Video není dostupné.
Omlouváme se.
2SS gauge cluster install
Vložit
- čas přidán 10. 03. 2017
- At this point (as others have commented) these can be had without much searching and for cheaper through your local junkyard, or ebay.
If you want to buy it new and spend alot of money or
if nothing else want to know the part numbers. the link below has what you will be looking for.
www.phastekperformance.com/GM...
Just got them for my camaro,I got them off of ebay for a pretty good price along with the harness,definitely makes the interior look a lot nicer
Hell yea!
Nice job! The installation is different on the 2014/2015 models though. The wiring harness is located in the passenger side kick panel and you have to run the wires for the gauges behind or under the dash.
Great video, is well explained and it the guide me to install.the cluster of Gauges on my camaro.Thank you!!
Very good and informative. Mine was a 2014 and harness is under cover on right side. Otherwise same thing.
I JUST INSTALLED MINE ON MY 2014 1LT,,, YOU HAVE TO CONNECT THE T HARNESS BEHIND THE PASSENGER SIDE PANEL ON THE RIGHT FRONT SIDE OF THE PASSENGER SEAT, THE HARDEST PART IS DISCONECTING THE PANNEL,,, THE REST WAS FAIRLY EASY !
Did you use a coupon code when you purchased yours?
@@albertoguerra3995 NO
I always thought the cluster came stock with any ss. My 2013 1ss doesn't have it but no big deal to me. Just seeing a lot of them don't come standard.
Video very helpful, ty. Made it look easy. And it was. Great teacher, lol
So if I take my consul apart yes I undo the one plug up at the top and I can pull my consul out. There is also the harness that is on the passenger side seat near the emergency brake. That's not the three-piece wire harness your showing... correct?
Damn those gauges are so fucking oem that they even do the slow test when start
Great video! Hopefully, you have a Go-Pro now. I understand having to video with one hand haha
I wonder if the gauges are compatible for the 2014-2015 Camaro Z28
I have them from the factory in my 12 45th anniversary v6. Oil quit working and i dont know where the sending unit is 🤷♂️
Hey nice Vid! Is there any programing that had to be done prior to them sending this out? could you theroretically swap them between cars like from a junk yard or is it true plug and play?
Yes, as long as it's the same year group You could swap them from a junkyard car
Plug and play 2010-12 and 13-15 I believe
Yeah I see that now that they grouped 2010's-though 2012's and 13's - 15's whats weird about that is the 13's were part the older 5th gen body style like you have, but not in that same grouping, considering i have a 2013 manual V6 im not sure if the V8 molding and harnesses would hook up to a V6?@@thawkproductions4248
@@johnnydrakos6407 www.phastekperformance.com/GM-4-Pack-Gauges-Cluster-92247189-2013-Camaro-p/phastek-camaro-4-pack-gauges.htm
This has a different part number for the v6 manual and the v8 manual. I am not sure if it's the gauges, harness, or bezel that is different
THawk Productions I got one from a 2015, I already ordered the t harness but mine is a 2010 and I noticed the 4 pack harness on the back has the wire that goes into the gauges, will they work if I just hook the T wire harness like how you did on this video and just leave the previous cable hanging on the side?
Good vid. I'm surprised by the price of this devil for a 2015 SS.
I just bot one for my automatic. Do I need to buy also a wiring harness to make the gauges work for this? My car came stock
Yes, you will need a T shaped harness. similar to what I used in the video
U know were I can found the connector that's all I need
@@freakonatrip did u find one because I want to add one to my car but can't find the connector
fucking sweet i will be getting this for my 2015 camaro
Can this fit a 2011 camaro Ls???
Can I install one of these on a 2010 1ss?, I don't have a 2ss
Yes sir, that is exactly what is happening in the video. Putting the 2ss cluster into a 1ss car
My 2011 Camaro SS has this gauge cluster under the dash in front of the shifter this comes only on the 2ss model but yet my front and back SS emblems are not red they are white
Regardless or 1 or 2 ss the red eemblems are for the RS package. Which I think is only the headlights.. and maybe the rims?
It's also possible at any point someone has added the gauge cluster or swapped the emblems
@@thawkproductions4248 l got the car from a friend who bought it new he didn't change the emblems or gauges so its a 2ss without the RS package he did change the front head lights to Halos is why l was wondering about the white front and back SS emblems very helpful thanks
How did you get just the cluster, panel, and harness without ordering the whole "cover" assembly from gmpartshouse?
www.phastekperformance.com/GM-4-Pack-Gauges-Cluster-92247189-2010-Camaro-p/gm-camaro-gauges-92247189.htm
You're probably after this?
But as other people have commented, a junkyard is a way cheaper route for this
Are the thumbnail gauges temps acceptable because that’s how mine be but the oil pressure goes up when I accelerate
yeah, in the 200's like that is fine (Trans temp image is fine too) when it gets closer to that 3/4 hash mark you probably have a problem.. and if it's at the 320 mark then you're car is probably already on fire lol
and the oil pressure gauge moving like that is normal as well
I’m having issues snapping it back in. It won’t snap in.
My factory 4 pack just stopped working.
Will this gauge cluster kit work on my 2014 camaro ls model?
should be the same for auto tranny right i have a 2010
B_A_G_G_S I can't say for sure but I don't know why it would be different. Just make sure the new bezel you buy is for an automatic car
Do you need to install new harness or something special? Or it just plug and play?
If you buy it new it will come with the needed harness, if it's from a junkyard make sure to pull the small T shaped harness out with the gauges!
I have a 2014 SS Camaro eight cylinder or six speed manual with no gauges, I have somebody that has the gauges. But I'm pretty sure I need the harness that you show on this video and it seems like the dealer and everybody else doesn't know shit. Can you help me find the harness. By just unplugging what's under mine into the gauges that is not going to work... correct?
Rick Dooley look on phasetekperformance website for your harness or shoot them an email. I believe the 2014s are going to be a bit different then a 2011. And I don't wanna tell you the wrong thing
THawk Productions OK thanks I'll try that and I'll let you know how I make out
Rick Dooley did you ever do your gauges ? I also have a 2014 1le but no gauges. I bought some gauges but I need the harness
Rick Dooley hit the junkyard or check ebay their cheap
hi you can use the gauges of another car just buying the harness on ebay
jose figueroa I would assume so, yes
Will this work for an Automatic Transmission on a 2012 Chevrolet Camaro 2-Door Coupe 2LS
3.6L V6 DOHC 24V FFV (Engine LFX) ?
MicrosoftCPU3
If you buy through phastek there is an option under the buy button for Automatic
If you buy it from anybody else, just make sure it says in the description that it will fit automatics, I'm assuming the bezel around the shifter is different
Will this work for a 2015 Camaro 1lt
Metric system?
Do you think this will work with any other ls pcm?
Obnes Saintelot If I had to guess I'd say no,
Unless that other pcm is from a fifth gen
Will this work for 3.6 manual 2014
You'd have to find the appropriate parts, but I do believe they exist
Does this work on an LS/LT?
I'm pretty sure they make one for every variation. What year is yours?
wiil that work on a v6
Can't say they are the exact same, but there are kits for v6 models. On phastek or honestly now that these vehicles are fairly old, a junkyard
Is it the same for 2015 ss?
Isai Baires 2013-2015 for sure have a different harness, otherwise I'd assume most of the installation is the same
Will this be the same for a 2010 1ss?
Casey Bostjancic yes, I would assume so. The gauge cluster says it fits all 2010-2012 SS
I just received mine in from the dealership today and didn't receive the wiring harness and they seem to not know what I'm talking about. Are u able to provide the part number so I can just order from the website you provided.
Casey Bostjancic googling 2010-2012-4-PACK-GAUGE-HARNESS should bring up the harness from a few different websites
Why would u want that when the gauges on the dash say the same thing
DISTRESS I don't believe the dash shows oil pressure, oil temp, or trans temp
Ah no they dont.
Where can I order this at
Gmpartsdirect.com or Phastekperformance.com
Dude.. You can find them on craigslist for $150 all day long at this point.
@@MTXSHO9732vV8SHO send link to one smarty pants
Hi 4 pack Do not work what is the problem?
Adam Al_iraqi is it all properly plugged in?
Do all 4 not work or just some of them? Do they light up or nothing at all?
Nothing at all no light it’s off!
What year is your car?
Thanks my friend I found the problem
can u say what the problem was please. because i have the same i think