UNCLOG YOUR TELL-TALE OUT FLOW & FIX YOUR SPEEDOMETER!!
Vložit
- čas přidán 29. 04. 2017
- In this exciting episode I show the views how to properly UNCLOG their tell-tale outflow and fix their speedometer! Hit that play button and check it out! Please subscribe! Like the face book page! Follow me on Instagram @Chrispowellfishing Thanks for watching!
chrispowellfishing
chrispowellfishingtv - Sport
New boat owner and you helped me solve my problem. Thank you!!!
Great video. Made me re-think my similar problem. Found the "salt" plug and cleaned it out. Thank You.
You saved my day! Great video & fun to watch.
some of the best advise that I got yet
Very helpful video. Thanks for sharing.
50hp Yamaha 4 stroke, built in 2017.This is what worked for me when no water was coming out the tell tale when the motor was running in a large bucket of water. My motor has the garden hose fitting for rinsing with the motor off. What I did to unblock it is simply put my finger over the tell tale orifice to back-flush the line while I had the water running through the hose fitting, which worked great!. Hopes this helps another fellow boat owner!
good info and you got style dude
well done
Good show Chris, like your accent , thx
Hey man, my motor has been giving off some steam and I think this might be the issue (at least I hope lol) Thanks for making this content its been super informative and hopefully it will all work out.
Thank you very helpful x
Great video on fixing broken spiget
Great tips!! 👍
great, thank you.
Thanks for the video
My tell-tale wasn't working after i cruised around at low tide in the gulf and got it stopped up. I usually can get it flowing with a piece of wire I carry onboard but this time, nope. I changed the impeller and I'm working on putting the lower unit back on. This is why it's always good practice to flush your engine after muddy fishing trips and not be lazy. Salty mud can harden in your engine block and cause a lot of wasted time and money. ( Rusty)
Excellent..Thanks for the lesson and valuable time.
I had the same issue with my 50 Merc. Took the lower off and sprayed water up the water pickup tube and flushed all the gunk out.
Jaja 😂 you aré siriouly funny 😄 men . Thanks
Thank you Lord indeed. 👍
Nice humor!:)
I use my zodiac to get me to outer reefs in Hawaii for surfing. Same problem. Aloha :)
Surfing CPA .....
Hello. I am having a problem with my Yamaha 70 2 stroke . It's not passing out water from the pump.out the hose. Not sure if it's clogged up or needs a new impeller. Are you anywhere close to Highlands tx. Just need some advice or help . Thank you very much...
you are pretty funny and i guess you may be late for work. the info was good, now i got mine in the garage i'll check it out too
Good info!
david Cooper thanks for watching man!
Hey Chris, how are you. I have the similar engine in mercury bigfoot 60 2 stroke. My problem is that i have changed the thermostat, poppet valve and the water pump and still no water is pumping in the cylinder. The engine is overheating at idle and the tell tale is working fine. I thing there is something obstructing the water as the engine is in 1 piece can't really do much. Can you help please Thanks Man.
Thanks
awesome. thanks. helpful video.
The mowing comment killed me. lol
I use a marinade syringe filled with water,carry it on the boat so you can use it any time.
So in order for the tell tail to properly pee you need to get the motor to a warmer temperature?? That would make sense when I try it in a barrel that it doesn't flow immediately??
Will a clogged pee hole affect high rpm performance, every time I hit sand it'll bog down when I'm 4500 rpms or higher.?
How simple is this? Tried it on my johnson outboard before replacing the impellor since no water was coming from the tell tale. Problem solved. Thanks!
I think the same thing happened to my 115 yamaha, it was pumping on the muffs. the stopped and the alarm came on.
great vid. you could blow it out in the other direction. The clog was made the same direction.
If water is sputtering at high rpms , no steady flow, but normal flow during low to mid throttle?
👍
Now put a new handle and some stem packing in that spicket! ;)
food stuff
Muddobbers and some wasps and bees will plug that for you!! LGBFJB!
Weed wacker line
Can you tell me why my outboard also has water coming out the rectangle hole below the tell tale hole
what the motor?
My boat doesnt have have a tube going to the telltail
don't do lawn until faucet is fixed!!!!!!
Chekasout 1 😂😂😂 thanks for watching man! 👊🏻👊🏻
It’s a vacuum breaker. You should get a new handle.
If a one to watch a clown I would have went to the circus
Dude, you need to read air compressor safety, because spraying out here in your mouth could’ve got air underneath the skin
Couple of items to change. first don't point air gun at your face. Kids could see you do this. Second blow air thro' the hose from the outside (reverse)
No idea what you did
Disliked. Too much playing around and idle conversation. My time is more valuable than to watch this nonsense.