Devongunsmith Diaries #34 Merkel 200/201E: Frankenstein Repair Job!

Sdílet
Vložit
  • čas přidán 9. 12. 2023
  • Devongunsmith Diaries #34 Merkel 200/201E:
    Frankenstein Blitz Action Repair Job!
    A sorry tale of gun damage and the repairs needed to get it back to useable condition..
    You Tube continually keeps restricting my content!
    Please consider becoming a Channel Member and or get CZcams Premium
    Either will help the channel to grow and continue producing content.
    The Devongunsmith Diaries concept was conceived by me during lock down, and the premise was to be able to perform work without a fully set up gunsmiths workshop, but rather, using just the Cottage Kitchen Table, a few hand tools, some cordless tools, a table vice, and other small DIY tools.
    While the channel is not specifically intended to be a how to guide, it is mainly for entertainment.
    While in the UK gunsmithing must be performed by the Licenced Gun Trade, CZcams is without borders, and if the channel is useful to someone as either entertainment, or indeed helps you to decide if a repair might be possible, then I have been a help to you.
    As an Amazon Associate, I earn a small commission from qualifying purchases, this helps to support the Devongunsmith Channel, The following are products I use regularly.
    The Moly Grease I use is this one: amzn.to/46pJ4sP
    Bisley do a smaller pack of Moly: amzn.to/45xNZqe
    The lithium grease I also use: amzn.to/3tmh4rh
    Light gun oil in a small pack: amzn.to/3LYRKOD
    The Pipe Pliers use to make my custom coil spring pliers: amzn.to/46DzHFE
    The Grace USA gunsmith turnscrews I use are these: amzn.to/45nIx9q
    The Generic version of Mirlon or Scotchbrite I use: amzn.to/46rCGRT
    Wheeler trigger scales I use: amzn.to/3S2sWJz
    My 6mm stock bolt T bar for Beretta: amzn.to/3tuHkQt
    Solvent Contact Cleaner, to use to clean the metal parts: amzn.to/3ZQW0FG
    Browning Legia Gun Oil Spray: amzn.to/46qSUuB
    Cold Blue Gel G96 which I use for touch ups: amzn.to/46PoykX
    Cold Blue liquid smaller Bottle, which I use for complete bluing: amzn.to/3rLF4nt
    Adjustable Hand Reamer Set 17-19mm and 19-21mm: amzn.to/3M1U4o1
    Cutting & Tapping Oil Fluid:amzn.to/3FeMzWX
    Dial Bore Gauge 18-35mm: amzn.to/3M18LHR
    12g brass snap caps: amzn.to/46sVP5X
    Stock Bolt Long Pattern Screwdriver: amzn.to/3PTFL6e
    #12bore #shotgun #repairs #gunsmith #gunsmithing #gunfit
    #gunfitting#purdy #12bore #shotgun #repairs #merkel
    ***************************************************************************
    Music Credits:
    Ethereal Guitars - Alexander Nakarada Updated 5 January 2024
    Content owners: We Are Era Music BV
    Alexander Nakarada is a talented composer from Norway, please check out his content:
    / @anakarada
    / anakarada
    creatorchords.com/
    / serpentsoundstudios
    / serpentsoundstudios
    alexandernakarada.bandcamp.com/
    ***************************************************************************
  • Jak na to + styl

Komentáře • 20

  • @PhilipMcCombe-jf7bx
    @PhilipMcCombe-jf7bx Před 5 měsíci +1

    I think you were very brave to take a job on like this, and very impressed with the work you have done. I had a 201E many years ago and loved it.

    • @devongunsmith4698
      @devongunsmith4698  Před 4 měsíci

      I am here to serve my clients needs..
      I am not afraid to do something that means more than swapping out parts (Armourer work)

  • @dc6869
    @dc6869 Před 7 měsíci +1

    Another very interesting video.the gun looks to be nicely finished on that trigger group.i've never owned a Merkel but they do feel right in the hands 👍

  • @Benbidmead
    @Benbidmead Před 6 měsíci +1

    Nice watch!

  • @user-hl7hx3yf3e
    @user-hl7hx3yf3e Před 7 měsíci +1

    Paul, I really appreciate your videos. You do you and let the trolls do what they will

  • @Retired-Tom
    @Retired-Tom Před 7 měsíci

    Nice to know that even with your experience you struggle. It gives me an occasional tinker confidence to try. I do have to keep pausing or rewatching to see detail though as sometimes you move the parts quickly.

  • @Jeremyurffer
    @Jeremyurffer Před 7 měsíci +1

    Nice job 👍

  • @devongunsmith4698
    @devongunsmith4698  Před 4 měsíci

    The only way I can spend time giving out free advice, is if I have a Mark 3 Webley in for repair.. 😊👍and I make a video for you.

    • @devongunsmith4698
      @devongunsmith4698  Před 4 měsíci

      The Gun Trade is in the Toilet in the UK. Because of Davidson mass murders in Plymouth.
      We are fighting for our lives to survive. I wasn’t trying to be patronising, but if you’re suffering anxiety or depression then you should stay away from firearms.
      That includes unlicensed firearms.
      Poor Mental health and Guns DO NOT MIX. All the best👍

  • @carlwashbrooke8678
    @carlwashbrooke8678 Před 4 měsíci +1

    Hi Paul I have just found your channel I have just been given a Webley MK3 under lever that wants a lot of cleaning up can you possibly give me any tips on how to go about it as it will be my first attempt at anything like this. Your time I know is valuable is there anywhere you know off where I could download a manual please all the best. Carl

    • @devongunsmith4698
      @devongunsmith4698  Před 4 měsíci

      Where in the world are you?
      In the uk you can use TW Chambers, (Google it) for airgun spares. They have exploded diagrams which are a great help 👍

    • @carlwashbrooke8678
      @carlwashbrooke8678 Před 4 měsíci

      I live in the UK do you always patronise people that want some advice just a simple answer would have been more civil. For me it is going to help after suffering with anxiety and depression over the last few years when you make mistakes its always on your mind I only wanted some hints on the way forward

    • @carlwashbrooke8678
      @carlwashbrooke8678 Před 4 měsíci

      Sorry about my reply Paul I take things to heart now and should not criticise your help many apologies suffering with my mental health has totally knocked my confidence and outlook but it can only get better for me sorry once again. Carl

  • @manfrommaryville
    @manfrommaryville Před 4 měsíci

    I’m here to file a complaint: It’s been too long since you’ve released a video (please take that as a compliment). I hope you’re doing well and just too busy for videos. Thank you for the videos you’ve made. They have been very helpful!

    • @devongunsmith4698
      @devongunsmith4698  Před 4 měsíci +1

      It takes many hours extra each job to film and edit CZcams content.
      I need the support from viewers to continue. Like, Subscribe & click notifications, enrol with CZcams Premier, or join my channel members!

    • @manfrommaryville
      @manfrommaryville Před 4 měsíci

      @@devongunsmith4698 I didn’t realize I could support through channel members. As soon as I figure out how to do that I will. Again, thank you for the great videos!