Amazon's cheapest remote start installed in our Coyote Swap F150. Push Button Start?
Vložit
- čas přidán 24. 03. 2022
- What is up JMR Nation Have you ever wondered what it would be like for two extremely old overweight guys to install a push button, remote start alarm system from amazon. Well wonder no longer me and Jason put that wonder to rest. This week, we install this system in our 95 crown vic swapped coyote swap F150. It has a lot of wires to splice in, but if this thing works, it will be awesome!
🟥 BUY IT HERE!!! Use our Amazon Affiliate link to support our channel at no extra cost to you!
Banvie Keyless entry/Push Button Start Alarm System - amzn.to/34XmTzL
Crimping Tool for Heat Shrink Connectors- amzn.to/3M8niQM
Heat Shrink Ring Terminals - amzn.to/3RAirZZ
Heat Shrink Spade Terminals - amzn.to/3CtXA6i
Heat Shrink Butt Connectors - amzn.to/3yaXWw7
Molex Crimping Tool - amzn.to/3yf6rX8
Automotive Molex Terminals - amzn.to/3SQC7tw
Lug Crimper - amzn.to/3e3j0xE
Copper Lugs AWG2 4 6 8 10 12 with Heat Shrink - amzn.to/3EfhzH0
WAGO Lever Nuts - amzn.to/3fJubw4
Heat Shrink - amzn.to/3MdakS8
==========================================================
🔶 If you enjoyed this click the link to see our latest build she's a biggin • Ep1 SUPER DUTY Front E...
🔶 JOIN our PATREON and Support the Channel! / jmrrebuilders
🟥 Merch! Check out our website at www.jmrrebuilders.com to buy JMR t-shirts, Hats and Beanies as well as all our Amazon products!
🟥 Thanks for Subscribing and supporting this new channel! You can also subscribe to our channel here - / @jmrrebuilders
🟥 See behind the scenes and teaser content on our Instagram - / jmrrebuilders
=========================================================
------------------------------
All I Want For Summer by Del. / del-sound
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/3qgBn5k
Music promoted by Audio Library • All I Want For Summer ...
------------------------------
🎵 Track Info:
Title: All I Want For Summer by Del.
Genre and Mood: Dance & Electronic + Bright
---
🎧 Available on:
Spotify: spoti.fi/3qgvWD4
iTunes: apple.co/3whp10o
Deezer: deezer.com/es/track/1663191882
CZcams: • Del - all i want for S...
SoundCloud: / all-. .
CZcams Music: music.youtube.com/watch?v=ivx...
---
😊 Contact the Artist:
delsound21@outlook.com
/ del-sound
deezer.com/us/artist/397771
czcams.com/channels/0SZ-HqJ.html...
/ artist .
open.spotify.com/artist/7Ig3Y...
/ del_sound
delsound.bandcamp.com
/ del_sound
/ delsound
---
✅ About using the music:
- You MUST include the full credits in your video description.
- You can NOT claim the music as your own.
- You can NOT sell the music anywhere.
- You can NOT use the music as background music for your own musical work without the artist's consent.
- You can NOT use the music without giving any credits in the video description.
- You can NOT remove or add parts from/to the credits.
- You can NOT use third-party software to download the video/track, always use our download links
- You MUST contact the artist if you wish to use the music on any kind of project outside of CZcams.
⚠️ Important:
- If you don't follow these policies, you can get a copyright claim/strike.
- If you need more information about using music, please get in touch with the artist.
- This channel is not an official CZcams channel.
---
💚 Listen to our Spotify playlists
EDM: spoti.fi/30R0jTw
Lo-Fi: spoti.fi/38OptGM
Chill: spoti.fi/3rX5gWN
Happy: spoti.fi/2Qjk6JD
--- - Auta a dopravní prostředky
Glad you like it. I love it, especially on these cold mornings when I get into a warm truck!
Heck yeah brother. Thanks for the help and thanks for the support. KEEP GETTING AFTER IT
That is really a cool device for the money! You guys make it look easy to install too!!
Thanks brother we appreciate the support. It is a pretty sweet ayatem for sure.
Thanks for the shout out boys, always happy to help JMR. Because of you I now consider myself a rebuilder which is both a blessing and a curse as you know. Royote is shaping up nice, love the remote start. Great vid !!!
Thank you so much for being one of the original subs also for contributing monthly and for all the freaking awesome tools you send our way brother. Glad we are able to help for sure and sorry at the same time. Keep getting after it brother.
@@JMRRebuilderswill this work on xj 98?
@@nathanmccumber8965 yes it should work
Thank god I found this video. Got a 1995 taurus I’m gonna do this to, and these old fords are all pretty close in electronics. Definitely gonna buy it soon
Heck yeah brother good luck to you. Please consider subscribing. We would really appreciate the support.
You guys are great. Thank you.
Awesome hope it helps. Thanks for watching if you haven't please consider subscribing
@@JMRRebuildersI got 98 Cherokee u got any video on a/c I got recharge no leaks. Blowing hot air from vents
BOYS!!!!! That is fuggin' awesome! Such a slick set-up! Keep kickin' ass!!!!!
Heck yeah brother we think it's pretty sweet. Thanks for the support brother
Only advice I would give is to replace all those wire nuts with soldering connections. More reliable and it makes wire tucking much easier. Great progress, guys!
I'm right with you. We usually use wire nuts to test our connections before doing permanent ones. Thanks for watching!!
@@JMRRebuildersif my xj already have remote start will this work I want push start because I gotta Jerry rig ignition switch to start it.
I am not sure would have to do some more search. It would have to work in connection to the existing system or you would have to completely remove the system.
Convenient for sure!
Yes it is we think if ya gonna drive old school might as well have some convenience. Thank you for the support
Getting it done guys!! It's awesome to ser the progress you are making.
Thanks brother. Nit sure she will ever be done but getting closer for sure.
This is so cool 🤘
Heck yeah brother thank you so much for the support.
I like that table you used to test that alarm system on
Yeah its pretty sweet built that sucker my self. Glad the onky thing you appreciated is the work bench.
I have a 1994 nissan sentra se-r spec with a vr6 (Volkswagen swap) and ive been looking into buyine a push to start, great job on the builds you guys do cant wait to follow up for more
Thanks brother we appreciate the support. Def a sick build on your part brother. This should work for your setup good luck
This is wicked! i want to put on in my 92 4runner and my 07 Tundra
Love it. It's a great device. Good luck
I have this Kit because a friends gifted it to me due to getting another one and I opened the box and saw all the wiring and it’s been months since then😂 I think I may attempt this soon
Let's go. It really isn't that bad if you have some mechanical know how and wiring experience. Good luck
You, dudes, are awesome...I'm seeing your own show in the future!
Heck yeah brother. Thank you for the kind words. We appreciate it. Check out the rest of our content.
Perfect! Mr. Wilson!!! 😂😂
Heck yeah brother. Thanks for the support and for watching with us
Loved the instruction part 😂🤣😂🤣😂
Yeah some may get triggered by it. Thanks for the comment and support.
"Slicker than snot on a doorknob" yea that part 😂🤣💯💨
Heck yeah brother thanks you.
@@JMRRebuilders Nooo problem 🤙thank you 🤣
Check out the full build series on this truck.
@@JMRRebuilders Awesome!! I will do that 🤙
Imma have to buy a lot of things to break when I decide to do this and the one gauge lol
Yeah man it aint that bad but so worth it. Thanks for the support and good luck
Thanks fb or this video
Hey brother is that how you found us through Facebook? Either way thanks for the comment and support.
🔥🔥🔥
Thanks brother
Great video guys that's exactly what I have been looking for to put into my foxbody Mustang, can you please share the model number on that unit?
Here the link. Good luck thanks for comment and support
BUY IT HERE!!! Use our Amazon Affiliate link to support our channel at no extra cost to you!
Banvie Keyless entry/Push Button Start Alarm System - amzn.to/34XmTzL
badass
Its pretty cool! Thanks for watching!
Ohh, and it looks like you are using the OneGauge. This is an awesome project. I'm doing a 12 valve Cummins swap into an 29', 80s Class A RV and I am planning on using the OneGauge and keyless. Why? The real question is, WHY NOT!?
Heck yeah brother love it. We love one gauge great company and product. The push button is a bit harder but worth it good luck brother.
these kits are universal, there are fobs that match
most car manufacturers.
the proximity can be turned
off. I've got the easyguard
ec002 in both my cars
Yes they are universal. Glad to hear you have sorted it out on your end. Thanks for the comment and support
How u turn it off Cz that a lil annoying
I believe it turn ignition on to run ,not started, then hold down lock button on remote. Horn will honk I believe 3 times. It's been years since I did it
@@mikeswigart9521 ok thx
Me I cut or uncover 6 wires under the dash board and 2 in the steering wheel panel looking for door lock unlock but the were basically inside door panel itself, you need to remove door cover and hook them to door negative wire, and also I was looking to connect the flasher wire to the the turn signal wire in the car but they were just behind the emergency signal button panel. Sometimes the engine diagram is not perfect. Even I had to test wich ignition wir is acc and wich is starter and wich is ignition 1 and ignition two. It crazy, the hardest part is not the keyless system wiring but finding the right wires in your car.
That's some great feedback. Love it.
How do you replace the battery
Glad you asked. Here the video
czcams.com/users/shortsEe7ASjbbIBU?feature=share
Would you be able to get provide a wiring diagram? Or where can I find a wiring diagram to the ignition switch
Hey thanks for the comment. We used all data diy to get the wire diagrams. Good luck.
Thanks for video. How does the system know how long to crank the engine for? What happens if the truck doesn't start after the first few seconds of cranking.
Thanks
Cranking is based on the factory vehicle and it relieving the start signal from device. It works flawlessly. If the truck doesn't start after the signal sent nothing happens.
Niceeeee
Thanks brother.
thanks for the awesome clip, but this system doesnt have wire for hazards lights why or how can i light my lights
Hey brother thanks for the comment and support. On the main harness there is a wire that feeds the flashers at the moment I can't remember the color. It should be in the big image diagram. Good luck.
hi @@JMRRebuilders can i please send you email with a picture so you can show me please
How did you guys figure out finding the right wires on the fuse box?
Looked up a wiring diagram. The haynes manual has a good one. Thanks for the comment !!
What did you use for the "oil feed sense" wire that shows the fuel pump motor? I was just going to put 12v constant to it.
Well we have an after market motor so we taped into the oil pressure sensor to get our signal. Thanks for the comment and support. Greatly appreciated.
Would this system work on a 1996 f350 7.3? It would need the delay for the glow plugs? Any chance u guys near NYC I’d rather pay you to install. Ain’t gonna lie I’m scared to cut wires in my truck lol… great video thanks guys
Hey brother thanks for the comment and the support. Unfortunately we aren't anywhere near new york. It should work for a diesel as you mentioned would Def need the delay for glow plugs. It is doable for sure just takes time and patience. Good luck brother.
Loved it. Is that your jmroyte kanban on the whiteboard in the background?
Lol. I have my kanban on Trello and that one is for Ryan, and he calls me old!!!???
Got it hooked up! Start button works however it doesn’t turn on my accessories like radio and allow me to put it in gear unless I turn the key forward? How did you pull out the key cylinder without keeping the accs on? I couldn’t get the remote to start it either?
OK so this is a big harder to explain via text. The look cylinder actuates a lever inside column. That lever disengages the steering lock and turns on acc. You need to remove it and the cylinder leaving the truck column in the on postion. Also you need to wire acc to the alarm system. Hope this helps. Good luck.
Does the truck have to have a factory security system to make this system work? I know on some of the aftermarket systems If you don't already have the factory set up, it won't work.
No this system works independently of the factory system. Good luck. Thanks for comment and support
I wonder if there is an el cheapo version for manual trans???
Not sure there is a much cheaper than 50 bucks. The same system can work on a manual. The only issue would be you could never leave it in gear. Good luck.
Loved your video! What is the max distance that you can remote start the truck?
Great question we never tried that. Thanks for comment and support
Did this f150 already have the factory remote entry module or not? I'm wanting this setup on a 96 f350 power stroke that does not have OEM keyless entry...
We did not have power locks or windows, so we purchased another truck for those parts. The. The system connects with the trucks interface
Any long-term comment on how it's holding up?
So far so good. We are happy with it for the price. I think there could we a better sensor for vicinity and motion but it's great for the price. Thanks for comment and support
What if your vehicle has a factory alarm. Most aftermarket remote starts/alarms have a 'factory disarm/rearm wire but this unit doesnt.
Yeah no clue on that one. If that's the case then would look for a version that fits your install. Good luck
My push button stopped working all the sudden, Bought a new one and installed it but that wasn’t the issue. Any help??
Well it has to have oil sensor wire to start and the brake wire sensor. I would try those and see.
How’s it going guys I have a question if you don’t have remote locks nor trunk lock would you just void hooking the wires up to anything?
Yeah I'm sure that is fine. We didn't hook up our trunk wire so should be just fine. Good luck to you.
How does it work with current alarm systems ?
Unfortunately we really don't know we never installed on in a vehicle with an existing system. Good luck and thanks for comment and support
how reliable has this been now that a year has passed? my actuator rod broke on my 95 so I'm thinking this would be a good solution
thanks!
It has been great has a lot of kinks to work out and been some what frustrating. But once it is dialed in its a great system and the benefits ate great.
You guys so show us in a video which wires you used
Thanks for watching. If you would like that info message us on Facebook or insta, and we will help ya. We appreciated the support.
How’s this system hold up I’m thinking of installing in my truck
It's OK gotta keep spare batteries on hand for when the fob dies but other than that it's great. Thanks for the comment and support
Something I like from my old 350 is that I can start it and wit out stepping on the break.. can I have that wi this ? or is not POSSIBLE ?
Well you can remote start it with remote. To start it inside have to press the brake since it has a brake sensor switch. Thanks for comment and support
What if car is in anti theft mode will connecting this jump it to the new system will it bypass the red light and start or do I have get original key programmed again then connect this
Hey brother I am not sure this will slove your problem. Sorry. Good luck
If we wanted to install this on a diesel, how would you recommend to incorporate a delay for the warmer for the plugs (6.0L Ex)? Just looking for thoughts and recommendations.
I'm not sure on that one. I know a couple guys mentioned doing it on one of the Facebook groups. I know it is doable but uncertain on how. Good luck brother
From the instructions I’ve read you can turn on the ACC functions by pushing the button once without applying the brake pedal as the button will not start the vehicle without the brakes engaged.
Yes that is correct. I believe he is asking ore for the remote start option as well. But that is definitely helpful. Thanks
Hi can this be installed in a manual transmission car
Yes it sure can just make sure you don't leave it in gear. Good luck
What type of car's can you install the alarm
It can go on just about anything. It's up to your ability to make it work.
I have a 1995 7.3 powerstroke I can’t find any wiring diagram to hook this thing up any way y’all could help me
Hey brother we don't know all that much about the 7.3. However there is a way for you to get full wire diagrams. Go to www.alldata.com/diy-us/en/find-vehicle
Put your year make model and they should have what ya need. Good luck
The question I have is will this work on an original 95 F150, and what do you do about the old key start
Yes it absolutely can work on the obs truck. The original key goes away and the push button goes in its spot. Let us know if younneed any other help
@@JMRRebuilders Cool, I'm a have to do that
@@JMRRebuilders how hard would this b to install my truck don’t have power locks or any of the goods plus it’s got the 300/6 with a 4 speed manual and it’s a 95 reason
It obviously won't work on door locks however it wouldn't be that hard. You would get the remote start feature and push button capabilities. Good luck
@@JMRRebuilders so ordered one from easygaurd my question do I connect all the acc wires to the one that the kit says is acc
Ryan, couple of questions. Did you have to bypass the key? How did all that work? Also, do you work for Duke Energy?
Hey brother gotta say your the first to ask a question directly to one of us by name. Really neat. Yes in our case since our key unlocks steering column you have to by pass the mechanism.
We simply found the piece that is engaged by the key clyinder and disabled the mechanism.
I do not work at Duke. Would love to know why you ask that though.
Thank you for comment and support.
Can make a video explaining how you got your door locks working?
This is the hardest part for me and I don’t even understand the instruction.
I remember this being a major pain. I had to look up what kind of lock triggering system we had on our truck and then use the proper diagram. Do you have the wiring diagram that came with the unit??
Here are links for wiring diagrams for the locks. It' as much as I can help really.. Worst case senario is find all the wires and label them, then try the various configs for triggering and give it a try (at your own risk). This is what I would do. cardiagn.com/kia-cerato-forte-ewd-power-door-locks/ --- full diagrams here - cardiagn.com/kia-cerato-forte-2019-2020-full-electrical-wiring-diagrams/
Can you still lock the doors manually while the fob is in the vehicle and the vehicle is running?
Yes you can for sure. Let us know if you need anything else and good luck.
@@JMRRebuilders
Thanks for the quick reply. Looking to do this to my ‘14 F150 and now just trying to figure what I need to do to bypass the signal from the original keys chip and what to do to the original opening for the ignition cylinder.
Yeah that is a good question. I am certain there is a way can't imagine there isn't. Good luck may the internet be in your favor
That proximity unlock/lock may get annoying at car meets/ shows etc
Yeah thats a good point for sure. Thanks for the support brother
What would you rate the difficulty of the wiring? I want to install this on my 94, but I really couldn’t be bothered messing with wires that are super difficult to install.
Well, it isn't at all intuitive. So if you're not unto it, it may be frustrating. Good luck. Thanks for the comment and support
@@JMRRebuilders Thanks, I’ll see what I’m working with when I get the kit. I might have to pay for someone to install it if it’s too complicated for me😂😂
Let's go.
I was thinking about installing this but I was wondering if it’s required to install the push to start button, I just want the keyless entry and remote start. Thanks!
I believe you can do it without the button. Good luck we appreciate the support
I want to buy this. I have a GHOST JDI PUSH TO START CONVERSION KIT on my 2012 Honda Accord. I just want to use the Wireless Key Remotes to work with my JDI system. Is that possible?
Is there a link to the product?
Yep. Thanks for watching. Banvie Keyless entry/Push Button Start Alarm System - amzn.to/34XmTzL
Hi there, do you think it will work on a mid 90s gm truck
Hey brother thanks for the comment and support. It absolutely will. You will need to sort our wiring and such but yes it will. Good luck
Got this and it nice but kinda sucks one time it wouldn’t turn off and just kept trynna start it while it was on so I just reversed and parked again and I was able to turn off after a min or two almost messed up my starter and the remote start doesn’t work it does that unsuccessful start that’s described in the manual
Thats rough for sure. Thanks for the support and comment.
do these kits work on cars that had chipped keys?
The key would still have to be near the column to somehow work I would assume. But I really don't know
@@JMRRebuilders maybe il take the chip out of the key and put it in the key fob
Would a person need keyless entry to use this?
This system comes with Keyless entry as well. Thanks for the support and comment
What brand Is this
Here is the link. Thanks for watching and commenting
Banvie Keyless entry/Push Button Start Alarm System - amzn.to/34XmTzL
hey guys on minute 4:50 you could here the starter, but it didn't cranks, couple seconds later it did crank! how did you manage to do that? Mine still won't crank, but you can hear it click!
Please help me :)
I believe it was the low oil switch or brake switch we had to bypass. Good luck and thanks for comment and support
Can you tell me what wires I’m tying into on these trucks ? I bought the same system basically but all i need is the ignition. Everything else is manual. Any tips I would appreciate. It’s confusing!
Hey brother I am not sure which wire to use. We did a coyote swap so we just hooked it up to the start wire on the coyote. There is a large red and green wire behind the dash cluster that maybe the one you need but not sure. Good luck
Thank you for the reply. I ended up figuring out how to wire it in and bypassed the break to the accessory two wire so it starts after the initial press and if it doesn’t, you can hold the button on the second as long as you need. For $25 I am impressed and it even came with an antitheft feature with little tags that you have to scan. Your video was still a good watch. Thanks for the content.
@@JMRRebuilders this truck has also not ran in 19 years and I finally got to hear it run yesterday
Heck yeah that is awesome
How did you install button in the ignition port?
Hey thanks for watching and commenting. We took the factor key clyinder out and locked it in place then put the push button in its location.
When you did that you had to have it in the ACC/ON position correct? If so how do you keep it from draining the battery while off if you understand?
How you guys liking the system thinking about getting this on my 91 f150
It really isn't a bad system could use some minor adjustments and takes a lot to figure it out since none of it is clear on installation. That being said for the price and capability you can't beat it. Good luck.
JMR you say it needs minor adjustments but you don't say what those may be. In the video it seemed to not work initially. Or " bind up ". Especially when standing near the car for an extended period. I have one just have yet to install. No professional wants to do it. There's no us customer service or dealers. Also the professional installers say after time they simply stop working or pke malfunctions. Please give us a followup video or Information on the product please.
I have had one in my car for 6 years with no problems. And I have also installed 5 others
For family and friends and they have been all
Different cars. No issues from any of them
So far. It’s been at least 2 years. I have
Only installed the easy guard ecoo2
So, does this system eliminate the key entirely?
Yeah man sure does. Pretty sweet bro. Thanks for the support
@@JMRRebuilders hold on, so you can pull the car into drive mode without turning the key?
does this apply to 2019+ cars?
Not sure I understand the question. The ignition is controlled by the push button and allows the vehicle to be put in gear yes.
@@JMRRebuilders in other pke videos. they have to stick a car key in the ingition and turn it on to acc.
you say the original key dont need to be insert?
@@Sniped_Clipzzzy correct we removed the lock clyinder and made it like the current push button vehicles on the road today. No key needed
just remember to also buy a faraday box for the remotes when parked as thieves use an RFID signal booster to pick up the fob signal in the house to unlock/start your vehicle.
Interesting. The thought never crossed my mind. thanks for the comment!
What thief walks around with that so they can take a 1990s truck? 😂
So I can put this on my 2001 ford f150.
Sure it is universal so could be put on just about anything. Good luck
does it still work after a year?
Yes it does love it. Thanks for comment and support
What video did you guys watch to install it?
We didn't there isn't one. We just figured it out as we went. Thanks for comment and support
@@JMRRebuilders Why not making one if you guys know the process i'm thinking of getting one but I don't want to mess up my car lol
Thanks for reaching out and that would be a great idea. Unfortunately we are not really a how to youtube channel and isn't something we really want to do. The system is worth 50 bucks and can be easily installed if you have the mechanical know how and desire to get it done. Good luck
I lost my key of my truck will it work still????
Well that sucks. You can get new lock clyinders with cut keys online. Sorry not much help. Good luck to you.
any idea what happens if your key fob is dead will it still start?
can you just place the dead key on the button and start it?
No clue on that I imagine the answer is no. One of the guys we know who did said he keeps a spare set in the truck
No clue
Is this a universal?
Yes it is and can be installed on any vehicle. Thanks for the comment and support.
does it needs a key??
No it doesn't however you will need the key to get the clyinder out and remove steering lock
First off great video! Are you guys in FL and want to get hired to put one in my car?
Hey brother, thanks for the comment and support. I used to live in Florida. Unfortunately, we can't really take on that project. Good luck
What’s the name of that brand? 😮
Hey brother thanks for comment and support. Here is the info on it.
Banvie Keyless entry/Push Button Start Alarm System - amzn.to/34XmTzL
How has it held up after a year?
Still works great and has not had issues. Good luck
@@JMRRebuilders awesome, thanks!
Why was it flashing in the first place? I'm dealing with the same problem
I believe the issue was we didn't have the brake wire or another wire connected. Thanks for the comment and good luck
@@JMRRebuilders thank you for replying back...I pressed the reprogram button and got the button to light up solid. Everything works except for the remote start and the two brown wires for the lights to flash aren't working. I did a kit similar to this one on my mustang and everything turned out great. This is kinda driving me nuts 🤣
@Wolf Lord yeah they can be fickle. I'm sure it is something simply like you just sorted. Good luck to ya brother.
@@JMRRebuilders you're absolutely right. I'm wondering, did you wire up the E brake? My kit came with a 7 pin harness and it shows the 2 brown wires are to be used for either the park lights or one wire to the trunk release and the other to the E brake.
@@JMRRebuilders I'm sorry to keep bothering you. Disregard my last comment. My remote start finally works now. So with this kit, there's a 7 pin out harness. The main two wires that troubled me were the brown with white stripe and brown with black stripe. The options were use the two wires on a positive output for the lights to flash or use brown with black stripe for trunk release and brown with white stripe for hand brake check on negative output. Since I installed the kit on my 02 f150, I went with the logical choice of using the brown wires for the flashers. Anyhoo, thanks for the video and advice, you've been more than helpful. Hope all's well 👍
How do you turn on the car to use the radio without turning on the engine?
Hey brother thanks for the comment and support. You press the start button but don't put your foot on brake and it goes into acc. Good luck
@@JMRRebuilders ok thank you, so you press it twice without putting your foot on the brakes to go into ON to be able to wind up the windows?
No just once for acc as long as foot is not on peddle. Also can wire in the windows to be controlled by the remote. We just not to
@@JMRRebuilders ok thanks again
Yeah man no worries
Is universal?
Yes it is universal. Would highly recommend having a complete vehicle wire diagram before beginning
i have a 1994 ford f150 and i have the same system as you guys, i have the push button working but not the lock and unlock, and i also try to use the remote to start it and it starts for a second then shuts off. Is there anyway you guys could show exactly which wires go where? It would help a lot
Hey brother thanks for comment. Unfortunately we don't have any photos of the wires for the door locks and it took us some trial and error to get it right based on the different wire setups. The remote start thing make me think your oil pressure wire. We just ran it so it get signal at all times. Thereby bypassing it. Hope that helps good luck
@@JMRRebuilders So would it be okay if i just hooked it up to a 12V constant?
@@londonbrokar3524 yes but do realize it will not be a safety that it was designed for
@@JMRRebuilders okay thank you👍🏼
@@JMRRebuildersso i got the remote start to work! the only thing i have left is the lock and unlock. did you guys have to use a special relay for it to work? i got sent a “free relay” with the kit.
Yall should of used a toner. Would of helped a lot.
What do you mean about a toner? Thanks for the comment and support.
I had one of these fail and the car wouldn’t turn off
Yeah that would suck for sure. What did you end up doing?
could you guys do a tutorial how to do this whole process. the instructions suck lol
Hey, thanks for reaching out. That is a really great idea, and I wish we could. However, we really can't go back wards and create that content now. There are a ton of videos that show it better than us.
CAN THE CAR BE STARTED WITHOUT THE KEY NEAR THE CAR ????? IM SCARED OF MY CAR GETTING STOLEN.
It is a proximity sensor system meaning the systems brain cannot activate without the key fob being near by. So no it can't
@@JMRRebuilders nice thanks! i dont want someone to get into my door somehow and jusst be able to push the button and drive away if im not near the car
How flexible is the proximity lock system? Unlock is awesome but I think I’d rather have manual control over locking. If you’re getting in/out a bunch, the locking might get annoying.
Push button start and the proximity locks are something I thought was dumb until we bought my wife’s Edge. I also thought remote start was dumb until I had it 🤦🏻♂️
Great work as usual guys, how much more do you have until it’s “done”? Are you doing paint, vinyl wrap or leaving as-is?
Hey brother thanks for the support. The proximity sensor aren't adjustable at all. Best if working on it to leave key in cab.
Yeah that remote start auto unlock and push button really make it nice and convenient.
We are hoping to start body work soon then and complete paint. We do have the ac to finish next video. Then once paints done a couple more upgrades and she's done.
@@JMRRebuilders also cool the fobs look like they kind of resemble a Ford factory fob. Looking forward to the next one!
No key at all!? So someone can just hop in an take off? Lol
Edit: ok you do have to have the fob still good stuff
Well that wouldn't be good. There's a key fob. Gotta have that. Thanks for the comment
That's cool and all but you did not show us what you learned on HOW TO INSTALL the damn thing... which wires go where. What was the point of this video without the info?
Entertainment bud.
5 wiers
Thanks for the comment. Not sure what your referencing.
this wasn’t even helpful. no color schematics or in detail install, just laughing
The point of the video. Isn't a how to install. Especially considering it is in a coyote swapped 95 f150. Either way thanks for comment and support
@@JMRRebuildersi get that it’s swapped. but you still reused the factory harness for the push start from what it looks like. Just wanted some insight on how to install a push to start on my truck. Thanks for the Reply.
At the very end... was it the truck that was starting up via the remote?
Ya buddy. Pretty slick. Thanks for the comment Ron
Anybody going to point out the racist thing he did? Chinese really? I'm not even asian..
Thats because the majority of people don't allow nonsensical things to trigger them. Unfortunately it has and I'm sure somewhere deep in your personal life experience there is a tender moment that needs some time alone working through your personal struggle. Welp this ain't that place. Either way thanks for watching then commenting. It really helps us and the algorithm. Keep being you and try not to allow pointless nonsensical comedy affect you in such a way you might be better off. Either way you do you boo
@@JMRRebuilders I'm not even going to read your whole statement because it's already immature and non-empathetic because it's not about nonsensical things it's about being empathetic and knowing certain things can affect certain people like if I call you a white devil it doesn't matter if it's nonsensical or it doesn't affect you it's the fact that it's offensive so please be a grown up and let's just be kind to one another because if you can't do that then just go on being racist because you're just another racist person just trying to validate their racist statement. 😂😂😂😂😂😂
Mic drop 😂
its ok big guy your allowed to think what you want. By the way I did read your comment because I don't have to like you or your statement to show you common decency. I'll work on worrying about how what I say affects your feelings. How about this you work on not caring so much about things that have 0 real impact. Also just want to point out we film in America and in the country of America we have freedom of speech which is a truly remarkable thing. While I know society is softening and the lies that freedom of speech is harmful to some people primarily people like you who aren't as you say Asian being offended by comedy. Its funny you throw around acquisitions or inflammatory words as if you have a clue of the severity of them and then lecture me on the same thing. At the end of the day big guy im sure you need some personal space and time to really process your tender feelings and if you need to do that here bro safe space. You be you boo. Also I personally have no desire to 1. grow up, 2. validate myself to you 3. remotely care that certain things affect people. You say grow up yet here we are talking about how a joke on a youtube channel has so deeply offended you to the point that you cant even engage in grown up behavior and read the opposing sides comment. Either way brother im sure your a big boy and put your big boy pants on one leg at a time and somewhere inside in a deep tender spot there is a child who desperately wants to be loved and accepted. Its ok big guy feel free to be you boo.
@@JMRRebuilders I'm still not reading 2 words past your dumb statement. Except your racism statement and own up to it buddy 👍🏾💪🏾
Found 89 Ford wiring diagram on bulldog security .com
Good deal brother.