2212 Pƙed 2 lety +1

      Had to remove my intake and airbox on my 15 charger as well

  • @terrymoses7548
    @terrymoses7548 Pƙed 2 lety

    My owners manual said I had to have the headlight bulbs replaced by the dealer. This video just saved me a huge expense, and probably a week of the truck being in the shop! Many thanks.

  • @fetuaolaulu8066
    @fetuaolaulu8066 Pƙed rokem

    Thank you!! Just got done changing my truck bulb & I used this vid the WHOLE TIME!! đŸ™đŸœđŸ™đŸœ It took me longer than your video but I got it DONE! 😃😃

  • @sluggmom
    @sluggmom Pƙed rokem

    He has such a nonchalant tone, I really do believe it will be this easy ❀ thanks for the confidence

  • @dalemackenzie2187
    @dalemackenzie2187 Pƙed rokem

    I've watched other videos and everyone else always makes it look more difficult to do these little do it yourself projects. A1 videos are the best.

  • @irishgrizlybear9282
    @irishgrizlybear9282 Pƙed 2 lety

    I know the guy who replaced the bulbs in this video! I worked at a gas station a while back and he would always pull up late at night with this old decked out golf. He also had a keep he would go off-roading with a lot of the time, till he blew up the diff one too many times. Keep up the great work!

  • @saradavis3327
    @saradavis3327 Pƙed 2 lety +1

    Thanks! First time changing a bulb and it went flawless. Appreciate the content.

  • @MaCoop3r
    @MaCoop3r Pƙed 5 lety +7

    This is way easier than the body style before it, but definitely more difficult compared to older body styles prior to 2007..

    • @1AAuto
      @1AAuto  Pƙed 5 lety

      +Naw Cuh Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

    • @dylantv9633
      @dylantv9633 Pƙed 2 lety

      The 07-13 easy wym dude

  • @MidNightMass402
    @MidNightMass402 Pƙed 3 lety +1

    i love how you say press down when you pull up

  • @chrisjanson9532
    @chrisjanson9532 Pƙed 6 lety +44

    Thank you for this. Now can we please find the moron GM engineer that designed this thing? Must be the same idiot that designed the spare tire storage system. I love my Chevy but they make it hard to do some of the simplest things.

    • @o.z1992
      @o.z1992 Pƙed 5 lety +1

      I know right what a moron
      My 2004 gmc sierra headlight can be replaced in 5 minutes if that

    • @kristoferfc6525
      @kristoferfc6525 Pƙed 5 lety +2

      It's MUCH easier than the guys that designed the O7-13 Body style Tahoe/Suburban it was a nightmare to do a single bulb

    • @IcedMichaeI
      @IcedMichaeI Pƙed 4 lety +1

      Kristofer FC yup damn near have to take the whole front end off

    • @chrisyetka1477
      @chrisyetka1477 Pƙed 4 lety +3

      Gee, I wonder if they made it hard so the average rube has to take it to the dealer and pay $100, for a $5 bulb?

  • @1manarmyguzman629
    @1manarmyguzman629 Pƙed 4 lety +8

    What happened to chevy simple design? All those steps just for headlight bulbs!! Smh

  • @suckiemee
    @suckiemee Pƙed 5 lety +2

    Thank you so much for that video. I noticed on the way home my front right headlight was blinking on and off. I’m going to find out tomorrow. Once again thanks for that video.

    • @1AAuto
      @1AAuto  Pƙed 5 lety +1

      +suckiemee Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

  • @nrfa6229
    @nrfa6229 Pƙed 6 lety +1

    Best step x step video in my opinion in years. All videos should be step x step just like this one. Do you have one on how to change/replace bulbs for 2015 Silverado LTZ 1500 fog lights? How would I go about installing HID lights in my headlights low and high beams, as well as my fog lights? Any video help would be awesome. Merry Christmas.

    • @1AAuto
      @1AAuto  Pƙed 6 lety +1

      +Nrfa Here is a video that shows you how to replace the fog light bulbs in this truck. We currently do not have an auto repair video that shows you how to upgrade to HID lights. Merry Christmas to you too czcams.com/video/tIhcjaZnECY/video.html

  • @jeffhumphrey979
    @jeffhumphrey979 Pƙed 3 lety +1

    Great video. It took me 45 minutes to change both sides.

    • @1AAuto
      @1AAuto  Pƙed 3 lety

      +jeff humphrey Thanks for the feedback

  • @Nathan-wn5mc
    @Nathan-wn5mc Pƙed 4 lety +4

    Low beams are H11?

  • @jasonhughesfishing3039
    @jasonhughesfishing3039 Pƙed 2 lety

    Great video . Finished in under 20 minutes and I’m no mechanic. Thanks

  • @Truckinstuff
    @Truckinstuff Pƙed 4 lety +2

    Just a Tip. You can take that top bracket lose by just taking the top bolt out on the fender side then just slide it over to the right out of the way!

  • @midwaytowingVA
    @midwaytowingVA Pƙed 2 lety +1

    btw: they make a trim tool remover instead of using wire cutters

  • @Lonestarsmoke
    @Lonestarsmoke Pƙed 4 lety +3

    My check engine light came on but I also forgot to tighten the hose clamp like an idiot lol is this the reason my light came on???

    • @1AAuto
      @1AAuto  Pƙed 4 lety

      +Ryan Perez We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

    • @HoldupHen
      @HoldupHen Pƙed 3 lety

      Same here. Check Engine came on but it never went off after I tightened all the screws? Any ideas

    • @HoldupHen
      @HoldupHen Pƙed 3 lety

      Okay, I basically just took the sensor off and plugged it back in again, firmly. Engine light cut off. This saved me the headache of spending money on a damn diagnostic. Thanks for the video!

  • @gregorycotter6461
    @gregorycotter6461 Pƙed 5 lety +6

    When you were reinstalling the light bulb, you said turn it counterclockwise, but you turned it clockwise for the actual installation.

  • @Fluke2SS
    @Fluke2SS Pƙed 5 lety +1

    Good video, but does not account for 2017 Silverado. I assume regarldess if it's a 1500/2500/3500.
    The headlight assembly is different, and the factory bulbs are xenon phillips all in ones (built in balast/igniter)

  • @jonarment1229
    @jonarment1229 Pƙed 3 měsĂ­ci

    Thanks, guys. Good video.
    Commenting to boost the algorhythm...

  • @markjacob9590
    @markjacob9590 Pƙed 3 lety

    The tail light bulbs are easy, so is the front left headlight bulbs..but to get to that front right one is a lot of work.

  • @CIRCLETHESKYYY
    @CIRCLETHESKYYY Pƙed 4 lety +1

    Much easier than expected, thank you

    • @1AAuto
      @1AAuto  Pƙed 4 lety

      +Bronson Gutbrod Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

  • @Chetguidry09
    @Chetguidry09 Pƙed 10 měsĂ­ci

    Thank you. For the help and showing worked out great for me and dad😊

  • @creedkirkland
    @creedkirkland Pƙed 3 lety +1

    Super helpful, both lights in my 2015 Tahoe went out at the same time, this was a life saver and so much cheaper than paying labor. Thank you!

  • @allenybarra8293
    @allenybarra8293 Pƙed měsĂ­cem

    So it’s the same with the high beams too ??

  • @HeavyChevyMega
    @HeavyChevyMega Pƙed rokem

    What is the part# for the parking light bulbs for my Chevy Silverado LT K1500 dble. cab

  • @kaidenharrietha
    @kaidenharrietha Pƙed 6 lety +1

    Hey I followed your exact steps and everything went fine but my check engine light came on. I took out and plugged back in my air filter sensor but light stayed on. Any suggestions? It only came on after I took the air box out to put in my led bulbs.

    • @the4tham
      @the4tham Pƙed 5 lety

      buy a new chevy truck.

    • @chrisn5079
      @chrisn5079 Pƙed 4 lety +1

      Try disconnecting the battery for 10 minutes, then reconnect. It should go away. If it comes back within 50 miles, go to a shop that does free OBDII scans. They'll tell you whatever code it's throwing.

    • @ronnienichols373
      @ronnienichols373 Pƙed 2 lety +1

      Have a part store check and erase codes most will for free

  • @FJBN24
    @FJBN24 Pƙed 3 lety

    again you save me time and money thank you for the great video

    • @1AAuto
      @1AAuto  Pƙed 3 lety

      +Bryson M Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

  • @whitetailhunter7202
    @whitetailhunter7202 Pƙed 11 měsĂ­ci

    The covers on my 2014 silverado 1500 don't even turn an ⅛ of a turn. They hit the grille support first. I had to pry them out with a large screw driver!😡
    They weren't even close to the notches to release. I don't have enough clearance to even get them back on!

  • @maricardoza1865
    @maricardoza1865 Pƙed 5 měsĂ­ci

    Very useful video thank u

  • @gordongetgood7147
    @gordongetgood7147 Pƙed 4 lety

    Thanks, the video helped so it only took me 20 minutes or so to change

    • @1AAuto
      @1AAuto  Pƙed 4 lety

      +Gordon Getgood Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

  • @Everythingoutdoors902
    @Everythingoutdoors902 Pƙed 2 lety

    I read some say you need the 9005 bulb some say you need the h11 bulb and then others say it's a different bulb that you van only get at the dealer? Can you clarify this please?

    • @waterdude9
      @waterdude9 Pƙed 2 lety

      I purchased a 9005 for mine only to find out it didn’t work. I ended up needing the h11. I have a 2014 Silverado and am unsure if it changes based on the year. Your best bet is to remove the bad bulb to see which one you need.

  • @youthsportsperformance
    @youthsportsperformance Pƙed 3 lety

    Thanks for the step by step instruction.

  • @artcopello4798
    @artcopello4798 Pƙed 2 lety

    Great video!
    Step by step. Thank you

  • @edsent7848
    @edsent7848 Pƙed 5 lety +1

    best video i found. Great job man.

    • @1AAuto
      @1AAuto  Pƙed 5 lety

      +EDWIN CENTENO Thank you for your positive feedback!

  • @youngkemo
    @youngkemo Pƙed 11 měsĂ­ci

    You are my hero thank you!

  • @michaelcolon1441
    @michaelcolon1441 Pƙed 2 lety

    My check engine light came on after I was done and turned on the truck to take it for a drive. I simply had to disconnect the battery for a few minutes and reconnect the cables and it reset the light.

  • @izaacleal3985
    @izaacleal3985 Pƙed rokem

    Ive been driving around in a 2001 Silverado and decided to get a newer chevy so i got a 2015. Why on earth did they make these so much more complicated and hard to get too??? My 2001 was right there and even the headlight assembly just had two pins and pulled right out.

  • @bazlado6444
    @bazlado6444 Pƙed 6 lety +1

    Can anyone help I have a 2014 silverado 1500 and my top driver side turn signal won't stay on but works when I flick the turn signal ideas ?

    • @1AAuto
      @1AAuto  Pƙed 6 lety +1

      +Seymour Butts If the lever will not stay up or down to activate the turn signal, the camber inside may be worn. You might have to replace the turn signal if this is the case. Hope this helps you out. 1aauto.com

  • @johnclemmons923
    @johnclemmons923 Pƙed 5 dny

    Why don't you show how to do the left side headlamp replacement?

  • @edgu71eg
    @edgu71eg Pƙed 4 lety

    Any direction on what I can do to fix my 2015 Chevy Silverado low beam passenger head light would be greatly appreciated.
    It's blew out twice so then I replaced the melted wire harness in back of the light bulb after that it lasted a few days and it blew out again. So, three times and now I'm just not driving at night. Really don't want to go to the dealer.
    I'm not touching the bulb
    Theres no condensation noted

    • @1AAuto
      @1AAuto  Pƙed 4 lety

      +edgu71eg At this time we are unable to diagnose the issue you may be experiencing and would suggest contacting a local mechanic for further assistance. Please do not hesitate to contact us with any further questions.

  • @kelvinchannel9592
    @kelvinchannel9592 Pƙed 8 lety

    you are great cause the turn signaled look difficult

  • @ke9527
    @ke9527 Pƙed 2 lety

    Thanks for the video.

  • @YoSoyElQuesoGrande
    @YoSoyElQuesoGrande Pƙed 9 měsĂ­ci

    Everybody complaining about 6 steps to change a headlight has never changed an alternator on a 2nd gen neon

  • @safwsu639
    @safwsu639 Pƙed 2 lety

    The dust covers are extremely hard to turn whether removing or installing. You cannot really get a grip - and they are so tight you can barely push them in hard enough to turn them when replacing.

  • @mopacslim
    @mopacslim Pƙed rokem

    Thank you very much 😊

  • @whatluck1508
    @whatluck1508 Pƙed 3 lety

    What bulbs do I need for a 2018 silverado 1500 LT

  • @R__K
    @R__K Pƙed 4 lety +7

    Wouldn't it be easier to use a panel popper tool instead of the screwdriver and wire cutters? Seems more risk in damaging fasteners than actually removing them for average people.

    • @davidrussell9290
      @davidrussell9290 Pƙed 2 lety

      I thought the same thing, but used dikes like the video. No issues and most people probably don't have poppers.

    • @IMPCIVLIVSCAESARDIVVS
      @IMPCIVLIVSCAESARDIVVS Pƙed 2 lety +1

      Yeah, probably. But it's probably done this way to show that it can be done without a tab puller, whereas most people have a flathead

    • @mneu8385
      @mneu8385 Pƙed 2 lety

      I agree, I busted my zip ties and those plastic snap rivets whatever they are called and u guys doing this in 30 minutes are the best . I’m still screwing around with my light smh

  • @plainnpretty
    @plainnpretty Pƙed 2 lety

    Thanks this helps

  • @darrinperry345
    @darrinperry345 Pƙed 3 lety

    Easy! Took 10 minutes. Thank you!

  • @paulmichael9318
    @paulmichael9318 Pƙed 6 měsĂ­ci

    i viewed this video numerous times, all but memorized it. but i just couldn't do it. NATURALLY my high beam bulb on the PASSENGER side - not the drivers side - needed to be replaced. the days of an owner doing basic repairs have been over decades ago. first, the red clip on MAS went flying somewhere in the engine compartment, cannot find it. STILL COULD NOT GET THE SENSOR TO COME OFF THE AIRBOX LID, EVEN WITHOUT THE RED CLIP TO HOLD IT ON! WTF. now, the lid couldn't be twisted to get it out of the way. so, i had to remove the support bracket that was preventing the airbox lid from getting out of the way. 2ND, then i couldn't get the air box separated from the hose. IT. JUST. WOULDN'T. COME. OFF. THE. F-ING. HOSE. 3rd, couldn't get the airbox bottom popped off the rad support. THIS was the point of giving up and reassembling and scheduling and pay a mechanic for a simple light bulb replacement, which means taking a day off work to go to the repair shop. thanks for the video, NOT YOUR FAULT, but repairs cannot be done by the owner any more.

  • @brunoserpa77
    @brunoserpa77 Pƙed 11 měsĂ­ci

    Thank you so much đŸ™đŸ»đŸ‡§đŸ‡·đŸ‡ș🇾

  • @eccanuck7
    @eccanuck7 Pƙed 2 lety

    Perfect video thank u

  • @stu8379
    @stu8379 Pƙed 4 lety

    Thankyou!! Helped a lot

    • @1AAuto
      @1AAuto  Pƙed 4 lety

      +Stu Thanks for checking us out! 1AAuto.com

  • @appleofgodseye03
    @appleofgodseye03 Pƙed 4 lety

    A1 thank you guys for all of your help

    • @czarceee5219
      @czarceee5219 Pƙed 4 lety

      Danny Andrea Loza yo did ur check engine light come on after u did this? Lol mine did

  • @ibewsparky4
    @ibewsparky4 Pƙed 2 lety

    If you replace with LEDs your truck with throw a check engine light fyi

  • @dannyharageonesjr.2024
    @dannyharageonesjr.2024 Pƙed 8 měsĂ­ci

    Why not show all bulbs passenger and driver ?

  • @tarbell111
    @tarbell111 Pƙed 7 lety +1

    Your video was great except you left out which one is your highs and lows.

    • @1AAuto
      @1AAuto  Pƙed 7 lety

      +Matt Tarbell Thanks for watching. 1aauto.com

  • @sergioink8150
    @sergioink8150 Pƙed 6 lety +1

    Thanks for the video đŸ€—đŸ€—đŸ‘đŸ‘đŸ‘âœŒ

    • @1AAuto
      @1AAuto  Pƙed 6 lety

      +Sergio ink You're welcome. Thanks for watching. 1aauto.com

  • @WilliamSwartzendruber
    @WilliamSwartzendruber Pƙed měsĂ­cem

    Oh wow. I thought the GMT900 was bad...

  • @EUguitarRULE
    @EUguitarRULE Pƙed 4 lety

    Can anyone tell me the serial number fir the low beam bulb?
    Thanks

    • @1AAuto
      @1AAuto  Pƙed 4 lety +1

      +EUguitarRULE Thanks for checking us out! Low beam will be H11. 1AAuto.com

  • @bigednycles
    @bigednycles Pƙed 8 lety +1

    wait the last bulb was on the passenger side

  • @RunningBears10
    @RunningBears10 Pƙed 2 lety

    Took me 1 hour 😆 đŸ€Ł but I got it done

  • @manboobs3580
    @manboobs3580 Pƙed 2 lety

    Does not work for my 2014. Looks way different.

  • @lukepoolservice
    @lukepoolservice Pƙed rokem

    locking the cover back into place... impossible

  • @tomwilliams5933
    @tomwilliams5933 Pƙed 2 lety

    Always test the new bulb before you put the car back together

  • @belindah4196
    @belindah4196 Pƙed 6 lety

    I just did exactly what u did in this video now my check engine is on, any reason why u think

    • @jmgarcia12
      @jmgarcia12 Pƙed 6 lety

      the air flow sensor is probably confused (if you unplug it)...disconnect the car battery, replug it in. The car's computer will recognize the sensor again (no more engine light)

    • @MexhomieXlll
      @MexhomieXlll Pƙed 5 lety

      Did u plug the intake sensor back in

    • @karleevoorhees2383
      @karleevoorhees2383 Pƙed 4 lety

      belinda h I just had the same problem did you figure it out ?

    • @IVLandDSADPC
      @IVLandDSADPC Pƙed 4 lety

      Check your air intake harness and make sure you tightened the hose clamp down all the way. Had the same issue

    • @alanpineda5741
      @alanpineda5741 Pƙed 4 lety

      It worked for me

  • @rumpelexisting5391
    @rumpelexisting5391 Pƙed 10 měsĂ­ci

    Why didn’t Chevy just build the lightbulbs into the engine???

  • @jeffjones2569
    @jeffjones2569 Pƙed 3 lety

    Thank you for this

    • @1AAuto
      @1AAuto  Pƙed 3 lety +1

      +Jeff Jones thank you for checking us out!!

  • @daviddobbs1364
    @daviddobbs1364 Pƙed 3 lety

    That's a lot of work compared to the tail light. And as luck would have it, mine went out on the passenger side

  • @tdogeatdog4519
    @tdogeatdog4519 Pƙed 7 lety +9

    you've got to be kidding. why so haaaaaard!! *!#t

  • @christophermcdonald1861
    @christophermcdonald1861 Pƙed 4 lety

    Even better the 2016 Silverado ltz dust cap will not come off, so I broke it, yep I don't see a changable bulb inside..... Internet lied again..

  • @Smile4MyAC130
    @Smile4MyAC130 Pƙed 2 lety

    What aboit the driver side? Why didnt you just do both sides đŸ€”đŸ€”đŸ€”đŸ™„đŸ™„đŸ™„

  • @HoldupHen
    @HoldupHen Pƙed 3 lety

    Engine light came on, I guess it was due to the light bulbs

  • @TheBucktrot1
    @TheBucktrot1 Pƙed 3 lety

    All this to replace a simple lightbulb. It just occurred to me why this is. The dealership can bill at least an hour to replace a damn lightbulb! That’s crooked!

  • @tnerbsg8134
    @tnerbsg8134 Pƙed 2 lety +1

    This is NOT the same as my 2019 lolol

  • @doriangreen3231
    @doriangreen3231 Pƙed 2 lety

    To me, vehicles should be designed so that headlights and wipers are easy to change. That passenger side headlight is a nightmare. Jesus Christ.

  • @snapplecreampie
    @snapplecreampie Pƙed měsĂ­cem

    Uh mine is 2017-DIFFERENT than a 2015-!!

  • @RippinNtearin
    @RippinNtearin Pƙed rokem

    Surprised you don't have to take the engine out..

  • @jasonleach6161
    @jasonleach6161 Pƙed 2 lety

    Didn’t show the drivers side

.

  • @Mobius-one
    @Mobius-one Pƙed 2 lety +1

    I’ll just buy a new truck.

  • @Killada3pt
    @Killada3pt Pƙed 2 lety

    Seriously? Y’all couldn’t show the driver’s side? 🙄

  • @johndennis9299
    @johndennis9299 Pƙed 3 lety

    No

  • @jakebennett8853
    @jakebennett8853 Pƙed 2 lety

    God new trucks suck. I could get my entire headlight out on 09 dodge and replace it within 5 minutes....

  • @rockcreek44
    @rockcreek44 Pƙed 3 lety

    What a pain in the ass!

  • @steveneure1246
    @steveneure1246 Pƙed 4 lety

    WTF !!!!???

  • @bobbycampbell9080
    @bobbycampbell9080 Pƙed 2 lety

    You need damn mechanic to change a bulb ridiculous

  • @LeadTechnicianIII
    @LeadTechnicianIII Pƙed 5 lety

    wow i wish my dad wouldnt have bought this truck now i have to deal with it